not really an E but close enuff

Introduce yourself and your ride.

not really an E but close enuff

Postby elitexr » March 5th, 2010, 2:23 pm

hay all ,was refered to this forum as i am currently building a motor with a snort kit and were told this is the place for tips and insight on the build so thought i might join even tho its an AU , hope uz like the pics
let me no what you think :grin:


daily just tinkering with it till i get board


Exterior;

star corp impul wheels
ba xr brake conversion
t series kit
boss bonnet
rear lights
neons in door handles and under car
had super low spring but because of boot install weight now has factorys again bogue shortend shocks
kings in front
full series 3 suspension and components with noltec bushes all round


Interior;

custom gauge pod
custom screen air bag pod
wheel
custom roof lining
recaros
neons inside
all plastic painted
10 inch screen in rear
jvc dvd player
2 4 ch amps under seats
cstom parcel shelf with 4'' and 6x9s
custom door pods bi amped polk momo splits and momo coax
custom rear door pods wit ss tarantula splits
sparco shifter / boot
console trim

boot;
D31 optima
pca 2000d monoblock snd stream
4x van goh snd stream subs
pg 4 ch
2x earth quake caps 2 x 16 inch screens
1x 7 inch screen
2x 4 inch polks
custom boot lid
custom box
custom interchangable floors 1 with x box and 1 with 10lb nos bottle
custom amp racks
heaps of neons
about 1 km of wiring lol
but heaps of shit i cant remember

still going with it
all work was done by myself except the painting

pics:
Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image]

Image

Image

Image
cash cab aint got s@%t
User avatar
elitexr
Idling
 
Posts: 93
Joined: March 4th, 2010, 4:38 pm
Location: canberra

Postby EFFalcon » March 5th, 2010, 2:25 pm

I think we need to make new banners.

Nice car mate, fair bit of work has gone into that setup.

will look fantastic with a front mount behind that front bar.
User avatar
EFFalcon
Site Admin
Site Admin
 
Posts: 8510
Joined: June 4th, 2007, 8:26 pm
Location: Mornington Peninsula

1995 Ford Falcon

Re: not really an E but close enuff

Postby Neilo77 » March 5th, 2010, 2:32 pm

Very nice ride you have there 8-)
Neilo77
Idling
 
Posts: 38
Joined: February 21st, 2010, 7:20 pm
Location: Geelong, Victoria

Re: not really an E but close enuff

Postby elitexr » March 5th, 2010, 2:42 pm

yeah got a pwr 600x300 for it should be about a month awy from turn key for the new motor,
was told i need to fit a ba/bf xr6 turbo map sensor has any one done this mod yet ?
cash cab aint got s@%t
User avatar
elitexr
Idling
 
Posts: 93
Joined: March 4th, 2010, 4:38 pm
Location: canberra

Re: not really an E but close enuff

Postby krisisdog » March 5th, 2010, 3:28 pm

Only thing I'm not keen on is the underbody neons. Everything else is fkn awesome!
User avatar
krisisdog
Hitting N2O
 
Posts: 3055
Joined: August 1st, 2007, 10:03 pm
Location: Grafton

1995 Ford Falcon

Re: not really an E but close enuff

Postby rhys375 » March 5th, 2010, 3:36 pm

wow dude that is fuckin insane. im guessing you disconnected the passenger side airbag? Also youve got the front bar that I want :drinks2:
AU Falcon

Pod - Ph4480's - Hooker Exhaust - Wade AU1671 - SS Inductions T/B - T5 - J3 Customised Tune - Premium sound - Bollé Tint - Full xr8 interior conversion

143 RWKWs - 320 Nm
User avatar
rhys375
Breaking Traction
 
Posts: 1391
Joined: April 4th, 2008, 7:34 pm
Location: Upper Gully, Vic

1998 Ford Falcon

Re: not really an E but close enuff

Postby pHaT`eL » March 5th, 2010, 3:43 pm

I think Brocky has some competition :P

Awesome ride, LOVE the wheels :)
[EBW-302] 1991 EB GL WAGON V8
[PHAT-EL] 1998 EL FAIRMONT TURBO - SOLD

boostedfalcon MERCHANDISE @ SHAMROCK SHIRTS


BOOSTEDFALCON.NET ALL FORD CRUISE FOR CHARITY - 31/10/2010
User avatar
pHaT`eL
Moderator
Moderator
 
