Boosted Falcon

Im New To This Site,Still A 100% On How To Use It So I Hope Im Doing It Right!

This Is My Black EB XR6,I Brought It For $2000 About A Year Ago And It Was Pritty Trashed Back.

Engine Mods:

Mild Cam.
Abit Of Head Work.
Thermo Fans.
Bored 10 Thou.
Blueprinted.
2.5 Exhaust,Extracors.
Heavy Duty Clutch.
Mini Spool 3.7 Gears.
Rip Shifter.

In Side & Others.

Fairmont Ghia Door Trims.
SAAS Seats.
SAAS Gear Nob.
Momo Wheel.
Monster Tacho.
EA Grill.
Cut Springs Haha.
12inch Slub Bla Bla Bla Bla (Who Cares)
EB/EL GT Wheels,Im Not To Sure What Ones They Are Lol.

When I Brought It The Guy Told Me It Had 132Rwkw And Ran 14.2 Up The 1/4 Mile (Befor It Had The Shit Flogged Out Of It)
The Bottom End Is F%cked,Everytime I Put My Foot Down It Blow ALOT Of Black Smoke,I Want To Spend Around The $5000 Mark On The Motor But I Dont Realy No Where I Can Take It Or Who Knows Alot About These Engines..I've Been Looking At A Jim Mock Dev 4 Motor..Thats $5200 Fitted And Tuned With 160Rwkw But Im Thinking I Could Get More Power Then That With The Money,But Still Im Not 100% Sure,So If Anyone Could Help Me Out With That It Would Be Great Because I Need This Motor Done ASAP.

I Hope You Like

(Having Abit Of Fun)
http://www.youtube.com/watch?v=voQR-0A68R4

Hey bud it looks really clean love black eds

Have you ever thought of going turbo if you go to www.snortperformance.com
they have kits you can buy off them and pretty much bolt straight on.

Looks tidy.

Is it just me or is that pic of ur engine look like it's leaning on a angle a bit?

yehh i hav thought of going turbo i just have no idea how much it would cost.

and that pic of the engine is wen i just got it,it had a broken engine mount

ruleford wrote:Hey bud it looks really clean love black eds

Have you ever thought of going turbo if you go to http://www.snortperformance.com
they have kits you can buy off them and pretty much bolt straight on.

You wouldnt happen too no how much it would cost too fit them kits and get the engine tuned once its on would you??

and dose anyone no how much rwkw a reco EB bottom end can handle??

Black smoke is the MAP sensor has been disconnected

67rce wrote:Black smoke is the MAP sensor has been disconnected

What is that? :S

But It Knocks Somtimes And Then Gose Away Aswell...

Very nice lookin car there mate, bought back some good an bad memories of my old black ed xr6.

Great cars

Well the best person to speak to regarding snort kits on here would be V8capri(paul) he is Cve performance and could definatly tell you the way to go. He has modified most of the e series turbo motors on here as well as my 175kw na motor
Definatly easier to get more power with less money then what a dev kit is worth.

Where in melb or vic are you from.
Love my black cars.

nice car mate love the black

BROCKYB8 wrote:Well the best person to speak to regarding snort kits on here would be V8capri(paul) he is Cve performance and could definatly tell you the way to go. He has modified most of the e series turbo motors on here as well as my 175kw na motor
Definatly easier to get more power with less money then what a dev kit is worth.

Where in melb or vic are you from.
Love my black cars.

Ohh that would be great,how would i get hold of him? i hav seen his sticker on alot of cars!

i live in morwell, down in gippsland if you no where that is?

hey mate nice car,i sore it at sandown in the car park yesterday i had a quick look at it,looks nice

thnax mate,yehh it was a good day yesterday..

mate how did you get photos on your post im new to and cant work it out

love the clean black car mate, but is it just me or is there no 'T' stamped on the front of the head, its a little bit dark and unclear. Stomper burnout aswell

Benny Mac

Very nice, ORSMEB style with EL GT wheels on pearl black paint! Top choice. I also noticed the head isn't Tickford?

its not the orignal head,wen i brought it the bloke i got it off said it was another head he got and put that on...

i reckon get a boot lip and a proper xr front or standered lights would set it right off

i realy dont like the boot lip unless there dumped,and mine isnt realy sitting that low.

i've been looking for the xr front but i cant seem too find anywhere,it had one on it but wen i got the car the front was all smashed up

cini wrote:i realy dont like the boot lip unless there dumped,and mine isnt realy sitting that low.

i've been looking for the xr front but i cant seem too find anywhere,it had one on it but wen i got the car the front was all smashed up

Hi mate welcome aboard nice EB u got there gotta love the black e-series.... as for getting a genuine xr front good luck i tried for ages to get one for my xr. They were either to shitty or to pricey so i gave up & went the after market ones like ur's.......

tezza bear wrote:

cini wrote:i realy dont like the boot lip unless there dumped,and mine isnt realy sitting that low.

i've been looking for the xr front but i cant seem too find anywhere,it had one on it but wen i got the car the front was all smashed up

Hi mate welcome aboard nice EB u got there gotta love the black e-series.... as for getting a genuine xr front good luck i tried for ages to get one for my xr. They were either to shitty or to pricey so i gave up & went the after market ones like ur's.......

thanx mate.

yehh they are hard too get hold of,i just found one and im short on cash atm so im gunna miss out this time.
spewing the front of mine was smashed when i got it...

yeah. the head u have on there is a 94 ab wich is an ef head, they make more power than the tickford heads and are better when fully modified. the black smoke means ur map sensor is fucked not that the engine is fucked and the nock that is there sometimes will most deff be the lifters as they are prone to this. any way good luck and i am a new member to so congrats and nice car

cini wrote:

tezza bear wrote:

cini wrote:i realy dont like the boot lip unless there dumped,and mine isnt realy sitting that low.

i've been looking for the xr front but i cant seem too find anywhere,it had one on it but wen i got the car the front was all smashed up

Hi mate welcome aboard nice EB u got there gotta love the black e-series.... as for getting a genuine xr front good luck i tried for ages to get one for my xr. They were either to shitty or to pricey so i gave up & went the after market ones like ur's.......

thanx mate.

yehh they are hard too get hold of,i just found one and im short on cash atm so im gunna miss out this time.
spewing the front of mine was smashed when i got it...

