Dump3D's ED fairmont And ED XR6

[TriymeD]

Yeah and paint the grey trims white!

40,000km on the clock sheesh must be immaculate!

[pHaT`eL]

White rocks! Just slam it on the TurboBlades, tidy cruiser

Ditch the stickers, ditch the wing, get a catback exhaust and save for something else

[Jake]

I'd put some clear blinker's on the front, lower it and dark tint... some bigger wheels too.

I like the look of EA,EB and ED's without spoilers.
And that ford sticker has to go!

[LTDHO]

Heaps of potential there.

You can have one of the best e-series around if you do the right thing, you already have a perfect starting point.

Wing looks like the XR type, so that can stay.

Neon's, stickers and anything else to suit Lancer can go in the bin.

Lowering it, clear front indicators and sports exhaust (don't even think of a ricer cannon) and the car will be the start of an ultimate cruiser.

One piece of non car advice, pretypre your post in a 'word doc' and run spell check. This will make your posts easier to read and understand.

Good luck mate, show us updated pic's!
(Stickers and toys can be removed today )

[67rce]

Heaps of potential there.

You can have one of the best e-series around if you do the right thing, you already have a perfect starting point.

Wing looks like the XR type, so that can stay.

Neon's, stickers and anything else to suit Lancer can go in the bin.

Lowering it, clear front indicators and sports exhaust (don't even think of a ricer cannon) and the car will be the start of an ultimate cruiser.

One piece of non car advice, pretypre your post in a 'word doc' and run spell check. This will make your posts easier to read and understand.

Good luck mate, show us updated pic's!
(Stickers and toys can be removed today )

LTDHO, it's pre type not pretypre na, seriously guys, put the bold section in the T&C for Newbs

[huggiebear]

what was said a few posts before. if its really got 40k on the clock you got an ultimate car. looks like no damage, do small mods cost you less then 500 bucks and it would be looking sweet, throw another grand at it, extractors, exhaust and cam and your gonna make some nice power. seeing as its almost a new motor it wont need a rebuild.

its the perfect starting point

[ORSMEB]

http://www.boostedfalcon.net/viewtopic.php?f=2&t=3330

viewtopic.php?f=2&t=3513

Spot on

[G3R3N]

Yeah 40Ks on it is brilliant. Lowest milage on E-series anyone?
Mate, in all seriousness, get it lowered. Get some BA XR8s. Swap the interior around to an EL XR on (straight swap).
Chuck a DVD screen in there. Exhaust, extractors, cam, thermos.
And for chr**t's sake, take those damn stickers and toys off there you sissy!

[pHaT`eL]

ELXR interior isnt a straight swap. Rear seats are, front seats have different rails. ED Ghia FTW..

[G3R3N]

ELXR interior isnt a straight swap. Rear seats are, front seats have different rails.

Owned

[Dump3D]

pHaT`eL,

umm could u explain how u do all that kinda shit cause im really thinking thats a cool idea

cause my inside is a bit boring as is


plwase if u know anit like insturction manuals or anithing like that for that kinda stuff

please let me know thanks

[Commando]

Dump3D - viewtopic.php?f=35&t=1882

[Dump3D]

ok guys i have finally saved up a fair amount of money,

im looking at the best way to spend $1000 on my baby

how do you's rekon

*the neons have been removed* the sticker is comen off in a bit


anwaii im after making it look good, performance is not an issue for me atm

so yerh give me sum ideas about what to do


thanks guys

[wolf]

http://cgi.ebay.com.au/FORD-BA-XR8-RIMS ... dZViewItem

[huggiebear]

keep saving a bit more... then get this http://ssv.com.au/product.php?BKP081

[Dump3D]

hey thanks alot huggie

i have made a deal with the SSV people and there sending me brouchures.

i will go up there soon and purchase sum kits, not the one that you sugested but yerh deffenatly one from there

Thanks alot



any ideas??

[Dump3D]

no ideas yet people needa get sumfen going on before i get my p's and show off anything is good...


plus send me pictures of your EA-ED's for ideas thanks alot guys (and chicks)


*i really don't like white, can someone foto shop me a ford EA-ED with some different coulours just for an idea?


thanks

[G3R3N]

$1000 will get you some decent condition second hand stuff.
If you hunt around, you could get extractors, exhaust and a cam, lower springs for $1000
That way, for a small amount, you have a car that goes and is low to da erf
Just my opinion for ya

[G3R3N]

$1000 will get you some decent condition second hand stuff.
If you hunt around, you could get extractors, exhaust and a cam, lower springs for $1000
That way, for a small amount, you have a car that goes and is low to da erf
Just my opinion for ya

[RaLLy_KaTTy]

I dunno why u say it needs more work coz i already love the car!

