Boosted Falcon

Posted: **January 3rd, 2008, 9:58 am**

Hey all, what other parts would i need to change the gearbox from a 3 speed to 4 speed, Cheers

Posted: **January 3rd, 2008, 5:40 pm**

what other parts other than the other ones you already have?

I'll start. You'll need a transmission

Posted: **January 3rd, 2008, 5:44 pm**

probly just a 4th gear?

Posted: **January 3rd, 2008, 5:55 pm**

or just put the later gear selector panel into it.

Posted: **January 3rd, 2008, 6:21 pm**

try believeing you have a 4th gear, law of atraction people!!!
http://www.youtube.com/watch?v=Pirdx5rk2iQ

Posted: **January 3rd, 2008, 7:30 pm**

You will need Transmission, TCM ( Trans Control Module) as the 4 speeds are an electronic box ( 3 speed are mechanical with a kickdown cable) ECU, Looms, Gear selector panel, custom cross member mount I think that's most of it. It's a lot of effort for not much gain.

Also to make the most of it you will probably need to replace the differential for one with shorter gears as yours probably has a 2.77:1 ratio.

Posted: **January 3rd, 2008, 8:06 pm**

kester94EF wrote:try believeing you have a 4th gear, law of atraction people!!!
http://www.youtube.com/watch?v=Pirdx5rk2iQ

They crashed a perfectly good ED wagon- bastards!

You could try putting a single rail BW 4Speed gearbox in

Posted: **January 3rd, 2008, 8:07 pm**

lol i kno but its piss funny

Posted: **January 3rd, 2008, 9:34 pm**

why not convert to manual?

Posted: **January 4th, 2008, 7:16 pm**

Stuff it i'll just chuck the 3 back in it, got quoted $220 + 3 month warranty. Thanks guy's.

Posted: **January 4th, 2008, 10:58 pm**

also requires bashing of the floor pan to fit 4 speed in!

Boosted Falcon

3 speed to 4 speed

3 speed to 4 speed

Re: 3 speed to 4 speed

Re: 3 speed to 4 speed

Re: 3 speed to 4 speed

Re: 3 speed to 4 speed

Re: 3 speed to 4 speed

Re: 3 speed to 4 speed

Re: 3 speed to 4 speed

Re: 3 speed to 4 speed

Re: 3 speed to 4 speed

Re: 3 speed to 4 speed