Posts: 5391
Joined: July 16th, 2007, 2:12 pm
Location: Cruise Moderator

1991 Ford Falcon

Re: not really an E but close enuff

Postby elitexr » March 5th, 2010, 3:54 pm

rhys375 wrote:wow dude that is fuckin insane. im guessing you disconnected the passenger side airbag? Also youve got the front bar that I want :drinks2:


its a pov pack S1 xr so it didnt have an air bag but im sure the RTA still wont approve :cry:
cash cab aint got s@%t
User avatar
elitexr
Idling
 
Posts: 93
Joined: March 4th, 2010, 4:38 pm
Location: canberra

Re: not really an E but close enuff

Postby jarryddelany » March 5th, 2010, 6:00 pm

sick car, nice interior
rebuilt ed xr6 tickford engine in a eb
cylinders bored and honed .5mm
high compression pistons
larger exhaust valves
head ported and polished
stage 2 cam
xr6 computer
hi flo red back cat converter
2 1/2 inch exhaust,
k/n pod filter
Pacemaker extractors
Top gun leads




build thread: viewtopic.php?f=3&t=10368
User avatar
jarryddelany
Cruising
 
Posts: 461
Joined: April 15th, 2009, 8:32 pm
Location: wallan

Re: not really an E but close enuff

Postby Rollin » March 5th, 2010, 6:03 pm

Bugger me! You've got some serious skill there!
Image

Look at your car. Now back to mine. Now back to yours. Now back to mine. Sadly, yours isn't mine. But if you stopped buying dodgy cars and bought an ED, yours could be like mine. Look down. Back up. Where are you? ...You're on BoostedFalcon, reading the signature your signature could be like! Anything is possible when your car looks like my car... I'm on a computer.
User avatar
Rollin
Breaking Intake Welds
 
Posts: 4725
Joined: July 15th, 2007, 4:35 pm
Location: Brisbane - hypermiling an NC :D

Re: not really an E but close enuff

Postby vegabass » March 5th, 2010, 7:31 pm

I see this car parked out the back of a certain car sound shop! I cant help but stare at it!


Help with my boost install!
Rollin wrote: You could heat treat and forge the gears in a T5 with the heat and pressure generated between the perfectly formed thighs of Scarlett Johansson scissoring with Jessica Alba, and have them blessed by the Pope, Ghandi, Allah, Buddha and Commando's mum and they'll still be pissy little gears best suited to low HP applications.
User avatar
vegabass
Spooling Up
 
Posts: 797
Joined: September 25th, 2007, 5:01 pm
Location: Canberra ACT

Re: not really an E but close enuff

Postby nstg8a » March 5th, 2010, 8:13 pm

damn, that is awesome, gotta be one of the best au's period.



electric window conversion in the plans?
Image
User avatar
nstg8a
Breaking Traction
 
Posts: 1154
Joined: August 4th, 2008, 1:38 pm
Location: Tingalpa, Brisbane.

Re: not really an E but close enuff

Postby dylby1 » March 5th, 2010, 9:15 pm

fark wish i had that sound system in my car.
dont think ill ever have that much money tho lol

loved how its a daily that ur just tinkering with lol
2003 BA XR6: 18 Inch wheels, Darkest legal tint, 5 Speed Manual
viewtopic.php?f=3&t=16849

Crashed EB Fairmont
viewtopic.php?f=3&t=13494

Image
User avatar
dylby1
Spooling Up
 
Posts: 667
Joined: January 17th, 2010, 2:31 pm
Location: Ouyen, Victoria

Re: not really an E but close enuff

Postby psychotic-angel » March 6th, 2010, 5:46 am

fark me that things low what is ride like?
I drive like a CULLEN
User avatar
psychotic-angel
Spooling Up
 
Posts: 532
Joined: June 15th, 2008, 12:26 am
Location: cootamundra

Re: not really an E but close enuff

Postby elitexr » March 6th, 2010, 7:51 am

psychotic-angel wrote:fark me that things low what is ride like?


it used to ride like shit its been through 2n sets of springs now it rides on the factory springs with lowered shocks because the install is HEAVY as thats why its in the process of getting boosted

snort kit should hopefully turn up this week :good:

Image

Image

Image
cash cab aint got s@%t
User avatar
elitexr
Idling
 
Posts: 93
Joined: March 4th, 2010, 4:38 pm
Location: canberra

Re: not really an E but close enuff

Postby elitexr » March 6th, 2010, 7:56 am

vegabass wrote:I see this car parked out the back of a certain car sound shop! I cant help but stare at it!


