brents BF XR6T, 453rwkw

Post pics of your rides here

Re: brents BF XR6T, 453rwkw

Postby Mr_4.0 » September 12th, 2012, 9:50 pm

I know people who have used ethanol testers on eflex. It has varied from e60 to e75 straight from the bowser. When you tune a car on Ethanol fuel, a difference of 10% Ethanol is about a .5-.6 afr change requirement in the tune.
United is always atleast e85 and goes no higher than e90. Not batches I've seen tested anyway.

Caltex will always tell you what they want you to hear. They probably don't want Holden eflex drivers complaining to them about hard starting in winter.

On a side note, e50 can make nearly the same power as e85. E40-e50 is the sweet spot between power/economy. But the lambda changes a lot with ethanol fuel %. So you require a fairly steady ethanol content or the tune is toast.

Sorry nut. Back to your thread.
EF 1994 Fairmont 4.0 Auto, 3500rpm stall, 4.11's, head work, 1521a cam, moates chip, difillipo intake, pacemakers (14.63 @ 98MPH) Now sold!!

2003 Ba xr6 turbo - Atomic short, DTM auto, full nizpro stage 2 kit, eaton truetrack
HeadSex Tuned (11.43 @ 123mph)
User avatar
Mr_4.0
Full Boost
 
Posts: 2334
Joined: August 24th, 2007, 1:04 am
Location: Victoria
Has Liked: 116 times
Been Liked: 70 times

Re: brents BF XR6T, 453rwkw

Postby iCER » September 12th, 2012, 10:14 pm

must feel awesome driving a 12 second car :D
Dyno-Mite Performance Tuned
+480RWKW on ~24psi 140+MPH CLUB
Current Fastest time: 10.05 @ 136mph on 275 ET streets.

Mod list: http://www.boostedfalcon.net/garage_vehicle.php?mode=view_vehicle&VID=138
User avatar
iCER
Full Boost
 
Posts: 2271
Joined: April 21st, 2010, 11:24 am
Has Liked: 58 times
Been Liked: 57 times

Re: brents BF XR6T, 453rwkw

Postby Mr_4.0 » September 12th, 2012, 10:18 pm

Huh?
EF 1994 Fairmont 4.0 Auto, 3500rpm stall, 4.11's, head work, 1521a cam, moates chip, difillipo intake, pacemakers (14.63 @ 98MPH) Now sold!!

2003 Ba xr6 turbo - Atomic short, DTM auto, full nizpro stage 2 kit, eaton truetrack
HeadSex Tuned (11.43 @ 123mph)
User avatar
Mr_4.0
Full Boost
 
Posts: 2334
Joined: August 24th, 2007, 1:04 am
Location: Victoria
Has Liked: 116 times
Been Liked: 70 times

Re: brents BF XR6T, 453rwkw

Postby 67rce » September 12th, 2012, 11:26 pm

iCER wrote:must feel awesome driving a 12 second car :D

Must feel awesome bagging someone for running a 12 when the target was a fun streeter, not a "480rwkw 9 sec" race car with plates.....
Cammed Suzuki Baleno, Haltech PS1000, E85
User avatar
67rce
Breaking Intake Welds
 
Posts: 4073
Joined: October 27th, 2007, 3:39 pm
Location: Brisbane
Has Liked: 170 times
Been Liked: 100 times

Re: brents BF XR6T, 453rwkw

Postby Mr_4.0 » September 13th, 2012, 1:48 am

Who's he aiming that at?
EF 1994 Fairmont 4.0 Auto, 3500rpm stall, 4.11's, head work, 1521a cam, moates chip, difillipo intake, pacemakers (14.63 @ 98MPH) Now sold!!

