Boosted Falcon

ok, so my stage 2 snort kit is on the way
i'm looking at some intercooler piping kits on ebay, and wondering what i'll need in the kit.. in the way of elbows, joiners, etc..
oh, it will be plumbed up to a ED log manifould..
cheers,

You'll need to answer a few questions for yourself first.

1. Where is the piping going to go through the engine bay on the exhaust side?
2. Does the car have ABS? If so you'll have to go around it with the piping on the intake side.
3. How many bends am I happy to have? and how many silicone joiners am I happy to use?
With my cooler piping I wanted to have the least amount of bends as possible and the least amount of silicone joiners as possible so both of my cooler pipes are one piece with one joiner on the turbo, one joiner either side of the cooler and one joiner on the throttle body.
4. What size cooler? What size piping? Where's the BOV going?

Hope that helps to give you some idea of what you might need.

Tim's right, use as few joins as possible. I personally used an extra two joins in mine unlike Tim though, near the ABS unit so that the piping was easily removable without having to use a hoist, otherwise it would I would have had to cut it to get it off (ie. in the event of getting a defect etc). Those points though are just another place for a hose to let go and lose boost pressure, and it happened a few times. It's a pain in the ass that's avoidable.

He's in VIC Tim... he won't be installing a BOV.

thanks for the replys guys,

1, the piping is going to go through the engine bay about here:

(not my car)

2, yes the car has ABS.

3, as less as possable of both.

4, cooler is 600x300x76, planning on 3" piping, not sure what i was going to with the BOV, do I NEED to have one?

I aslo have a hoist..

bump!!

You NEED to not have BOV.

Steady the MARTYR! wrote:You NEED to not have BOV.

Correct, the man has a Sprint and a Tornado, he's pretty much always going to be right.

oh, one other thing.. Will i requre a catch can??
for now i'll be running 8-9psi with standard ecu..

it wont hurt to run a catch can