Page 1 of 1
turboing ed

Posted:
January 21st, 2008, 7:23 pm
by burnt turtle
hi every1 i no there is alot of turbo falcons around so i though i would ask wat sorts of turbo kits r there available for an ed, from most minor stuff req to about the most u can do, does any1 have this sorta info 2 share wit me? any help would be appreciated
thanks guys josh
Re: turboing ed

Posted:
January 21st, 2008, 7:36 pm
by Jake
Re: turboing ed

Posted:
January 21st, 2008, 7:40 pm
by BI6TIM
Snort Performance is the best place for the hardware IMO.
As for all the other stuff I would recomend you have a read through some of the build threads as it's all been covered in that area.
Re: turboing ed

Posted:
January 24th, 2008, 11:53 am
by burnt turtle
BI6TIM wrote:As for all the other stuff I would recomend you have a read through some of the build threads as it's all been covered in that area.
thanks guys, is there any in particular u suggest 2 look at?
Re: turboing ed

Posted:
January 24th, 2008, 11:55 am
by burnt turtle
do these kits include all req or is there still more needed?
Re: turboing ed

Posted:
January 24th, 2008, 1:14 pm
by EF ECTIV
kits arent complete, few extra things needed..... Induction piping for a start

Re: turboing ed

Posted:
January 24th, 2008, 1:35 pm
by BRADMAN
Snort Performance are great to deal with
Kits include most things except for stuff that requires modification
NEEDS
Intake piping
Tad of exhaust piping
Fuel & Vacuum Line
as for other things to add to make you car go after buying a kit.
Exhaust
Cam
Tune
Stall Converter
AfterMarket ECU / Injectors
Diff change
Auto to Manual Conversion - if applies
More Boost!
brad
Re: turboing ed

Posted:
January 25th, 2008, 7:17 am
by burnt turtle
wats the most minor amount req to have an everyday driver with turbo, such as do u have to put after market ECU in or will it run wit standard 1?
Re: turboing ed

Posted:
January 25th, 2008, 8:58 am
by BRADMAN
no, i will be running with stock computer.
on aff a guy called 3.9from_hell ran 168rwkw out of a stock ecu with no big mods. he ran a stock standard EL engine with NO aftermarket cam. i think he only ran a 2-2.5inch exhaust as well.
so it can be done for cheap.
keep an eye out for my updates...ill be running stock ecu for my setup. which will be install asap.

brad
Re: turboing ed

Posted:
January 25th, 2008, 1:33 pm
by burnt turtle
so wat kinda price would i be able 2 get a turbo set-up runnin 4?
Re: turboing ed

Posted:
January 25th, 2008, 1:38 pm
by needfordspeed
Budget $5k+
Re: turboing ed

Posted:
January 25th, 2008, 1:53 pm
by burnt turtle
evan though the snort packages start from $3k dont they
Re: turboing ed

Posted:
January 25th, 2008, 1:57 pm
by stevo
whens the paint get finished man ?
Re: turboing ed

Posted:
January 25th, 2008, 2:29 pm
by burnt turtle
dunno he didnt give me a date.


went past the otha day a took these look like it won't be till mid next week
wat happened 2 urs u sed it was off coz of steering rack huh? i saw it out the front of urs last nite.
Re: turboing ed

Posted:
January 25th, 2008, 2:32 pm
by stevo
yeah i took it to enterprise ave to get it fixed yesterday, its back there today
Re: turboing ed

Posted:
January 25th, 2008, 2:41 pm
by burnt turtle
awesome, just in time 4 the cruze,
u goin its 2moro isn't it?
Re: turboing ed

Posted:
January 25th, 2008, 2:51 pm
by stevo
nah have a party to go to instead
Re: turboing ed

Posted:
January 25th, 2008, 2:59 pm
by burnt turtle
u goin 2 the meet on the 17th? is any1 organising a cruze ova there? i got three otha e-series mates cumin wit me.
Re: turboing ed

Posted:
January 25th, 2008, 3:06 pm
by stevo
do you mean All Ford Day? if so no im not going to go to that this year
Re: turboing ed

Posted:
January 25th, 2008, 3:20 pm
by burnt turtle
so otha then the stuff in the $3k pack and some piping do ya think there would be any more req BRADMAN?
Re: turboing ed

Posted:
January 25th, 2008, 3:27 pm
by burnt turtle
so otha then the manifold, pod intake, turbo and some piping is there anythin else i would need 2 run a mild set-up?
Re: turboing ed

Posted:
January 25th, 2008, 4:56 pm
by BRADMAN
the snort kit includes pod & intake pipe to turbo
all you need is piping from turbo to intercooler....intercooler to intake system (bbm or ea-ed)
and some vacuum line & some fuel line.
brad
Re: turboing ed

Posted:
January 25th, 2008, 5:19 pm
by burnt turtle
wat about oil supply 2 turbo? i mean i no that it comes wit oil line but where would u get ur oil supply from? and when it sez water and oil cooled wat do they mean both?
wat is the fuel line 4?
Re: turboing ed

Posted:
January 25th, 2008, 8:27 pm
by private9
Then you need to eventually allow for fuel system changes (pump and injectors), ECU, exhaust and then gearboxes depending on how far you want to go.