2003 Ba xr6 turbo - Atomic short, DTM auto, full nizpro stage 2 kit, eaton truetrack
HeadSex Tuned (11.43 @ 123mph)
User avatar
Mr_4.0
Full Boost
 
Posts: 2334
Joined: August 24th, 2007, 1:04 am
Location: Victoria
Has Liked: 116 times
Been Liked: 70 times

Re: brents BF XR6T, 453rwkw

Postby NUT347 » September 13th, 2012, 6:48 am

iCER wrote:must feel awesome driving a 12 second car :D


Least I know how to drive it properly :D
NUT347
Melting Pistons
 
Posts: 7553
Joined: June 22nd, 2008, 7:09 pm
Location: Brisbane
Has Liked: 911 times
Been Liked: 1254 times

Re: brents BF XR6T, 453rwkw

Postby iCER » September 13th, 2012, 1:25 pm

was directed at nut347. MR_4.0 :P

if you think 'driving a 453rwkw car and running 12s' is properly, good for you :) I'd class 1.6x or better 60 footers as a decent driver. But thats my description :)

67rce, if its a fun streeter then they wouldn't care taking it to the track over and over. There is always a that little bit in your mind of wanting to get a good time. Hence they have had the discussion of a powerglide already. As we all know, always starts with fun, then gets competitive to try play with the big boys running 10s and faster :)
Dyno-Mite Performance Tuned
+480RWKW on ~24psi 140+MPH CLUB
Current Fastest time: 10.05 @ 136mph on 275 ET streets.

Mod list: http://www.boostedfalcon.net/garage_vehicle.php?mode=view_vehicle&VID=138
User avatar
iCER
Full Boost
 
Posts: 2271
Joined: April 21st, 2010, 11:24 am
Has Liked: 58 times
Been Liked: 57 times

Re: brents BF XR6T, 453rwkw

Postby 67rce » September 13th, 2012, 1:30 pm

Lol. It's been out once.... Makes it a track hack? Fkn lol. Why cant it go glide for monster powerskids?
Cammed Suzuki Baleno, Haltech PS1000, E85
User avatar
67rce
Breaking Intake Welds
 
Posts: 4073
Joined: October 27th, 2007, 3:39 pm
Location: Brisbane
Has Liked: 170 times
Been Liked: 100 times

Re: brents BF XR6T, 453rwkw

Postby needfordspeed » September 13th, 2012, 1:31 pm : braad, NUT347 Likes this post

It's a manual you muppet, put a manual in yours and I doubt you could even run a 13.

And 10's is hardly playing with the big boys, your a good example that shows anyone can do it.
1988 EA S-Pack - 10.6@125MPH New build underway
User avatar
needfordspeed
Moderator
Moderator
 
Posts: 5256
Joined: July 13th, 2007, 2:13 pm
Has Liked: 110 times
Been Liked: 417 times

1988 Ford S Pack

Re: brents BF XR6T, 453rwkw

Postby NUT347 » September 13th, 2012, 2:01 pm : EF ECTIV Likes this post

Lol fucken snap gilly.

Lol@ big boys, also lol at only running a 12.

I lol at your MPH, considering its dodgy.

Also, this ran 12.3@125 with 406rwkw, a slow take off and the first time I've ever driven this car at the drags.

I'll tell ya what, you can drive this thing at the drags, I'll throw ya the keys. If you can beat my time on your first run I'll give you $1000. As driven, with more power it has now, on street Tyres.

Deal?

But if you lose, i get to slog ya one in the face ****.
NUT347
Melting Pistons
 
Posts: 7553
Joined: June 22nd, 2008, 7:09 pm
Location: Brisbane
Has Liked: 911 times
Been Liked: 1254 times

Re: brents BF XR6T, 453rwkw

Postby Mr_4.0 » September 13th, 2012, 2:17 pm : get_an_ea_today Likes this post

Seems legit
EF 1994 Fairmont 4.0 Auto, 3500rpm stall, 4.11's, head work, 1521a cam, moates chip, difillipo intake, pacemakers (14.63 @ 98MPH) Now sold!!