Help with my boost install!


hit us up any time
cash cab aint got s@%t
User avatar
elitexr
Idling
 
Posts: 93
Joined: March 4th, 2010, 4:38 pm
Location: canberra

Re: not really an E but close enuff

Postby iceman » March 6th, 2010, 9:08 am

welcome aboard mate ;)

car looks fantastic may have to a special deal for you on our new iceman1200 plenum
iceman
Spooling Up
 
Posts: 648
Joined: December 7th, 2007, 12:11 am

Re: not really an E but close enuff

Postby elitexr » March 6th, 2010, 9:48 am

iceman wrote:welcome aboard mate ;)

car looks fantastic may have to a special deal for you on our new iceman1200 plenum


as u may have guessed this is the car your kits going on luckily its raining here in canberra so the photos have been postponed for a couple of weeks so if all goes to plan the motor will be in the shoot
cash cab aint got s@%t
User avatar
elitexr
Idling
 
Posts: 93
Joined: March 4th, 2010, 4:38 pm
Location: canberra

Re: not really an E but close enuff

Postby Cabeshere » March 8th, 2010, 6:23 pm

Nice. I am liking it very muchly. The nos bottle hooked up or just show?
Cabeshere
Idling
 
Posts: 36
Joined: September 15th, 2009, 5:30 pm
Location: Rockhampton QLD

Re: not really an E but close enuff

Postby Mr_EF_96 » March 8th, 2010, 10:15 pm

Welcome mate.

That thing is insane love it. awsome interior :D
MR_EF_96
Living life one day at a time
Mr_EF_96
Cruising
 
Posts: 260
Joined: February 5th, 2010, 10:42 am
Location: Vic.

Re: not really an E but close enuff

Postby dylby1 » March 8th, 2010, 10:28 pm

ill bet the back of this car isnt even lowered :P
2003 BA XR6: 18 Inch wheels, Darkest legal tint, 5 Speed Manual
viewtopic.php?f=3&t=16849

Crashed EB Fairmont
viewtopic.php?f=3&t=13494

Image
User avatar
dylby1
Spooling Up
 
Posts: 667
Joined: January 17th, 2010, 2:31 pm
Location: Ouyen, Victoria

Re: not really an E but close enuff

Postby BROCKYB8 » March 9th, 2010, 7:49 am

pHaT`eL wrote:I think Brocky has some competition :P

Awesome ride, LOVE the wheels :)



Lol well ive known about this car for some time . The rep from my work has sent me a few pictures of this .
And id say that his would beat mine hands down

Good to see a au getting a decent motor put into it.
Great install too.

Car looks mint.
Welcome . :thumbsup:
www.cveperformance.com
www.autoindulgence.com.au
CARS:
EA Brock B8- 4.11 lsd , CVE custom Cam and head , Wolf v500 , Custom Induction setup , Stock bottom end
207rwkw - 12.89 @ 109.6mph
User avatar
BROCKYB8
Commando
 
Posts: 5230
Joined: July 26th, 2007, 10:29 am

1989 Ford Brock

Re: not really an E but close enuff

Postby BROCKYB8 » March 9th, 2010, 7:55 am

would love to see a build thread of this . CHuck it in the build section
www.cveperformance.com
www.autoindulgence.com.au
CARS:
EA Brock B8- 4.11 lsd , CVE custom Cam and head , Wolf v500 , Custom Induction setup , Stock bottom end
207rwkw - 12.89 @ 109.6mph
User avatar
BROCKYB8
Commando
 
Posts: 5230
Joined: July 26th, 2007, 10:29 am

1989 Ford Brock

Re: not really an E but close enuff

Postby elitexr » March 9th, 2010, 8:14 am

it was hooked up ,yeah its riding on factory springs now after near ripping the rear bar off on speed humps :roll:
cash cab aint got s@%t
User avatar
elitexr
Idling
 
Posts: 93
Joined: March 4th, 2010, 4:38 pm
Location: canberra

Re: not really an E but close enuff

Postby dylby1 » March 9th, 2010, 8:15 am

ouchy. my magna does the opposite. hits the front on barely steep driveways lol
2003 BA XR6: 18 Inch wheels, Darkest legal tint, 5 Speed Manual
viewtopic.php?f=3&t=16849

Crashed EB Fairmont
viewtopic.php?f=3&t=13494

Image
User avatar
dylby1
Spooling Up
 
Posts: 667
Joined: January 17th, 2010, 2:31 pm
Location: Ouyen, Victoria

Re: not really an E but close enuff

Postby elitexr » March 9th, 2010, 8:18 am

BROCKYB8 wrote:
pHaT`eL wrote:I think Brocky has some competition :P

Awesome ride, LOVE the wheels :)



Lol well ive known about this car for some time . The rep from my work has sent me a few pictures of this .
And id say that his would beat mine hands down

Good to see a au getting a decent motor put into it.
Great install too.

