Boosted Falcon

Hey everyone we are just about introduce a new air intake system for those that would like to get rid of there state of the art ford air box. IF people can remember my original airbox it is a offshoot of that . THis is due to be finished in the couple of weeks.

See below pics of some of the testing we have been doing in some of the cars.
THese two pics below are the first Prototype




The ones below is the final Moulding of the air box. Not there is area for both the EA-ED side induction as well as a EF EL top induction for the BBM. Note these will also accommodate the v8 models as well .







As well as this we have made airboxes for all BA 3v xr6t XR8 see below
V8

XR6t



AU xr6 and xr8 have also been done see below .
PICS will be put up soon


WE also have availales straight away . AU Guage pods and BA Gauge pods








As this is a joint venture between myself and BRI BRI do not hesitate to ask a question

looks good, is it possible to see how they look for the EF/EL V8s

Pricing for Air boxes will be posted at a later date.

Gauge pods prices are available as a special to forum members
they will be placed up soon as price recently gone up

As i said we have just in the moulding of this . We will have to test fit in one . Not many of the ef -el 5 litres around my area tio borrow to test fit yet.



ALso for those who have seen my bottom part of my brock the pods will come out soon .

Ok guys if you want to contact me dont hesitate if u have any questions

Ok guys if you want to contact me dont hesitate if u have any questions

They look great!

I've got a question:

EA-ED dashes, the bit that has the vents, trip computer, demist button, etc... There's that weird useless cavity there. Would you be able to fab up some kind of mould/surround for that so that a single gauge could slot into there?

i will also be interested in the ef,el v8 ones.

whats it made out of? couple of mm thick ply with fibreglass resin then covered with bog for painting? looks good

Commando wrote:They look great!

I've got a question:

EA-ED dashes, the bit that has the vents, trip computer, demist button, etc... There's that weird useless cavity there. Would you be able to fab up some kind of mould/surround for that so that a single gauge could slot into there?

That would be awsome.....

Commando wrote:They look great!

I've got a question:

EA-ED dashes, the bit that has the vents, trip computer, demist button, etc... There's that weird useless cavity there. Would you be able to fab up some kind of mould/surround for that so that a single gauge could slot into there?

Well ill see what i can do but there is alot of man hours in that work. We are making the bottom ones first thing
to be done

speed.freak wrote:whats it made out of? couple of mm thick ply with fibreglass resin then covered with bog for painting? looks good

They are fibreglass resin moulded . there is no bog or painting

^that is a good idea
who exactly is selling these? you or a company?
do you simply just cut where you would like a hole or do they come with holes for specific models? (eb/ed-ef/el)

Id defintely be down for one of those airboxes for my car

Hi guys Im the silly bastard that makes them, The air box is vac formed over a wood and plastic filler pattern which is a proto type. This pattern is used until the object or in this case the air box is to a stage were Im happy with it, Then I can go ahead and get an aluminum die made which brings the dollars into the equation. The air box is made from ABS plastic which is very durable, resists cracking and will take temp around 100 C, the plastic is 4.5 mm thick. Later on I will make on request clear air boxes with a blue neon light inside for who want to show the boys under there bonnet at knight. These air boxes are made in conjunction with my work Acron Plastics.
Thanks for your interest.
Bri Bri.

Any prices on the el 6 box yet?

are the ba gauges based on the typhoon ones? some of the pods don't point directly to the driver.
cheers

looks good and interesing. I might look at getting one in the future. How is all the testing going with them ?

id be keen to try an ef 6cyl one.

The guages do face the driver very well.
The airboxes are still available for Ba and the E series ones have been up for sale for a fair long time .
I have one in my ef and i have started to see alot more car getting them.

Here is a pic at the last cruise

These are available on ebay or i can get them directly to you .

looks good... how much for 1 to be deliverd to melbourne northen suburbs?

If a few people put in orders they should be able to do it for under the 200 i reckon . I can organise delivery or pick up as im always in that area
They will work for all e series 6 and 8's
Pm me and ill organise it

Do they make a difference at all???

Also do they fit a panel filter of a pod filter???

So there isent a hole for the snorkel???

whats the ebay link???

pod filter .mate .
And you dont need any snorkel because u getting a heap of air behind ur lights.

Here is a link to the ba ones

http://cgi.ebay.com.au/BA-BF-FORD-FALCO ... 911.c0.m14

pod filter .mate .
And you dont need any snorkel because u getting a heap of air behind ur lights.

Here is a link to the ba ones

http://cgi.ebay.com.au/BA-BF-FORD-FALCO ... 911.c0.m14

pod filter .mate .
And you dont need any snorkel because u getting a heap of air behind ur lights.

Here is a link to the ba ones

http://cgi.ebay.com.au/BA-BF-FORD-FALCO ... 911.c0.m14

can you feel much of a difference

If its going to give anythign of a performance increase from the big mouth intakes on ebay then i recon for under 200 is a good price

I reckon it did in both my ea and ef .
It also was fuel efficent in the ba's

so where do we buy the e-series ones? got a link?

Would it be worth wild if u also done a snorkel in conjunction with this airbox for E series, reason i say this as a few people have lpg and becuz of some lpg system designs they restrict air so getting as much through the airbox and a snorkel would be awsome.

Also there are a few big engine V8 E series builds on ford forums which would like this airbox and these guys are cutting there airboxes up and so on so maybe u should post this there and also look into a snorkel as these engines need as much air as possible.

Another idea would be to dyno these especially the Ba onwards stuff as u have a few competitors and show what sort of difference gains in ur product to get some product confidence with ur gear.

mickyyyy wrote:Would it be worth wild if u also done a snorkel in conjunction with this airbox for E series, reason i say this as a few people have lpg and becuz of some lpg system designs they restrict air so getting as much through the airbox and a snorkel would be awsome.

Also there are a few big engine V8 E series builds on ford forums which would like this airbox and these guys are cutting there airboxes up and so on so maybe u should post this there and also look into a snorkel as these engines need as much air as possible.

Another idea would be to dyno these especially the Ba onwards stuff as u have a few competitors and show what sort of difference gains in ur product to get some product confidence with ur gear.

MAte you get more air from behind the light then you do with a standard air box and a snorkel . It covers a big area and works well, There has been over 2 years of research and tryong to get these running perfect. This unit will not be changing from what it is.
I had a unit on my car for almost 2 years b4 going to throttle bodies on the ea.

Mate two big e series v8 builds on ford forums already have these or ones that were made simialr.


There has been over 120 sold of the Ba ones on ford forums ford mods and xr6turbo website mate.
There is enough good feedback for them not to btoher about trying to do dyno runs with and with out.


Thanks
Scott

the e series one will not be selling on the ebay link because they have only done a limited run.
Ill be selling them on here for them.

on the ebay link it takes you to the online shop, but theres no price..
does the 200 you said before cover the box, piping and pod.
i'd only need the box and piping.??

They are from that ebay store.
and there are prices all over it mate.
There just isnt a e series one on there

Only covers the box mate .
Ill put up prices with and with out stuff .
Im going there tonight to sort all of it out .

Tommorow ill have a full set price list of everything

so like, make a big one to cover superchargers

some how dont think so

Will any of them fit an EA, EB , ED but be able to have the piping for the EF, EL? Just for the guys using a BBM in the earlier model E series....