E-series barra

This is a general discussion forum, open to all participants

E-series barra

Postby Tickford01 » October 1st, 2017, 3:22 pm

what would be the best way to get are barra in to xh loungrech with t5 trany
Tickford01
Cranking Over
 
Posts: 1
Joined: October 1st, 2017, 2:50 pm
Has Liked: 1 time
Been Liked: 0 time

Re: E-series barra

Postby P100_Ute » January 29th, 2018, 1:22 pm

Notch the front of the sump to clear the K-Frame... get a AU T5 bellhousing.. Drill a hole in the side of the sump for clutch cable to go through to the bellhousing.. Attach the gearbox... open bonnet and lift engine in with a Crane... do up a few bolts.. install radiator and hoses and fill with coolant. fill up engine and gearbox with correct oils.. connect a couple wires and turnkey and enjoy..
P100_Ute
Cranking Over
 
Posts: 2
Joined: November 17th, 2010, 10:58 am
Has Liked: 0 time
Been Liked: 0 time

Re: E-series barra

Postby Fingers » February 2nd, 2018, 3:53 pm

This last bit might be a touch more involved


"connect a couple wires and turnkey and enjoy.."
Richard
User avatar
Fingers
Idling
 
Posts: 72
Joined: December 21st, 2010, 12:27 pm
Location: Old Junee, NSW
Has Liked: 17 times
Been Liked: 5 times

Re: E-series barra

Postby fordpatto » February 2nd, 2018, 4:59 pm

Try Everything Barra, looms and flash tunes.
They can probably help you.
Cheers Brian.
User avatar
fordpatto
Cruising
 
Posts: 376
Joined: January 25th, 2009, 11:48 am
Location: ballina
Has Liked: 51 times
Been Liked: 39 times


Return to General Discussion

Who is online

Users browsing this forum: No registered users