Page 1 of 1
setting the timing chain in the ef falcon 4 ltr
Posted:
June 23rd, 2009, 11:35 pmby linsay77
How to set the cam and ignition timing after rebuilding a ef/el 4 ltr engine , also is it possible to run a standard comp with a 15 psi turbo set-up that is on lpg only?
Re: setting the timing chain in the ef falcon 4 ltr
Posted:
June 24th, 2009, 5:46 pmby Rollin
You really should get a gregories or something, it's too hard to explain in a post.
The car will be fine to run 15psi.
Re: setting the timing chain in the ef falcon 4 ltr
Posted:
June 25th, 2009, 7:54 pmby galapogos01
It's not that hard, is it? I'm pretty useless but I managed to do mine.
Line up the Crank sprocket and Aux Drive sprocket markers to face each other. With these facing each other, the cam sprocket mark should be 3deg above the head on the RHS.
Jason
Re: setting the timing chain in the ef falcon 4 ltr
Posted:
June 25th, 2009, 8:04 pmby krisisdog
3 deg or 3mm above the head? eh one of the two...