I have a set of XR lights, black in colour. But the indorcators arent genuine.

PM me if interested

Nice XR mate, love black e series!

Heh, Morwell, I used to do doughies & 1/4 mile runs on Centre Rd in my EB!

Ever come onto the old highway above Maccas sideways doing about 60?

hahahaha! I had to go to Morwell to buy my XR8! The guy who I got it off lives in Churchill, but he met me in Morwell cos I had to take a V-Line out there! What a ball breaker of a trip that was! I don't know how you do it!

Actually, looking at your pics Ev, I know where the previous owner's house is. Looks like Glendonald Road area (Glendonald Estate = aboriginal/housing commission area, yet Glendonald Rd to the south of the estate is a pretty mint area).

Imagine almost doubling the time it took you. That's me V/Lining it from Sale to Melbourne (which I've done a couple of times).

cini, there's a few E-Series people from the Valley area. We're planning a camp at Lake Glenmaggie in June if you're interested (viewtopic.php?f=2&t=8854), and there's usually an annual 1/8 mile day (not an E-Series event, but I've been in the past) on the Queen's Birthday weekend out at Bairnsdale. I'm looking at taking my EB out there for a thrash if you want to meet up with me there mate. It's still a while away...

ClassicAU wrote:hahahaha! I had to go to Morwell to buy my XR8! The guy who I got it off lives in Churchill, but he met me in Morwell cos I had to take a V-Line out there! What a ball breaker of a trip that was! I don't know how you do it!

lol morwell the place to be haha.

Commando wrote:Heh, Morwell, I used to do doughies & 1/4 mile runs on Centre Rd in my EB!

Ever come onto the old highway above Maccas sideways doing about 60?

haha yehh i think everyone knows about centre rd.

years ago it use too be called drag square

Commando wrote:Actually, looking at your pics Ev, I know where the previous owner's house is. Looks like Glendonald Road area (Glendonald Estate = aboriginal/housing commission area, yet Glendonald Rd to the south of the estate is a pretty mint area).

Imagine almost doubling the time it took you. That's me V/Lining it from Sale to Melbourne (which I've done a couple of times).

cini, there's a few E-Series people from the Valley area. We're planning a camp at Lake Glenmaggie in June if you're interested (viewtopic.php?f=2&t=8854), and there's usually an annual 1/8 mile day (not an E-Series event, but I've been in the past) on the Queen's Birthday weekend out at Bairnsdale. I'm looking at taking my EB out there for a thrash if you want to meet up with me there mate. It's still a while away...

oh i didnt no many ppl from the velly were on here.

yehh that sounds great,i will probley only come if i get my motor all rebuilt by then,since i hate driving with all the smoke that comes out the back.
but the motor should be done befor the queens birthday so yehh...

Mate check your map sensor hose as a few people have commented. It's mounted on the right hand side of your engine bay and connects to your log manifold. It's a small black little box with a hose coming out the bottom. You'll find it.,

Nah, not too many Valley people, there's probably 4 or 5 Valley/Ex-Valley members that are active here.

Well, hopefully we'll catch up sometime. I'll keep an eye on your thread for progress

ELXR_96 wrote:Mate check your map sensor hose as a few people have commented. It's mounted on the right hand side of your engine bay and connects to your log manifold. It's a small black little box with a hose coming out the bottom. You'll find it.,

yehh im going too check it 2day after work,shit i realy hope your right,thats going too save me alot of money!

i still dont no if i would trust my motor thou coz i no wat sort of life its had since i no the guy i brought it off.

just thought i would let every1 no that i changed my map sensor and didnt do a dam thing

Gay.

Haha. center road. i work at Latrobe Valley Bandag.... just around the corner.
if ya need any 2nd hand tyres lemmie know and i will hide some.

also got ef/el gli door panels for any one from the valley if ya's want any

Commando wrote:cini, there's a few E-Series people from the Valley area. We're planning a camp at Lake Glenmaggie in June if you're interested (viewtopic.php?f=2&t=8854), and there's usually an annual 1/8 mile day (not an E-Series event, but I've been in the past) on the Queen's Birthday weekend out at Bairnsdale. I'm looking at taking my EB out there for a thrash if you want to meet up with me there mate. It's still a while away...

I'll be up for that when ever it is, lemmie know

theres some newer photos since them other ones are pritty old.
with in the next few weeks bit of luck it will hav EL mirrors EL door handles and an AU console..then the motor will be in a month or so,depending on how quick i can book it in and get it back.
after that just drive the dam thing...

where did ya get the head lights?

Very good looking car. I want to get an EB XR6 next year. Do those headlights fit into an EA

yepp sure do.

If anyone is interested Ive bought a set of these lights from http://www.twinlight.com.au/ before and they really look great. The EF-AU ones all look pretty dodgey, but they do a great looking set for the EA-ED and the XF-XG. I'm guessing someone round here would have seen them before.