Page 1 of 1
tickford head vs standard
Posted:
August 13th, 2010, 7:25 pmby doey
is there anything i can do to my standard head on my xg ute to make it just as powerful if not more powerful than a tickford head with out spending over $500?
Re: tickford head vs standard
Posted:
August 13th, 2010, 7:31 pmby misk
the biggest advantage that a tickyford head would have is the larger exhaust valves.
buy a standard AU head from the wreckers as they all have 1mm larger exhaust valves and spend the rest on a cheap port job and it will be better than a tickford head.
Re: tickford head vs standard
Posted:
August 13th, 2010, 8:32 pmby doey
what about VCT? will i have to do anything with that or is that just in the head?
Re: tickford head vs standard
Posted:
August 13th, 2010, 8:35 pmby misk
just dont get a VCT head
Re: tickford head vs standard
Posted:
August 13th, 2010, 8:47 pmby doey
so the VCT does that have stuff to with the block as well?
Re: tickford head vs standard
Posted:
August 13th, 2010, 9:11 pmby Phillis
vct- headfu(k
Non vct- your friend
Re: tickford head vs standard
Posted:
August 13th, 2010, 9:12 pmby edfairmont4.0
AU head - win.
Re: tickford head vs standard
Posted:
August 16th, 2010, 9:41 pmby ebxr8240
The early E.B /E.L have the better, bigger ports..
If you swapped the thiner A.U valves while opening port just under seat, with A.U guides etc with the lighter valve gear you would
have the best of the two heads...
Esp with performance cam etc....
The T series had higher compression.. Which should be considered if overhauling with
ACL race series kit... Or forced induction..
Re: tickford head vs standard
Posted:
August 16th, 2010, 11:22 pmby Rollin
doey have you already done the usual cam/chip/exhaust mods? If you haven't got a cam it's not worth pulling the head because you'll get stuff all extra power for a lot of pains in the asshole.
Re: tickford head vs standard
Posted:
August 16th, 2010, 11:25 pmby krisisdog
If you want an AU head PM me, I've got a spare.
Re: tickford head vs standard
Posted:
August 19th, 2010, 11:30 amby ausedwagon
cam and chip!
Re: tickford head vs standard
Posted:
August 22nd, 2010, 2:26 amby Mr_White_Ea
Hey guys i am currently building a duel fuel turbo ea and i would like to know which would be best for a low boost setup.
tickford heads have bigger exhaust vavles but how much bigger are they then a standard head,and are they really worth buying rather then doing some head work ?
I read the above thread and a few people mentioned that a Au non VCT head is a good option too.
Also if you change the head to a tickford or Au head in a 3.9litre do you have to upgrade the cam and valves and springs and ect ?
cheers.
Re: tickford head vs standard
Posted:
August 22nd, 2010, 7:41 amby misk
the exhaust valves are 1mm over i think.
as said, go an AU head and get some work done, or do what ebxr mentioned.
you can use earlier model rocker gear/cam on the AU head also.
Re: tickford head vs standard
Posted:
August 22nd, 2010, 9:56 amby Rollin
If you can get a tickford head for a decent price (Maybe $200 or so) then it's worth it, but other than that on a turbo setup it's not really a major concern - my car made 400rwhp with a stock ED head and cam, just upgraded valve springs.
You're better off getting a reground cam for your existing head if you want to help it make more power.
Re: tickford head vs standard
Posted:
August 22nd, 2010, 4:07 pmby Mr_White_Ea
So what would you guys recommend for a reground cam and how much does that cost.
Also is it hard to make bigger exhaust valves and what head work would you recommend for a low boost setup.
And if i went Au head for example could i still use my current running gear thats inside the 3.9 head and would it raise my compression ?
Re: tickford head vs standard
Posted:
August 22nd, 2010, 4:11 pmby Dansedgli
Dude do a search.
You are over your noob question quota for the year.
Re: tickford head vs standard
Posted:
August 22nd, 2010, 4:56 pmby Mr_White_Ea
Dansedgli wrote:Dude do a search.
You are over your noob question quota for the year.
I just want to find out whats the best head to go for before i go out and buy one. Also trying to work out if its even worth the time and effort.
Re: tickford head vs standard
Posted:
August 22nd, 2010, 5:37 pmby Rollin
Rollin wrote:If you can get a tickford head for a decent price (Maybe $200 or so) then it's worth it, but other than that on a turbo setup it's not really a major concern - my car made 400rwhp with a stock ED head and cam, just upgraded valve springs.
You're better off getting a reground cam for your existing head if you want to help it make more power.
Re: tickford head vs standard
Posted:
August 22nd, 2010, 5:47 pmby Dansedgli
Mr_White_Ea wrote:Dansedgli wrote:Dude do a search.
You are over your noob question quota for the year.
I just want to find out whats the best head to go for before i go out and buy one. Also trying to work out if its even worth the time and effort.
And searching wont fix this how?
Re: tickford head vs standard
Posted:
August 22nd, 2010, 5:50 pmby Mr_White_Ea
dw i already made my mind up.
going with a tickford head with a reground.