650hp for 2013 Mustang GT500

This is a general discussion forum, open to all participants

650hp for 2013 Mustang GT500

Postby Troutman » November 15th, 2011, 11:10 pm

http://blogs.hotrod.com/ford-releases-d ... 16853.html

Well, there it is. Ford’s new GT500 powerplant that HOT ROD got to see first hand in Detroit. It’s bigger, at 5.8L, and it’s badder, thanks to a TVS2300 supercharger. At 650hp and 600lb-ft of torque it’s officially the world’s most powerful production V8 engine and is promising to deliver a 200+mph top speed to the 2013 GT500 it will be powering. The Detroit Supercar war is on, and you can’t help but imagine that the Corvette ZR-1 was the intended target of this road rocket. We’ll bring you more details later, but first, here’s the bullet points from Ford’s press release.

Image
'98 Crown Victoria + '07 Caprice
User avatar
Troutman
Cruising
 
Posts: 450
Joined: January 18th, 2009, 9:18 pm
Has Liked: 13 times
Been Liked: 46 times

2007 Holden Caprice

Re: 650hp for 2013 Mustang GT500

Postby Ef_frmnt » November 15th, 2011, 11:39 pm

GTHO?
XD Falcon 427ci - long term drag (in-and-out-of-shed) car project
1992 Ford Courier LS1, big cam, big stall, big nitrous, and soon to be packing a big turbo..
PX MKii Wildtrak 20" Monster wheels with 33x10 tyres, Fox Shocks, custom stereo install, ARB Summit rear bar
User avatar
Ef_frmnt
Full Boost
 
Posts: 2069
Joined: July 24th, 2007, 7:50 pm
Has Liked: 157 times
Been Liked: 257 times

Re: 650hp for 2013 Mustang GT500

Postby misk » November 15th, 2011, 11:47 pm

worlds most powerful production V8 which wont be in production until 2013?
thats works :good:

those headers are a work of art lol
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger

soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing

XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities :)
User avatar
misk
Melting Pistons
 
Posts: 10047
Joined: October 14th, 2008, 10:31 am
Location: dandenong
Has Liked: 298 times
Been Liked: 295 times

Re: 650hp for 2013 Mustang GT500

Postby Troutman » November 16th, 2011, 8:37 am

Under the American system, 2013 means released in 2012... in theory as soon as a few months away.

HSV is rumoured to be planning the 556HP (415 kW) LSA engine for some variant (only seen this on forums though) so as for the Falcon, who knows?
'98 Crown Victoria + '07 Caprice
User avatar
Troutman
Cruising
 
Posts: 450
Joined: January 18th, 2009, 9:18 pm
Has Liked: 13 times
Been Liked: 46 times

2007 Holden Caprice

Re: 650hp for 2013 Mustang GT500

Postby EFFalcon » November 16th, 2011, 8:41 am : Eb Barbie Likes this post

now if only they'd relax LHD laws over here to make it easier to get one cheap
User avatar
EFFalcon
Site Admin
Site Admin
 
Posts: 14797
Joined: June 4th, 2007, 8:26 pm
Location: Carrum Downs
Has Liked: 26 times
Been Liked: 766 times

1995 Ford Falcon

Re: 650hp for 2013 Mustang GT500

Postby TUFED6 » November 16th, 2011, 8:46 am

Shit just got real.

Looks like 4 bolt mains in the steel block? Crank looks to run nice and high in the block. :thumbsup:

Yeah lol at the headers, wheres the throwup smiley face.
User avatar
TUFED6
Full Boost
 
Posts: 2926
Joined: July 13th, 2007, 12:21 pm
Location: I put the fuk into shima
Has Liked: 2 times
Been Liked: 434 times

1994 Ford Falcon

Re: 650hp for 2013 Mustang GT500

Postby misk » November 16th, 2011, 9:01 am

Troutman wrote:Under the American system, 2013 means released in 2012... in theory as soon as a few months away.

HSV is rumoured to be planning the 556HP (415 kW) LSA engine for some variant (only seen this on forums though) so as for the Falcon, who knows?


ahh gotchya.
sorry didnt mean to sound look a douche lol.
its good to see ford stepping up a bit though!
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger

soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing

XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities :)
User avatar
misk
Melting Pistons
 
Posts: 10047
Joined: October 14th, 2008, 10:31 am
Location: dandenong
Has Liked: 298 times
Been Liked: 295 times

Re: 650hp for 2013 Mustang GT500

Postby SnipeZ » November 16th, 2011, 9:37 am

On my wish list
1998 EL XR6 - Stolen
1997 EL Fairmont V8 - Current
5.0 V8
Full Leather
EL GT Headers
2"1/2 Twin System
FPV Dark Argent
Full Tickford Lip Kit
Low :)
Soon To Be Manual
User avatar
SnipeZ
Hitting N2O
 
Posts: 3838
Joined: May 3rd, 2008, 11:49 am
Has Liked: 235 times
Been Liked: 170 times

Re: 650hp for 2013 Mustang GT500

Postby EF ECTIV » November 16th, 2011, 4:08 pm

winning....


First thing I noticed was those shitty headers; should be good for a few more hidden horsies....
EF ECTIV
Coming Soon: Ford Strokers 363 Windsor, BorgWarner s400 sx3 76mm, 60mm Turbosmart gate, TH400 box, Kaaz diff


2013 G6E Turbo

Stock daily

Allfast Torque Converters 08 9249 3066
User avatar
EF ECTIV
Breaking Traction
 
Posts: 1919
Joined: August 22nd, 2007, 4:30 pm
Has Liked: 166 times
Been Liked: 67 times

Re: 650hp for 2013 Mustang GT500

Postby Ef_frmnt » November 16th, 2011, 4:30 pm

TUFED6 wrote:Shit just got real.

Looks like 4 bolt mains in the steel block? Crank looks to run nice and high in the block. :thumbsup:

Yeah lol at the headers, wheres the throwup smiley face.



Would be 6 bolt going by the bolts along the side....? just a guess but they seem pretty close to the caps


edit: definitely a deep skirt on that block though.. should be good for some serious power
XD Falcon 427ci - long term drag (in-and-out-of-shed) car project
1992 Ford Courier LS1, big cam, big stall, big nitrous, and soon to be packing a big turbo..
PX MKii Wildtrak 20" Monster wheels with 33x10 tyres, Fox Shocks, custom stereo install, ARB Summit rear bar
User avatar
Ef_frmnt
Full Boost
 
Posts: 2069
Joined: July 24th, 2007, 7:50 pm
Has Liked: 157 times
Been Liked: 257 times

Re: 650hp for 2013 Mustang GT500

Postby barryjacks » November 29th, 2011, 3:55 pm

Great job Ford! I'd love to drive this car! :) In the past few years, American car manufacturers have seen a rebirth of sorts for some of their vintage vehicles, resuscitating classic cars with new features. They've also began an arms race for horsepower, packing the modern street rods with dizzying amounts of power. Chevrolet is launching a 580-horsepower Camaro, and Ford recently disclosed some information on the 2013 Shelby GT Mustang. The brand new Shelby GT will produce 650 horsepower and top 200 miles per hour. I've read the article here: Horsepower arms race is on with 2013 Ford Shelby GT Mustang.Apparently,the technology offered in it's class is far superior. I'm curious on price point.I'm sure the price will be enough to choke a horse though. :grin:
User avatar
barryjacks
Cranking Over
 
Posts: 1
Joined: November 29th, 2011, 3:50 pm
Has Liked: 0 time
Been Liked: 0 time


Return to General Discussion

Who is online

Users browsing this forum: No registered users

cron