[Dump3D]

Going get some of that sound proofing shit for the boot, as I’ve just blown it off the frame.

Wish I took photos but dad doesn't know yet, so I fixed it ASAP

Just imagine the outtercase of the boot coming off the frame from the inner boot.

A big bloody mess and a big problem. Very scared to put the subs back on. Hope no damage was done to the gas bottle

Does anyone know here I can get it cheap? Or is there a cheaper and better solution to my boot problem


And another thing, I’m keeping my stickers I decided it makes me very easy to distingwish from all the other white fords.

And the wheels are coming ether this Friday or Sunday


Can’t decided between the BF typhoon type 2

Or the BBOSS ones in my DP, both 19"


Please let me know which you all reckon will be best?

[[Sterling]]

both wheels are shit buy these..
http://www.lexani.com/lexani/wheels/wheel_LX-6.swf

[G3R3N]

Good luck with finding respect with those stickers on...
Plus how loud did you play your subs to make that happen to your boot?

[Commando]

He turned it up to 11.

[huggiebear]

my fairlane had the same issue. old age is the main factor...

i used expanda foam in the framework to keep the metal away from the frame a lil and then flashtacked it (30 bucks a roll from bunnings) went from major rattles to none at all... and for a total of under 40 bucks.

[huggiebear]

oh and to hear the difference in before and after i got photo's. not the best quality in sound tho but you can hear the rattles

BEFORE

AFTER

[pHaT`eL]

If your getting rims, id personally go the BF Mk2 Phoons, in the correct offset.

[Dump3D]

fukken oath huggie, dats exactly wat mines sounded like
deffenatly wat i needed, umm do u think i could get away with just the tape?? dad's got sum in da shed might just pinch it.

hopfully will work, as its a big problem, cause my boot is alot smaller than normal due to the sub boxes being so big and the gas bottle being der.



o btw, monday get the car lowered with kingsprings, and new BF MK2 typhoons 19" put on, fukken insane :D:D:D
getting full detailing done nxt wednesday and maybe a recoat of the interior.



thanks again huggie

[Simple6]

What'd price did you payto get the rims and tyres, may I ask?

Just looking myself at rims myself so I also love to see a pic with them on!

[Dump3D]

umm i paid $1800, but pulled sum strings with guys i no and got em for $1500, and all put on and aligned and other shit at TTF


in Dandenong

check it out there extremly good, quick and reasonable.

and there are over 800 wheels in the shop, and can import other from over seas


so yerh

will have piks on mondaii


thanks mate

[4LEDboy]

Very nice fairmont you have there, even better with only 40k

However, like everyone else said, scrap the sticker on the bonnet and the neons, also what possessed your dad to put that sticker on there in the first place?

[Dump3D]

i like them all

dude i have no idea but makes ppl look and makes it stand out, maybe when i get new paint job will do sumfen more interesting than that

like haven't got the time ither to take it off, gotta get the heater and melt it off. CBF


aniwaii yerh its my baby

i call her Dump3D

[Dump3D]

ok here they are my new piks of the mags,

haven't had much time to really have a look as i was helping out.

will get better photos up very soon but at least this gives you the idea.



and yes i no it would look much sweeter lowered.













*my baby is getting better :D:D*

[Dump3D]

ok here they are my new piks of the mags,

haven't had much time to really have a look as i was helping out.

will get better photos up very soon but at least this gives you the idea.



and yes i no it would look much sweeter lowered.













*my baby is getting better :D:D*

[Stengord]

They're pretty nice, how much were they

And does that say FPV on the centre? :S

[DOHC-EB]

yer mate its starting to look a heap better. keep up the good work and start doing some perfermance mods

[Commando]

Nice RTV

[Dump3D]

here are some *im cool shots* 2morrow will get some side and rear veiw ones








WEll yerh, the frist thing is get it lowered. then maybe a new muffler and shit cause thats on the go.

but yerh maybe a poddy and sum other shit but no real plains for the engine. but the interior starts next week

[Dump3D]

what type of springs do you think i should get, low, super lows, or ultra lows?


can't decided and does any one no the prices normally for these types. want the kingspring brand


let me know

[huggiebear]

superlows. kingsprings i got fo 120 a pair