Boosted Falcon

Posted: **August 8th, 2013, 10:23 pm**

hey guys,

been wanting to change the look of the daily for a while now. would love to get some nice fitment happening. currently looks like this

just after some ideas on what wheel size, offset ect and what height other people are running.

so show me your e series with stance/fitment

cheers

Posted: **August 8th, 2013, 11:12 pm**

Looks soooo gay on a falcon unless its 100% spot on

Posted: **August 9th, 2013, 12:18 am**

18x8.5 -4 and 18x10 -4

Posted: **August 9th, 2013, 7:09 am**

Posted: **August 9th, 2013, 8:22 am**

Happen to know the sizes on the EF? Looks like 10s on the rear and 8s on the front??

Posted: **August 9th, 2013, 8:32 am**

one of my fav photos...

Posted: **August 9th, 2013, 9:08 am**

My favourite.

Cheers

Posted: **August 9th, 2013, 9:27 am**

Not the best photo, bit I always liked the look of Malakai's AIT.

If I were you though, I wouldn't change a thing on yours.

Posted: **August 9th, 2013, 3:34 pm**

That EF is definately 10's front, 12's rear

Posted: **August 9th, 2013, 7:43 pm**

that EF looks sick! 8-)

Posted: **August 9th, 2013, 8:27 pm**

**** the wheels, I wanna know more about the gt42 in the engine bay lol

Posted: **August 12th, 2014, 6:12 pm**

Been a while but has anyone since seen anymore photos of the white ef? I 10"s and 12"s to go on my falcon and have been looking high and low for more pics.

+

Posted: **August 12th, 2014, 6:44 pm**

There's been a few pic's pop up on FB when it was up for sale recently (has been converted to carby V8 since then, a mate of mine bought the motor and turbo setup it had previously for his EL)

Posted: **August 12th, 2014, 9:07 pm**

^ those rims look neat as...

Posted: **August 13th, 2014, 2:47 am**

Gay.

The gayest part is he had to pump his gaurds that much his panel gaps are up to shit.

Gayer then a bag full of dicks.

Posted: **August 13th, 2014, 5:26 am**

Ive gotta agree with josh on this one.

Posted: **August 13th, 2014, 10:08 am**

Negative - EF is mint!

Posted: **August 13th, 2014, 2:41 pm**

Yeah it's always looked rough check out the front bar in the pics further up the page (bonnet up) Wtf is with those rear guards, they look ridiculous now. More then just pumped they look cut and extended or something :blink:

Posted: **August 13th, 2014, 3:47 pm**

Here's my efforts as of 5min ago. 295/30/18s will have to play with guards a bit more

If that didn't work
http://s1324.photobucket.com/user/Dumps ... c.jpg.html

Posted: **August 13th, 2014, 3:49 pm**

that looks mint Dumpsta

Are they 10's or 12's?

Posted: **August 13th, 2014, 4:00 pm**

12s mate

Posted: **August 13th, 2014, 8:29 pm**

Fuckin Mint.

This was on FB a little while ago, I bloody love it. Does need the front guards pumped a little though, and a slight adjustment to the ride height.

Posted: **August 13th, 2014, 9:07 pm**

That boxcar looks mad!

Spotted this on FB the other day too. It's fcking sad when I find e-series related shit on FB before forums lol

And another EF my mate got some pic's of when he was over in Australia a while back. Not overdone, just looks mint IMO!

Posted: **August 13th, 2014, 9:24 pm**

The red ef *** is as far as id go!

Posted: **August 14th, 2014, 9:07 am**

kwikxr wrote:And another EF my mate got some pic's of when he was over in Australia a while back. Not overdone, just looks mint IMO!

That is perfect. A falcon should never go any further than that.

Posted: **August 14th, 2014, 3:00 pm**

Posted: **August 14th, 2014, 6:39 pm**

Mattresses = artificial lowering = cheating. Almost as bad as losing a race because you had towels in the boot.

That red EF/L (whatever the **** it is) looks awesome too - really like those wheels.

Loving it all in this thread actually

Now someone pay an exorbitant amount of money for Glorias EL GT wheels so we can get some sick fitment happening!!!

Posted: **August 14th, 2014, 7:20 pm**

Can't tell if serious lol.

Posted: **August 14th, 2014, 8:36 pm**

Which bit? Matresses, the fact I like the burgnundy thingo, or that we want to sell the GT rims and get 'fully sick fitment rimz'?

:grin:

Posted: **August 14th, 2014, 8:41 pm**

The mattresses haha.

Posted: **August 14th, 2014, 8:54 pm**

These fitments are for ricers, come on, its doesnt look right

Posted: **August 14th, 2014, 9:30 pm**

Posted: **August 14th, 2014, 10:58 pm**

robby1 wrote:These fitments are for ricers, come on, its doesnt look right

ricers? uh mate "fitment" is a bit better than that lol...

Falcon scene is getting with the times, some people need to just appreciate that and remember, it isn't your car so it doesn't matter LOL

Posted: **August 15th, 2014, 8:37 am**

Starting to think maybe i should have gotten the P45R's

oh well... modenas should sit alright

Posted: **August 15th, 2014, 11:15 am**

Can always get new outers

more width and lip. Or are yours the 2pc ones?

Posted: **August 16th, 2014, 10:13 pm**

Sorry mate, no offence meant, some 'small' fitment looks ok but the ridiculous fad of huge angles on a street car is pathetic. Regardless of car. It looks stupid

Posted: **August 16th, 2014, 10:24 pm**

robby1 wrote:Sorry mate, no offence meant, some 'small' fitment looks ok but the ridiculous fad of huge angles on a street car is pathetic. Regardless of car. It looks stupid

None taken mate, and each to their own I guess, but I do agree that ridiculous amounts of angle look stupid.

Posted: **August 17th, 2014, 5:32 pm**

Dumpsta wrote:The mattresses haha.

You musn't have gotten the towels reference :p

Posted: **August 17th, 2014, 9:01 pm**

I thought I did but wasn't sure... :drinks2:

cars don't belong in storage. :cry:

Posted: **September 23rd, 2014, 4:57 pm**

I'm surprised that the NC Fairlane will only just fit 10s on the rear. I would have thought there'd be room to spare.
My little Toyota Sprinter had 10's, back in the day... they kinda fit

67rce wrote:18x8.5 -4 and 18x10 -4

Boosted Falcon

E series with fitment

E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment

Re: E series with fitment