Boosted Falcon

Posted: **July 27th, 2009, 5:59 pm**

Something I have been working on after work. Trial and error. Taken me around 4 hours to get this far, tried a few different things and they have not worked. So had to start again. Slowly getting to what I want it to be like.

SnyperEB

Posted: **July 27th, 2009, 6:34 pm**

that looks mint as..

Posted: **July 27th, 2009, 6:37 pm**

lookin good!

u still doin the airbrushing?

Posted: **July 27th, 2009, 6:38 pm**

I think I just creamed my pants....that looks awesome man,
Wanna do mine:)?
Could you write up how you did it and what tools materials u used?
Cheers
-Ash

Posted: **July 27th, 2009, 6:40 pm**

u could do mine aswelll come to think of it

Posted: **July 27th, 2009, 6:43 pm**

Needs to have "INTERCEPTOR" stenciled on it.

Posted: **July 27th, 2009, 8:10 pm**

Commando wrote:Needs to have "INTERCEPTOR" stenciled on it.

lmao!

Looking good Shaun :good:

Posted: **July 27th, 2009, 8:52 pm**

LOL, mate of mine did that to his, took him 20-30mins at his work.

Posted: **July 27th, 2009, 8:55 pm**

for a rocker cover, its pretty fkn mean looking. :thumbsup:

Posted: **July 27th, 2009, 9:56 pm**

Amon wrote:lookin good!

u still doin the airbrushing?

Yeah mate ill be getting back into the airbrushing once we move into the new place I have no room where I am now.

Hybrid34 wrote:I think I just creamed my pants....that looks awesome man,
Wanna do mine:)?
Could you write up how you did it and what tools materials u used?
Cheers
-Ash

Ill try I have it easy, I work for a company who deal in cutting, grinding, milling and polishing tools etc. So I get to use the training room for free after work. Useing all the good machinery and stuff.

Posted: **July 27th, 2009, 10:16 pm**

looks mint man :good:

Posted: **July 27th, 2009, 11:28 pm**

[Sterling] wrote:LOL, mate of mine did that to his, took him 20-30mins at his work.

wow ! 20-30 minutes to get in all the crevices, roughing and finishing , your mate is pretty good !

Posted: **July 28th, 2009, 12:56 am**

Yeah I reckon.

If it's as good as the rocker cover in the top pic I'll send him down an XR one to do. $100 should cover it?

Posted: **July 28th, 2009, 7:58 am**

Mr. CVE wrote:
[Sterling] wrote:LOL, mate of mine did that to his, took him 20-30mins at his work.

wow ! 20-30 minutes to get in all the crevices, roughing and finishing , your mate is pretty good !

Cheap looking work only takes 30-40 minutes Paul.

Posted: **July 28th, 2009, 9:13 am**

SnyperEB wrote:
Mr. CVE wrote:
[Sterling] wrote:LOL, mate of mine did that to his, took him 20-30mins at his work.

wow ! 20-30 minutes to get in all the crevices, roughing and finishing , your mate is pretty good !

Cheap looking work only takes 30-40 minutes Paul.

ill take some photos if yas like lol, he's a metal polisher or someshit.

Posted: **July 28th, 2009, 9:15 am**

I liked the rocker cover but I was not a fan of the interceptor part lol.

Posted: **July 28th, 2009, 10:21 am**

I may need you to do some bits for me shaun.

Posted: **July 28th, 2009, 11:53 am**

BROCKYB8 wrote:I may need you to do some bits for me shaun.

Dont you have a mate who does that kinda stuff!!?

Posted: **July 28th, 2009, 12:11 pm**

looks awesome mate

Posted: **July 28th, 2009, 12:22 pm**

What they said :good:

Posted: **July 28th, 2009, 12:29 pm**

Cheers guys for the comments.

I did the entire inlet side today at lunchtime came up pretty awesome. Just trialing a few things on the fins and the writing on the front of the cover.

Posted: **July 28th, 2009, 12:59 pm**

It helps when you have abrasives at your disposal!

Posted: **July 28th, 2009, 4:26 pm**

yeah all that nice stuff that you have in your catalog, i often sit here at work think of what i could order, never do coz that shit is expencive.

As for the cover, looks good keep it up.

Posted: **July 28th, 2009, 6:47 pm**

EL302 wrote:yeah all that nice stuff that you have in your catalog, i often sit here at work think of what i could order, never do coz that shit is expencive.

As for the cover, looks good keep it up.

Yeah you do pay a premium for the Pferd stuff but you do get quality and longer life out of the product too.

Posted: **July 29th, 2009, 4:46 pm**

that and i don't think we're on the best discount with you, since we deal with your opposition(spelling) bordo and klingspor.

Posted: **July 29th, 2009, 5:42 pm**

What company do you work for mate?

Posted: **July 29th, 2009, 6:55 pm**

Statewide Bearings

Posted: **July 29th, 2009, 9:16 pm**

Oh ok no worries yeah all depends on how much stock of our you move really. Which pends on the discount that you get.

Posted: **August 13th, 2009, 9:09 pm**

Posted: **August 13th, 2009, 9:25 pm**

niice, whens it goin on?

Posted: **August 13th, 2009, 10:06 pm**

Couple of weeks Im waiting for some polishing gear to come over from germany so I wont be touching it till monday ish. then Ill finish it and put it on.

Posted: **August 13th, 2009, 10:18 pm**

How many hours has that taken you all up so far?

Looks good.

Posted: **August 13th, 2009, 11:56 pm**

....i hate you....

looks awesome. good job.

Posted: **August 14th, 2009, 3:04 am**

That looks really impressive, nicely done

Posted: **August 14th, 2009, 7:46 am**

Dansedgli wrote:How many hours has that taken you all up so far?

Looks good.

All up maybe around 7 hours maybe more I have not really been keeping an eye on it.

Posted: **August 14th, 2009, 8:51 am**

SnyperEB wrote:
BROCKYB8 wrote:I may need you to do some bits for me shaun.

Dont you have a mate who does that kinda stuff!!?

THis stuff no. I do have a powder coater not a polisher.

I think ill need yuou to do some of the xf bits

Posted: **August 14th, 2009, 11:28 am**

BROCKYB8 wrote:
SnyperEB wrote:
BROCKYB8 wrote:I may need you to do some bits for me shaun.

Dont you have a mate who does that kinda stuff!!?

THis stuff no. I do have a powder coater not a polisher.

I think ill need yuou to do some of the xf bits

LOL make sure you bring you wallett to pay for the polishing stuff not labor.

Im going to be selfish though Scott and say this is the only one im doing.

Posted: **August 16th, 2009, 9:53 am**

looking good man. the inlet looks like it will come up a treat. silly question but are you a polisher by trade?

Posted: **August 16th, 2009, 9:57 am**

Na mate I work for a company that deals in sanding, cutting, grinding and polishing tools. I am just out the back in the training room after work trying out stuff and mucking around.

Posted: **August 16th, 2009, 10:55 am**

nice work looks farkin nice. i would not have the patients to do that though good job

Boosted Falcon

Something I have been working on after work.

Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.

Re: Something I have been working on after work.