Boosted Falcon

Finally got around to doing it..

ENGINE:
4.0L OHC
Red Back Extractors
High flow cat
2.5 inch exhaust
duel stainless steel tip
ODO- 134,000

INTERIOR/ Stereo:
Pioneer Face
220w pioneer 6" speakers Front
350w pioneer 6"9 speakers Back
F250 Alpine amp-dusnt work
Kicker 12" sub
180w Alpine Tweeters
Rubber Rings for the doors as the bass was rattling the window winder.
Blue LED's behind; Clock, tacho and trasmission.
Floor mats- not the ones in the picture, they are the carpet colour

EXTERIOR

Lowered with kingsprings "lows at the back stock springs at the front
Window tint
XR indicators
AU3 Repeaters

Future plans

Highest Wanted at the top

Performance chip.
LSD 3.45
New Tacho Cluster
New springs, "superlows
BA GT-P rims 19"

Cleanest boot i've ever seen haha, makes me want to rip out my subs and gas tank for the room

thanks, its a fairly clean car all over. im chuckin my sub in there this week.

You're right its very clean. Were the blue leds for the cluster hard to put in?

yeh well sorta, u just gotta know where all the screws are for it, i thought it would only take a few mins but i didnt know there were about 15 screws all up. if u know where they are it should only b a 15 min job, i got the globes of KyletheED4LTR

haha i would lower if first over the snowflakes will loko tough

yeh im getting some new springs on wednesday and hopefully gettin some xr wheels aswell..

Very tidy mate!

Looked tidy as on Friday night, Just slam it on the snowflakes, SSL all round!

thanks guys, as i said above im getting some springs on wednesday, lows and i was thinking of chopping them.
how many coils should i cut off to make it lower but not stupidly low?

Just grab some superlows or ultralows, there all roughly the same price. sphell is selling some VERY cheap.

http://www.boostedfalcon.net/viewtopic.php?f=9&t=4448

Waaaah! What an immaculate engine bay. And as you say, it seems very clean overall.
You and me share the same head unit, yay!

yeh ill put a pic up of my engine bay soon
i am getting some springs off burnt turtle on wednesday

Congrats on your car buddy, gotta dump it for sure;)...
Don't write it off like I did with my first ED
- Ash

man this thing is clean as good clean base to work off.

p.s keep the snowflakes they look tough

[D1SCNT] wrote:man this thing is clean as good clean base to work off.

p.s keep the snowflakes they look tough

hey with your bumbers how did u paint them, did u just spray over the plastic bit or are they different bumpers all together?

Heres the pics of my engine bay from a while ago, it has seen cleaner days but hey..

what are the redbacks like? they look neat

yeh they sound good i dont excatly know performance wize tho.

cars lookin good man

shane-ed wrote:

[D1SCNT] wrote:man this thing is clean as good clean base to work off.

p.s keep the snowflakes they look tough

hey with your bumbers how did u paint them, did u just spray over the plastic bit or are they different bumpers all together?

i sprayed them.
layer a coat of flexi prime then 2-3 coats of hi fill primer, wet rub 600-800 then base coatx2 pearlx3 clearx3

mines a ghia so they came stock color coded so if you found a ghia wreck in cardy then just get the bar's and side moulds.

[D1SCNT] wrote:

shane-ed wrote:

[D1SCNT] wrote:man this thing is clean as good clean base to work off.

p.s keep the snowflakes they look tough

hey with your bumbers how did u paint them, did u just spray over the plastic bit or are they different bumpers all together?

i sprayed them.
layer a coat of flexi prime then 2-3 coats of hi fill primer, wet rub 600-800 then base coatx2 pearlx3 clearx3

mines a ghia so they came stock color coded so if you found a ghia wreck in cardy then just get the bar's and side moulds.

sounds like a bit of screwing about, they look mint tho.
when saw your car i also noticed that u have the plastic bits around the windows painted black, wat did u use 4 that?

2 pack semi gloss.

Very neat man

[D1SCNT] wrote:

shane-ed wrote:

[D1SCNT] wrote:man this thing is clean as good clean base to work off.

p.s keep the snowflakes they look tough

hey with your bumbers how did u paint them, did u just spray over the plastic bit or are they different bumpers all together?

i sprayed them.
layer a coat of flexi prime then 2-3 coats of hi fill primer, wet rub 600-800 then base coatx2 pearlx3 clearx3

mines a ghia so they came stock color coded so if you found a ghia wreck in cardy then just get the bar's and side moulds.

how much would u charge 2 do it?

i got some new rims today
ED XR, they make the car look better i think





selling the old snowflakes refurr to - viewtopic.php?f=9&t=4637

i got bored so i decided to jump on photoshop and slam my car...
and chuck the rims on

lol nice, new wheels look good... 15's right?

i have the same set but in terrible condition so i got new rims...

just need to dump it and u'll b laughin

yeh i got the springs and they r chopped but i duno if i wanna put them in if they are chopped
and yeh i think they r 15x7

i put the sub in last week it sounds ok...


i also bought some new parker lights but there are to bright so im taking them out..




my bright lights, no highbeams

I tinted my rear lights with a spray tint, it worked ok but it dried funny and there is a white streak through the light, cant see from far but you can from close,



I also went down to coffey ford and got some AU3 repeaters, i had to make a few chops and changes to the grey strip and the light holder to make them fit but they look heaps better.
im going to paint the light holder white because you can see the black in the day and it stands out a bit.



and this is how it stands at the moment.



I'm getting some kingsprings within a few weeks, superlows all round, getting it done professionally.

wow sweet man that looks really nice. i did the same with mine, as in dumped it with standard wheels and i liked it like that. and it already sits nicely, not stupidly low, looks nice however supers will make it, trust me hehe!!

nice man

new lights thanks to ash

ah my old cluster globes , lookin good shane, normally not a fan of floor lighting like that but that actually looks decent!, good job!

Wow those lights look mint..person who musta done them did a tiptop job

yeh they look sick i think some one wicked did it..

shane-ed wrote:yeh they look sick i think some one wicked did it..

lol, he has a sick fairlane too, i want it

droooooolssss thats nearly the tidyest ed ive ever seen!!!!!! Me want lol swap

yeh ill second that that is one of the cleanest ed's ever

UPDATE***

I have resently been off the net for a while..

I have put a 15" pioneer sub in the boot with a kenwood 500W amp and it goes wicked as..
i have also just ordered a stage 2 shiftkit from shiftkits.com.au and im hoping to get it soon.
also hoping to get within the next few months to colour code the bumpers and spray my boot garnish,
its a slow process but its slowly getting better,
i went over a speed bump a lil to fast a while ago, i need a new rear muffler and new tires are needed within a few months 2, im thinking if i can make them last til tax return time a set of 19's will go nicely