2003 Ba xr6 turbo - Atomic short, DTM auto, full nizpro stage 2 kit, eaton truetrack
HeadSex Tuned (11.43 @ 123mph)
User avatar
Mr_4.0
Full Boost
 
Posts: 2334
Joined: August 24th, 2007, 1:04 am
Location: Victoria
Has Liked: 116 times
Been Liked: 70 times

Re: brents BF XR6T, 453rwkw

Postby Parfrey » September 13th, 2012, 3:09 pm

Manual= so much harder to drag than an auto.
Doing a 1.5 60' with an auto was easier than doing a 2.0 in a manual IMO!

I bet it does feel awesome driving this 12 second car.... would be epic fun on the street with that setup!
FG GT335 Tune only 376rwkw
GU Patrol TD42t @30psi
User avatar
Parfrey
Breaking Traction
 
Posts: 1944
Joined: August 12th, 2007, 6:34 pm
Has Liked: 82 times
Been Liked: 131 times

Re: brents BF XR6T, 453rwkw

Postby NUT347 » September 13th, 2012, 6:36 pm

No parfrey, icer said the big boys do 1.6 60s with manuals.

We are just trying to play with the high rollers :cry:
NUT347
Melting Pistons
 
Posts: 7553
Joined: June 22nd, 2008, 7:09 pm
Location: Brisbane
Has Liked: 911 times
Been Liked: 1254 times

Re: brents BF XR6T, 453rwkw

Postby Rollin » September 13th, 2012, 7:27 pm

I must be a shit driver, only managed 1.8s on street tyres in my ED :(

BA's are slow and shit anyway, the ED also did 12.3s with only 400rwhp :P
Image

Look at your car. Now back to mine. Now back to yours. Now back to mine. Sadly, yours isn't mine. But if you stopped buying dodgy cars and bought an ED, yours could be like mine. Look down. Back up. Where are you? ...You're on BoostedFalcon, reading the signature your signature could be like! Anything is possible when your car looks like my car... I'm on a computer.
User avatar
Rollin
Melting Pistons
 
Posts: 7933
Joined: July 15th, 2007, 4:35 pm
Location: Brisbane - Driving around in a metal and glass case of emotion!
Has Liked: 327 times
Been Liked: 751 times

1994 Ford Falcon

Re: brents BF XR6T, 453rwkw

Postby Parfrey » September 13th, 2012, 8:08 pm

Haha big boys!! I feel like such a little man with my 11 sec car :blush:

Did you get any pics from the weekend? That green FG is mad!
FG GT335 Tune only 376rwkw
GU Patrol TD42t @30psi
User avatar
Parfrey
Breaking Traction
 
Posts: 1944
Joined: August 12th, 2007, 6:34 pm
Has Liked: 82 times
Been Liked: 131 times

Re: brents BF XR6T, 453rwkw

Postby NUT347 » September 13th, 2012, 8:35 pm

No pics yet.

Brent has alot of videos I'll have to get off him.

Just when I thought icer was starting to pull his head in then !BAM! Back to dumbshit in no time haha.
NUT347
Melting Pistons
 
Posts: 7553
Joined: June 22nd, 2008, 7:09 pm
Location: Brisbane
Has Liked: 911 times
Been Liked: 1254 times

Re: brents BF XR6T, 453rwkw

Postby Mr_4.0 » September 13th, 2012, 8:54 pm

The calm before the storm!
EF 1994 Fairmont 4.0 Auto, 3500rpm stall, 4.11's, head work, 1521a cam, moates chip, difillipo intake, pacemakers (14.63 @ 98MPH) Now sold!!

2003 Ba xr6 turbo - Atomic short, DTM auto, full nizpro stage 2 kit, eaton truetrack
HeadSex Tuned (11.43 @ 123mph)
User avatar
Mr_4.0
Full Boost
 
Posts: 2334
Joined: August 24th, 2007, 1:04 am
Location: Victoria
Has Liked: 116 times
Been Liked: 70 times

Re: brents BF XR6T, 453rwkw

Postby iCER » September 13th, 2012, 10:11 pm

cant have that now can we nut374 :D :cray:

everyone should update their times on the official boosted falcon 1/4mile page. I know I have :)
Dyno-Mite Performance Tuned
+480RWKW on ~24psi 140+MPH CLUB
Current Fastest time: 10.05 @ 136mph on 275 ET streets.

