Boosted Falcon

Ok guys I have a eb 4l with a t5 manual and I want to put the manual in an auto el which is an ex cop car, just wondering if the pedal box and everything else will fit in the el, also the ecu just has to be tricked to work, to start and idle fine and also thermo fans to work?

If someone has done this before and made a post about ill love if someone could put up a link of that please.

Search is your friend!

Pedal box won't work as the eb one has the provision for the hand brake. Also different brake light switch.
Ecu should run a j3 instead of tricking it. Makes it run better.
Buy a pedal pin and a j3 and you'll be fine. Also gear boots are obviously different.


Cheers

I modified an EB/ED pedal box to suit EF/EL.
Involved some cutting (removing hand brake mount) and a little bit of welding (adding mount for main power plugs).

I preferred to do it this way rather than use a pedal pin as I was able to use the factory clutch switch from the donor car.

All I do is buy a 16×75mm bolt two nuts and three washers theres the pedal sorted for 5$ and 5 minutes.

So should i just sell me eb manual and buy a conversion kit for an el, because would an el auto box and brake pedal fit in a eb?

i used a eb pedal box in my ef all i did was re cut the bolt holes for the steering wheel remove the hand brake bracket and that was it i think easy as if u have a tape measure and a grinder