Page 1 of 1
taking vacum line of fuel reg

Posted:
March 3rd, 2008, 8:35 pm
by fordnuts90
hey guys its been a while since i've been here.....just a quick question...will taking the vacum line of the reg give me more fuel pressure??....or wat will happen or it wont work at all??.......cos i have put a diff cam in with no chip or anything it seems to be running smooth and everything...i just dont wanna lean the AFR'S out to much.......And also wat type of fuel regs are there...are the ones for just N/A setups?? and diff ones for boosted engines??..any help appreciated...thanks
Re: taking vacum line of fuel reg

Posted:
March 3rd, 2008, 8:49 pm
by Damo
it will give you a vacuum leak..
Re: taking vacum line of fuel reg

Posted:
March 3rd, 2008, 9:01 pm
by fordnuts90
Damo wrote:it will give you a vacuum leak..
yes but plug the vacum line up of course...
Re: taking vacum line of fuel reg

Posted:
March 3rd, 2008, 9:09 pm
by 67rce
BAHAHAHAHAHAHAHAHAHAHAHAHAHAHA, a cam alone will not lean out the stock AFR's enough to even worry about pulling the VACUUM hose off to give more fuel pressure
Re: taking vacum line of fuel reg

Posted:
March 3rd, 2008, 9:15 pm
by fordnuts90
67rce wrote:BAHAHAHAHAHAHAHAHAHAHAHAHAHAHA, a cam alone will not lean out the stock AFR's enough to even worry about pulling the VACUUM hose off to give more fuel pressure
ok thanks...its a crow 222549...its not huge but its pretty big..so u dont think it will?
Re: taking vacum line of fuel reg

Posted:
March 3rd, 2008, 9:23 pm
by 67rce
nope, stock they are uber-rich, hell Bi6TIM ran 8psi on stock everything and only just had minor lean points
Re: taking vacum line of fuel reg

Posted:
March 3rd, 2008, 9:50 pm
by CMYWPN
.