GOOD panel beaters in Brisbane....price is no concern...

This is a general discussion forum, open to all participants

GOOD panel beaters in Brisbane....price is no concern...

Postby Rollin » February 9th, 2009, 10:26 pm

Sup.

A few weeks ago I was driving home after going for a ride, turned sharp left at a green arrow and had to stop immediately as a TRD Aurion was stopped perpendicular to both lanes, waiting to make an illegal right turn. I stopped, the Subaru Outback behind me didn't, resulting in a slight hit in the ass.

I need two written quotes before I can get it fixed by the other guys insurance company. I took it to the guys that fixed my door after the epic fail at PC a couple of years ago and they wouldn't quote without me guaranteeing they would get the job - wtf.

Anyone know GOOD repairers that will quote with a 50/50 chance of getting the job? Price no object obviously, I'm not paying :D

Obligatory pics of Subaru fail - thank F*ck the garnish is still ok!

Image

Image
Image

Look at your car. Now back to mine. Now back to yours. Now back to mine. Sadly, yours isn't mine. But if you stopped buying dodgy cars and bought an ED, yours could be like mine. Look down. Back up. Where are you? ...You're on BoostedFalcon, reading the signature your signature could be like! Anything is possible when your car looks like my car... I'm on a computer.
User avatar
Rollin
Melting Pistons
 
Posts: 7933
Joined: July 15th, 2007, 4:35 pm
Location: Brisbane - Driving around in a metal and glass case of emotion!
Has Liked: 327 times
Been Liked: 751 times

1994 Ford Falcon

Re: GOOD panel beaters in Brisbane....price is no concern...

Postby rab » February 9th, 2009, 10:44 pm

what a twat eh ? ... my mate is a painter of 20yrs and mitsi service manager.... he could paint it for cash but he snt employed in the trade anymore so couldnt quote it i dont think but ask if he recommends anyone also...
WHOLESALEBLINDCOMPANY.COM.AU
110 Morayfield Rd, Morayfield, next to John Page Nissan.
0415-814-134
BLINDS/SHUTTERS/AWNINGS
User avatar
rab
Cruising
 
Posts: 496
Joined: January 9th, 2009, 1:58 pm
Location: CALOUNDRA, Queensland
Has Liked: 0 time
Been Liked: 4 times

Re: GOOD panel beaters in Brisbane....price is no concern...

Postby 67rce » February 9th, 2009, 10:47 pm

Dan, There is a place just down the road from my work, they do Awesome work, i'll grab the name of em (I think it is Bursons or something like that), they currently have an XY GT Replica and a HT GTS in there, or Logan Village Smash Repairs, Ask for Rob Haiken, he does all the local Supercar teams panelwork, old school guy, hammer and dolly, will make a panel rather than buy one
Cammed Suzuki Baleno, Haltech PS1000, E85
User avatar
67rce
Breaking Intake Welds
 
Posts: 4073
Joined: October 27th, 2007, 3:39 pm
Location: Brisbane
Has Liked: 170 times
Been Liked: 100 times

Re: GOOD panel beaters in Brisbane....price is no concern...

Postby 93edxr6 » February 9th, 2009, 10:54 pm

was it u that got hit by a hilux ? or was the oed?
Why do toasters always have a setting that burns the toast to a horrible crisp, which no decent human being would eat?
User avatar
93edxr6
Spooling Up
 
Posts: 864
Joined: November 9th, 2007, 11:43 pm
Has Liked: 14 times
Been Liked: 2 times

Re: GOOD panel beaters in Brisbane....price is no concern...

Postby 67rce » February 9th, 2009, 10:56 pm

OED got Hilux'ed and Rolled went to the Outback :lol:
Cammed Suzuki Baleno, Haltech PS1000, E85
User avatar
67rce
Breaking Intake Welds
 
Posts: 4073
Joined: October 27th, 2007, 3:39 pm
Location: Brisbane
Has Liked: 170 times
Been Liked: 100 times

Re: GOOD panel beaters in Brisbane....price is no concern...

Postby 93edxr6 » February 9th, 2009, 11:02 pm

hahah funny answers are 10 times better
Why do toasters always have a setting that burns the toast to a horrible crisp, which no decent human being would eat?
User avatar
93edxr6
Spooling Up
 
Posts: 864
Joined: November 9th, 2007, 11:43 pm
Has Liked: 14 times
Been Liked: 2 times

Re: GOOD panel beaters in Brisbane....price is no concern...

Postby Malakai » February 9th, 2009, 11:25 pm

LOL at the other cars number plate imprint on your bumper.
FG G6E Turbo MkII - Nizpro Stage 3 - 364 rwkW - 11.63 sec @ 118 mp/h | I like the dark, I love the dark, but I hate nature. Image
User avatar
Malakai
Double Clutching
 
Posts: 5251
Joined: July 21st, 2007, 1:23 pm
Location: Brisbane
Has Liked: 0 time
Been Liked: 32 times

Re: GOOD panel beaters in Brisbane....price is no concern...

