Boosted Falcon

hey guys need a new plate idea for my new project (project svo 5 litre)

im reshelling my eb ghia and putting all the good bits into a clean ea.

when i get it registerd im going to invest in personalised plates, never had them before so i figured its the cool thing to do. any one here good at thinking up names or ideas? im really bad at it.

going to be a ea svo (mock), tough na 5 litre, burnout car mainly bit of drag, and good stereo.

and ideas be great.

all i have come up with are:

ea v8
svo 5.0
ea5ltr
lumpe8
whypsi
ybuya4

YBADIK ???
I8COK???

LYTMUP (Light'em Up)

I suck at plate ideas, I'm still trying to think of some for the Sprint.
If someone posts a good idea in this thread, I'll probably steal it off you

WHYPSI is good.
I cant steal that one cause I will have PSI

You realize you will have to have it engineered as the EA's didn't have a V8 option. Might be better off with an EB.

neg,

id swap, most likely using the id from my eb on it. or off a different eb/ed

or i will look at engineer, wich ever is cheaper at the time

Steady the MARTYR! wrote:I suck at plate ideas, I'm still trying to think of some for the Sprint.
If someone posts a good idea in this thread, I'll probably steal it off you

WHYPSI is good.
I cant steal that one cause I will have PSI

thanks mate, yeah girl friend came up with yboost

and yeah i liked that

you need like srpint n vortech or something

blown sprint or something like that would be great

hehe go for it mate, first one to rta wins haha

It'd be pretty piss easy to engineer, brakes are identical to EB-ED 5Ls, you'd be using 5L K Frame.
Engineer might not like modded 5L but.

Jared, just get V8PSI/EDPSI/XRPSI or somethin, Daves plates suited yours

Steady the MARTYR! wrote:It'd be pretty piss easy to engineer, brakes are identical to EB-ED 5Ls, you'd be using 5L K Frame.
Engineer might not like modded 5L but.

yeah thats the thing,

everything from the eb is coming out practiclly

so yeah using the v8 k frame and mounts, not sure if i have to change the steering rack.

i really want a gt steering rack a guy was selling one few weeks ago not sure if its gone.

my mechanic said engineers should be pretty easy but i.d swap is also easy aswell, 1 number and 2 tags.

NOT6CL
EA5LTR
EA302
ANGREA (ANGRY EA)
MADEA?? HAHA
EASVO8
JIM302
LUMPEA
TRYAGN
FRY302

IWASA6

WTF, the VPlates site has changed, and they've limited the amount of times you can try different plates
Good thing you can check general issue plates now though.

stevo wrote:NOT6CL
EA5LTR
EA302
ANGREA (ANGRY EA)
MADEA?? HAHA
EASVO8
JIM302
LUMPEA
TRYAGN
FRY302

haha your good at this mate

i love madea haha

and try again so far

pHaT`eL wrote:Jared, just get V8PSI/EDPSI/XRPSI or somethin, Daves plates suited yours

Agreed I remember seeing a pic of Jareds car with those plates (they might have been in the window I can't remember) and they suited the ED well!

SVO5LT (SVO 5 Litre)

REBRTH

NO.ID.EA

UNLEGT

NOPLTS

SPOOLD

LOKKED

I like LYTMUP.

So I bought them.

Nawt.

Rebirth idea is shithouse. Don't worry about engineer's certificate till you get busted. Even then cops and RW tester will suck a55 at knowing whether it's an EA or EB or whatever more than likely, or wont have the information to identify the year / model 5L V8 was brought in to production..

In other words..

GGFENG (Go Get FUkked Engineers)

[GGF-EPA]

Sundeep wrote:[GGF-EPA]

hahaha thats mint mate nice one

yeh not worried about engineers, easy part of the job

i might need your help with wiring sunny, you seem to know a ton.

if ya dont mind, ill give ya first skids when its running.

hopefully by then it will have the 3k stall and 3.9 rear end :0

[DEAD-PUPPIES]

It might have to be a European style plate.

[SUX-CSH]
[BYO-PSI]/[BYO-N2O]
[IGASIT]
[INDNYL]
[LATR2U] <--my old plates if any1 wants to buy $1200 haha
[EAMISL] coz missiles detroy jets e.g [JETBT1]
[EATRYC]
[FKNVLZ]
[USAARK]
[LOLAT6]

ebgt302 wrote:

Sundeep wrote:[GGF-EPA]

hahaha thats mint mate nice one

yeh not worried about engineers, easy part of the job

i might need your help with wiring sunny, you seem to know a ton.

if ya dont mind, ill give ya first skids when its running.

hopefully by then it will have the 3k stall and 3.9 rear end :0

I don't know fuk all about wiring rly. All I suggest is you completely switch the looms over. You wont have to touch any wires in the sense of cut and shut - just jam it all in and plug & play it.

yeh im going to pull all the wring from the eb, well most of it any way.

agreed regarding the engineers... i got V8 in my EA wagon, which looks like an EL.
i'd probably give a thumbs up to the cops if they pick it

yeah, im gonna have eb rear garnish and i want to try n get a svo badge so i doubt they will pick it.

Isn't the SVO gear all going to be taken off of it?

like?

dosent have the front badge.

has side barges and rear badge im keeping.

what els is svo on it?

cluster is sold, i dont want the interior i prefer my seats and i evuntly want some eb fairmont series 2 door trims and rear seat so my el ghia trims will be for sale soon.

EFFalcon wrote:agreed regarding the engineers... i got V8 in my EA wagon, which looks like an EL.
i'd probably give a thumbs up to the cops if they pick it

So its not registered as a V8?

nah

i dont think the cops will be interested in under the bonnet. they will be to confused with the rear end

WHEEZA
WHEE2A
WHEEZ4

SLOSVO
LOWSVO
TUFSVO
EBSVO8

CANSKD

You get fined for wanker numberplates these days remember

http://www.youtube.com/watch?v=YGyH8Kf_ ... re=related

Frost wrote:You get fined for wanker numberplates these days remember

http://www.youtube.com/watch?v=YGyH8Kf_ ... re=related

hahaha nice 1 mate

thanks mint! hahaha

unfortunatly theres too many wankers and not enuff inspectors......

my mate just got for his stock VT berlina "lowhsv"

Frost wrote:my mate just got for his stock VT berlina "lowhsv"

He should have got "HOMO"