Car looks mint.
Welcome . :thumbsup:


thanks mate .witch rep? do u work as a fitter too? ,never really took many build pics unfortunately ill see if ive got some, ive only recently started taking some of the bob tail wing im making and i got some pics ill put up from this weekend when the under body was done for the mag pics
cash cab aint got s@%t
User avatar
elitexr
Idling
 
Posts: 93
Joined: March 4th, 2010, 4:38 pm
Location: canberra

Re: not really an E but close enuff

Postby BROCKYB8 » March 9th, 2010, 9:02 am

Anthony Naughton

And yeah do a right up in the completed section then that would be awesome
www.cveperformance.com
www.autoindulgence.com.au
CARS:
EA Brock B8- 4.11 lsd , CVE custom Cam and head , Wolf v500 , Custom Induction setup , Stock bottom end
207rwkw - 12.89 @ 109.6mph
User avatar
BROCKYB8
Commando
 
Posts: 5230
Joined: July 26th, 2007, 10:29 am

1989 Ford Brock

Re: not really an E but close enuff

Postby elitexr » March 9th, 2010, 10:06 am

BROCKYB8 wrote:Anthony Naughton

And yeah do a right up in the completed section then that would be awesome


witch company?
cash cab aint got s@%t
User avatar
elitexr
Idling
 
Posts: 93
Joined: March 4th, 2010, 4:38 pm
Location: canberra

Re: not really an E but close enuff

Postby BROCKYB8 » March 9th, 2010, 11:12 am

Clarion mate
www.cveperformance.com
www.autoindulgence.com.au
CARS:
EA Brock B8- 4.11 lsd , CVE custom Cam and head , Wolf v500 , Custom Induction setup , Stock bottom end
207rwkw - 12.89 @ 109.6mph
User avatar
BROCKYB8
Commando
 
Posts: 5230
Joined: July 26th, 2007, 10:29 am

1989 Ford Brock

Re: not really an E but close enuff

Postby [Sterling] » March 9th, 2010, 7:46 pm

I hate the fact its in AU, but i love the fact youve made it look AWESOME.

I may be the only 1 here but, T-Series kits always make it look like a V8 supercar.
C63 AMG - 6.3lt V8 - AMG SHIFTSPEED 7 speed auto - black on black - 330kw
User avatar
[Sterling]
Breaking Intake Welds
 
Posts: 4470
Joined: November 27th, 2007, 8:25 pm
Location: Im In Miami Trick!! a.k.a Chirnside park

2003 Ford XR6

Re: not really an E but close enuff

Postby Bipolar » March 9th, 2010, 8:21 pm

Great looking AU. That pic in front of Mount Ainslie is mint.
Image
Commando wrote:Is there such a thing as un-fapping? Because if there is, I'm doing that right now.
User avatar
Bipolar
Hitting N2O
 
Posts: 3373
Joined: July 24th, 2007, 6:49 pm

1997 Ford Falcon

Re: not really an E but close enuff

Postby Adypie » March 9th, 2010, 8:51 pm

holy F U C K K K K!!!!!
Ride: 1994 ED XR6 - Progress
Image
I don't know officer, you're tellin' the story, I'm just turnin' the pages.
User avatar
Adypie
Idling
 
Posts: 82
Joined: February 28th, 2010, 10:46 am
Location: Mackay, QLD

Re: not really an E but close enuff

Postby elitexr » March 10th, 2010, 7:45 am

Bipolar wrote:Great looking AU. That pic in front of Mount Ainslie is mint.


after being rained out on sat finally tonight its having is street fords shoot tonight (touch wood) ,im gonna sway towards doing the pics there again if the concrete thingo hasn't been fixed
cash cab aint got s@%t
User avatar
elitexr
Idling
 
Posts: 93
Joined: March 4th, 2010, 4:38 pm
Location: canberra

Re: not really an E but close enuff

Postby vegabass » March 12th, 2010, 12:35 pm

So can we know a bit more about you like, are you the owner of elite car sound, how long you have been in the business, what your future plans for the car is etc etc

I have been into the shop a few times but for some reason havent bought anything. I think im waiting for the right gear to jump out and make me smile. Like your car makes me smile :grin:
Rollin wrote: You could heat treat and forge the gears in a T5 with the heat and pressure generated between the perfectly formed thighs of Scarlett Johansson scissoring with Jessica Alba, and have them blessed by the Pope, Ghandi, Allah, Buddha and Commando's mum and they'll still be pissy little gears best suited to low HP applications.
User avatar
vegabass
Spooling Up
 