Mod list: http://www.boostedfalcon.net/garage_vehicle.php?mode=view_vehicle&VID=138
User avatar
iCER
Full Boost
 
Posts: 2271
Joined: April 21st, 2010, 11:24 am
Has Liked: 58 times
Been Liked: 57 times

Re: brents BF XR6T, 453rwkw

Postby braad » September 14th, 2012, 12:09 pm

needfordspeed wrote:It's a manual you muppet, put a manual in yours and I doubt you could even run a 13.

And 10's is hardly playing with the big boys, your a good example that shows anyone can do it.


Fucking lol!!
User avatar
braad
Breaking Traction
 
Posts: 1113
Joined: September 15th, 2009, 3:01 pm
Location: Sydney
Has Liked: 175 times
Been Liked: 67 times

1996 Ford XR-Ghia V8

Re: brents BF XR6T, 453rwkw

Postby NUT347 » October 19th, 2012, 10:06 pm : XR_Lightning Likes this post

Image
NUT347
Melting Pistons
 
Posts: 7553
Joined: June 22nd, 2008, 7:09 pm
Location: Brisbane
Has Liked: 911 times
Been Liked: 1254 times

Re: brents BF XR6T, 453rwkw

Postby Che16 » October 19th, 2012, 10:32 pm

as in out with the old and in with the new or just fcking gone :shock:
commiting sin and bought a holden ve ss afm but loving it
Che16
Cruising
 
Posts: 365
Joined: November 10th, 2008, 4:54 pm
Location: HerveyBay
Has Liked: 3 times
Been Liked: 0 time

Re: brents BF XR6T, 453rwkw

Postby NUT347 » October 19th, 2012, 10:48 pm

Yeah it went bang lol.

Image

It only has 70000km on it, but it doesn't help when 56000 has been ~500rwhp lol.

I think it's done well!
NUT347
Melting Pistons
 
Posts: 7553
Joined: June 22nd, 2008, 7:09 pm
Location: Brisbane
Has Liked: 911 times
Been Liked: 1254 times

Re: brents BF XR6T, 453rwkw

Postby OED666 » October 19th, 2012, 11:02 pm

Is it just the diff lid??
Image

Sundeep wrote:even though Falcon manuals are rough as guts. I just like smashing and skating through gears.
User avatar
OED666
Hitting N2O
 
Posts: 3792
Joined: August 3rd, 2007, 8:20 am
Location: At your mum's house, and she loves it!
Has Liked: 194 times
Been Liked: 121 times

1994 Ford Falcon

Re: brents BF XR6T, 453rwkw

Postby NUT347 » October 19th, 2012, 11:08 pm

Lol nah.

It now has a 6 speed. Neutral.
NUT347
Melting Pistons
 
Posts: 7553
Joined: June 22nd, 2008, 7:09 pm
Location: Brisbane
Has Liked: 911 times
Been Liked: 1254 times

Re: brents BF XR6T, 453rwkw

Postby 09SR5 » October 20th, 2012, 4:12 am

Hate when that happens
09 Hilux SR5 4X4
Gun Metal
3.0l Turbo Diesel
5 Speed
Toyota Alloy Bull Bar
IPF Driving lights
Goodyear Warangler MTR tires
User avatar
09SR5
Cruising
 
Posts: 396
Joined: July 20th, 2007, 9:47 am
Location: Western Vic
Has Liked: 0 time
Been Liked: 35 times

Re: brents BF XR6T, 453rwkw

Postby NUT347 » January 3rd, 2013, 3:09 pm

Bump.

