E-series barra
Posted: October 1st, 2017, 3:22 pmwhat would be the best way to get are barra in to xh loungrech with t5 trany
Boosted Falcon
http://www.boostedfalcon.net/
E-series barra
http://www.boostedfalcon.net/viewtopic.php?f=2&t=31006
Page 1 of 1
Posted: October 1st, 2017, 3:22 pmRe: E-series barra
Posted: January 29th, 2018, 1:22 pmNotch the front of the sump to clear the K-Frame... get a AU T5 bellhousing.. Drill a hole in the side of the sump for clutch cable to go through to the bellhousing.. Attach the gearbox... open bonnet and lift engine in with a Crane... do up a few bolts.. install radiator and hoses and fill with coolant. fill up engine and gearbox with correct oils.. connect a couple wires and turnkey and enjoy..
Re: E-series barra
Posted: February 2nd, 2018, 3:53 pmThis last bit might be a touch more involved
"connect a couple wires and turnkey and enjoy.."
"connect a couple wires and turnkey and enjoy.."
Re: E-series barra
Posted: February 2nd, 2018, 4:59 pmTry Everything Barra, looms and flash tunes.
They can probably help you.
Cheers Brian.
They can probably help you.
Cheers Brian.