Boosted Falcon

http://cgi.ebay.com.au/WOW-THIS-IS-A-HO ... 3cabf3f80a

ahem.

So many lols

SORRY TO SELL THIS TUFF UTE!!!!!! EVERYTIME I STOP AT THE LIGHTS SOMEONE ALWAYS SAYS "HEY WHAT'S IN THAT FU#KING THING!!! " THEY DONT BELIEVE ME WHEN I SAY ITS JUST A SIX!!!!

no.

Such an epic fail.

15k and only making that much. How sad

Is that on the tree transmisson?? OMFG FAIL

Wtf is a vaccum pump.

donk's with big cams have terrible vacuum at idle, meaning at low rpm's the brake's dont work well. a vac pump can be fitted between intake manifold and booster to help. I think you can also run a tank or canister system

id rather spend 15k on turboing an e-series an getting around 300rwk.

not worth 15k....!!!

"sounds like a blown out eight!"

Does he mean like a rod out the side?

sweet Jesus, and to think this guy is allowed to drive on our roads!

hahahahahahahahahahahahahaha what a fucking clown.

Hiboost wrote:id rather spend 15k on turboing an e-series an getting around 300rwk.

yeah same here

what a deadbeat. sif spend 15k on a n/a 6 motor

Is that frd906 with his $10k crank?

They are probably asking what the hell is in it because it sounds like a heap of shit.

the polishing on top would be worth at least $5k

nice ute, but damn he got ripped big time with the engine lol


spent 15k on the engine but didnt spend a cent on the interior...

I made 154kw, and it cost me:
3 inch exhaust and Pacie comps - $1200
Cam - $550
Vernier gear - $220
3 inch Intake - $40
KandN Xstream pod - $75
Ported Head with JMM springs and retainers - $200 off a friend who went back to stock
Ballistic Cat - $227
Ticky snorkle - $27 when Ford still had them
3.5inch dump tip - Found it on the highway
Walbro GSS341 pump - $164
Flash Tuner - $595
Chiptorque tune - $400

Total - $3698

Thats also with 3.9's and a 2500 (meant to be 3000) stallie.

This guys got raped.

Wow that makes JMM's $8000 175kw sound like a bargain.

Malakai wrote:Wow that makes JMM's $8000 175kw sound like a bargain.

Which loser spends 8k for a NA when u can get a snort kit for 3-4K or even a 2nd hand one for cheep an still make more than 175kw.

Hiboost wrote:

Malakai wrote:Wow that makes JMM's $8000 175kw sound like a bargain.

Which loser spends 8k for a NA when u can get a snort kit for 3-4K or even a 2nd hand one for cheep an still make more than 175kw.

A very deluded one, lol.

hahaha, what a fuckin loser!!!

Ive asked him for a list of whats done. This is going to be interesting.

if he thinks it sounds like an 8 y woudlnt just buy an 8 so it does for 15k haha

jarryddelany wrote:if he thinks it sounds like an 8 y woudlnt just buy an 8 so it does for 15k haha

Maybe he didnt go to school either?

Dansedgli wrote:

jarryddelany wrote:if he thinks it sounds like an 8 y woudlnt just buy an 8 so it does for 15k haha

Maybe he didnt go to school either?

Fucking LOL

I cant belive all of you guys. Cant you read? It says its FULLY worked. There isn't anything else you could do to it, **** it could probably do your taxes.


I'm off to find out about finance.

lol i had 150.5rwkw from au motor. wade cam, some cheaps ass extractors, catback and a pod.prob cost like 1k max.

I'm not sure if its just me but it doesnt mention any power figures in the ad, unless you sent him a Q old_mate?

the ad was modified yesterday, probably cos so many kents emailed him telling him they can get 150rwkw for $1500, as opposed to $15 000.

T2TE50's daily?

"HEY WHAT'S IN THAT FU#KING THING!!! "
"15K"

old_mate wrote:the ad was modified yesterday, probably cos so many kents emailed him telling him they can get 150rwkw for $1500, as opposed to $15 000.

Makes sense, poor guy if the 15k figure is true though, that workshop would have made a motza out of him.

I wouldnt be thanking any mehcanic who got me 157rwkw for my 15k.

15k would have bought him a xr6t... could have towed the au quicker than what that 157kw would do...

15k would of got him soemthing like this:
-MoTeC M4 clubman $2500 fitted an tuned.
-turbo manifold $1100-1450
- garrett gt35/40 turbo $1900
-turbosmart wastegate$ 600
- forged pistons $1,090
-forged rods $1,100
-siemens 650cc injectors $330
- machine block+ bearings+balancing $1500
- v-springs/cam $600
- BTR auto built to handle power $2000
-intercooler/3" pipes $600
- Labour(bolt everything up an install into car) $1000?
total cost $14670 ( thats with the $1450 turbo manifold)


still needs:

-exhaust
-waterpump
-gaskets
-welch plugs
-catchcan
-fuel system ( fuel pump/fuel reg)

donno if im missing anything?

Som slightly related information if you squint and tilt your head at just the right angle. BF MKII XR6T Manual's with around 70,000 ks are under $25,000 asking now... interesting.

lol, check his other listings, he has a au motor hes selling, pic is the same engine bay pic from the ute auction...