Posts: 797
Joined: September 25th, 2007, 5:01 pm
Location: Canberra ACT

Re: not really an E but close enuff

Postby BROCKYB8 » March 12th, 2010, 12:56 pm

THe real parcel shelf is about the only thing im not sold on in this car .
So is the nos bottle for show or its working with car
www.cveperformance.com
www.autoindulgence.com.au
CARS:
EA Brock B8- 4.11 lsd , CVE custom Cam and head , Wolf v500 , Custom Induction setup , Stock bottom end
207rwkw - 12.89 @ 109.6mph
User avatar
BROCKYB8
Commando
 
Posts: 5230
Joined: July 26th, 2007, 10:29 am

1989 Ford Brock

Re: not really an E but close enuff

Postby Michael (HYPOEB) » March 12th, 2010, 2:12 pm

Looks great!
Looks like alot of work has gone into this car,Good job!
THE OLD:
Black EB XR6
5 Speed Manaul
Mini Spool
Genuine EL GT's


THE NEW:
EB GLI
Snort Stage 3/4 Turbo Kit
EF Hubcaps
322rwhp (240rwkw)

Image

http://www.independentmotorsports.com.au/
User avatar
Michael (HYPOEB)
Breaking Traction
 
Posts: 1518
Joined: November 4th, 2008, 3:09 pm
Location: Morwell, Vic

1993 Ford Falcon

Re: not really an E but close enuff

Postby elitexr » March 13th, 2010, 8:09 am

vegabass wrote:So can we know a bit more about you like, are you the owner of elite car sound, how long you have been in the business, what your future plans for the car is etc etc

I have been into the shop a few times but for some reason havent bought anything. I think im waiting for the right gear to jump out and make me smile. Like your car makes me smile :grin:


na i dont own the shop i just work there been a fitter for about 3 years n the plans for the car: turbo kit snort stage2 on new motor witch is currently underway n maybe a paint job at the end of the year ,wait till end of April then most of the new stuff will be out ,i got some gear that will make you not only smile but shit yourself :lol: OH and we are now dealing CERWIN VEGA we have just finished building a SPL car ,are you going to the all ford day tommorow?

the rear shelf was retrimmed on wed in black so it isnt so out of place
cash cab aint got s@%t
User avatar
elitexr
Idling
 
Posts: 93
Joined: March 4th, 2010, 4:38 pm
Location: canberra

Re: not really an E but close enuff

Postby vegabass » March 13th, 2010, 8:49 pm

Ill try my best to get to the show and ill make myself known. Cerwin Vega? Vegabass? na never heard of it :grin: I have 2 12's and could never get rid of them.

Looks like Ill be waiting till april. :drinks2:
Rollin wrote: You could heat treat and forge the gears in a T5 with the heat and pressure generated between the perfectly formed thighs of Scarlett Johansson scissoring with Jessica Alba, and have them blessed by the Pope, Ghandi, Allah, Buddha and Commando's mum and they'll still be pissy little gears best suited to low HP applications.
User avatar
vegabass
Spooling Up
 
Posts: 797
Joined: September 25th, 2007, 5:01 pm
Location: Canberra ACT

Re: not really an E but close enuff

Postby dylby1 » March 14th, 2010, 9:46 am

saw an envi green AU a while ago stood out tonnes. looked the goods too imo
2003 BA XR6: 18 Inch wheels, Darkest legal tint, 5 Speed Manual
viewtopic.php?f=3&t=16849

Crashed EB Fairmont
viewtopic.php?f=3&t=13494

Image
User avatar
dylby1
Spooling Up
 
Posts: 667
Joined: January 17th, 2010, 2:31 pm
Location: Ouyen, Victoria

Re: not really an E but close enuff

Postby vegabass » March 14th, 2010, 1:34 pm

You stood me up! :cry:
Rollin wrote: You could heat treat and forge the gears in a T5 with the heat and pressure generated between the perfectly formed thighs of Scarlett Johansson scissoring with Jessica Alba, and have them blessed by the Pope, Ghandi, Allah, Buddha and Commando's mum and they'll still be pissy little gears best suited to low HP applications.
User avatar
vegabass
Spooling Up
 
Posts: 797
Joined: September 25th, 2007, 5:01 pm
Location: Canberra ACT

Next

Return to Introduction

Who is online

Users browsing this forum: No registered users