Postby Bipolar » February 10th, 2009, 12:00 am

R&A Body Works in Alderley - 33556574. We use them for our work cars which have to be perfect or we have to pay to get them redone when we return them after their leases expire. I got my new bumper done there too. Nice bunch of blokes.
Image
RBKILA wrote:yes im sure 99% of the hate is just jealousy from morons.
the same sort of people you see at bathurst, wearing all the hrt gear and then you see them get into a camry in the car park lol
User avatar
Bipolar
Moderator
Moderator
 
Posts: 4493
Joined: July 24th, 2007, 6:49 pm
Has Liked: 741 times
Been Liked: 225 times

1997 Ford Falcon

Re: GOOD panel beaters in Brisbane....price is no concern...

Postby Gozza » February 10th, 2009, 8:31 am

Todd is that off one of the street where the pickering street round about used to be? i went to a place there and they backed my shit into a pole and denied it.
Its a stack of f*ck shit, on top of itself niggaaaaaa
User avatar
Gozza
Hitting N2O
 
Posts: 3609
Joined: August 10th, 2007, 11:31 am
Location: Brisbane
Has Liked: 1 time
Been Liked: 3 times

1992 Ford Falcon

Re: GOOD panel beaters in Brisbane....price is no concern...

Postby get_an_ea_today » February 10th, 2009, 1:03 pm

Some guy reversed into me about a month ago, $1,110 later which he paid for thank god haha. Im just glad he didnt hit my garnish either

Image
Image
'07 BF Fairlane Ghia - ZF 6 Speed Auto, Silhouette, Black Leather Interior

Mods - Plazmaman CAI, Octane Tint, Plazmaman Billet Oil Cap, K&N 3" Pod Filter, 20" Koya Rex Rims

Audio - Kenwood KDC-U6049 Headunit, 6" KS6.2 Kicker 75wrms Components, 6" KS60 Kicker 65wrms, 2 x 12" CompVR Kicker Subwoofers 800wrms, Option Audio OAK75 4 way 75wrms Amp, Option Audio OAX2000 Monoblock 2000wrms Amp
User avatar
get_an_ea_today
Breaking Traction
 
Posts: 1322
Joined: July 17th, 2007, 8:34 am
Location: Sunshine Coast, QLD
Has Liked: 139 times
Been Liked: 20 times

Re: GOOD panel beaters in Brisbane....price is no concern...

Postby Bipolar » February 10th, 2009, 1:21 pm

Gozza wrote:Todd is that off one of the street where the pickering street round about used to be? i went to a place there and they backed my shit into a pole and denied it.

That could be them. There's a few around there. One of their pleb guys that doesn't actually work on the cars doesn't seem overly worldy, but I wouldn't have thought he'd be simple enough to do something like that.
Image
RBKILA wrote:yes im sure 99% of the hate is just jealousy from morons.
the same sort of people you see at bathurst, wearing all the hrt gear and then you see them get into a camry in the car park lol
User avatar
Bipolar
Moderator
Moderator
 
Posts: 4493
Joined: July 24th, 2007, 6:49 pm
Has Liked: 741 times
Been Liked: 225 times

1997 Ford Falcon

Re: GOOD panel beaters in Brisbane....price is no concern...

Postby Gozza » February 10th, 2009, 1:39 pm

i have a feeling thats them but i can't be sure. Id have to drive past and point it out
Its a stack of f*ck shit, on top of itself niggaaaaaa
User avatar
Gozza
Hitting N2O
 
Posts: 3609
Joined: August 10th, 2007, 11:31 am
Location: Brisbane
Has Liked: 1 time
Been Liked: 3 times

1992 Ford Falcon

Re: GOOD panel beaters in Brisbane....price is no concern...

Postby Ef_frmnt » February 10th, 2009, 8:07 pm

matts performance paint and panel in paisley drive right near browns engineering
XD Falcon 427ci - long term drag (in-and-out-of-shed) car project
1992 Ford Courier LS1, big cam, big stall, big nitrous, and soon to be packing a big turbo..
PX MKii Wildtrak 20" Monster wheels with 33x10 tyres, Fox Shocks, custom stereo install, ARB Summit rear bar
User avatar
Ef_frmnt
Full Boost
 
Posts: 2069
Joined: July 24th, 2007, 7:50 pm
Has Liked: 157 times
Been Liked: 257 times

Re: GOOD panel beaters in Brisbane....price is no concern...

Postby Revengelane » February 11th, 2009, 11:24 pm

Dan, give Kassulke's Smash Repairs a call on 3353 3133 located at Everton Hills. They do fantastic work and we have had 2 cars repaired there. They mainly do insurance jobs so the level needs to be high.
U MAD BRO
Revengelane
Spooling Up
 
Posts: 689
Joined: August 3rd, 2007, 6:29 pm
Has Liked: 3 times
Been Liked: 10 times


Return to General Discussion

Who is online

Users browsing this forum: No registered users