9" 4 link coming soon!
NUT347
Melting Pistons
 
Posts: 7553
Joined: June 22nd, 2008, 7:09 pm
Location: Brisbane
Has Liked: 911 times
Been Liked: 1254 times

Re: brents BF XR6T, 453rwkw

Postby bentls » January 3rd, 2013, 3:43 pm

NUT347 wrote:Bump.

9" 4 link coming soon!

but solid bushes were too extreme for street?

OK ICER hahaha
coming 2013 maybe?
Image
94 soarer
01 senator signature 5.7
96 k11 micra
User avatar
bentls
Full Boost
 
Posts: 2882
Joined: July 16th, 2007, 10:10 pm
Has Liked: 277 times
Been Liked: 158 times

Re: brents BF XR6T, 453rwkw

Postby bentls » January 3rd, 2013, 3:45 pm

ps ive seen a na 6 ba throw a pinion gear through the diff housing, maybe it was just a dunger diff, id stick with stock irs if i was leaving it as a street car maybe just make sure the new crown wheel and pinion are stronger it seems they usually go through the housing than the housing giving way for no reason... but having said that i think tristan warped a housing too with 375rwkw of 4th gear skating non stop
Image
94 soarer
01 senator signature 5.7
96 k11 micra
User avatar
bentls
Full Boost
 
Posts: 2882
Joined: July 16th, 2007, 10:10 pm
Has Liked: 277 times
Been Liked: 158 times

Re: brents BF XR6T, 453rwkw

Postby NUT347 » January 3rd, 2013, 3:53 pm

Lol Bentley, if you had any idea.

A 4 link properly setup, with coil overs is probably just as good ride as a clunky shitty IRS setup.

IRS is fucken gay! And fitting solid mounts would be a waste of time IMO. The carries are shit, the gears are shit, the CVs are shit, the cases are shit and so is the setup in general.

Single piece tailshaft (no shit centre bearing to bang the floor constantly) no clunky arse diff bushes that wear out every 10000kms, and most of all, more traction.
NUT347
Melting Pistons
 
Posts: 7553
Joined: June 22nd, 2008, 7:09 pm
Location: Brisbane
Has Liked: 911 times
Been Liked: 1254 times

Re: brents BF XR6T, 453rwkw

Postby NUT347 » January 3rd, 2013, 3:54 pm : misk Likes this post

BA NA 6s have a smaller diff too. M78 vs m86. I thought you were a mechanic? ;)
NUT347
Melting Pistons
 
Posts: 7553
Joined: June 22nd, 2008, 7:09 pm
Location: Brisbane
Has Liked: 911 times
Been Liked: 1254 times

Re: brents BF XR6T, 453rwkw

Postby bentls » January 3rd, 2013, 5:36 pm

forgot you guys have the thumb rule up there haha, in vic. if you have an un engineered 4 link setup you're going to have a bad time...
yes i know a m78 and m86 diffs are different sizes, but the 300+ kw difference more than makes up for it

also in before icer tells you not to put coilovers on the 4 link cos you wont get any traction ;)
Image
94 soarer
01 senator signature 5.7
96 k11 micra
User avatar
bentls
Full Boost
 
Posts: 2882
Joined: July 16th, 2007, 10:10 pm
Has Liked: 277 times
Been Liked: 158 times

Re: brents BF XR6T, 453rwkw

Postby NUT347 » January 3rd, 2013, 7:42 pm

Lol mod playing wont be a problem.
NUT347
Melting Pistons
 
Posts: 7553
Joined: June 22nd, 2008, 7:09 pm
Location: Brisbane
Has Liked: 911 times
Been Liked: 1254 times

Re: brents BF XR6T, 453rwkw

Postby Ef_frmnt » January 3rd, 2013, 7:48 pm

A properly engineered 4-Link is easy to get set up and mod plated, McDonald Brothers do bolt in kits for lots of Falcons and Commodores.
XD Falcon 427ci - long term drag (in-and-out-of-shed) car project
1992 Ford Courier LS1, big cam, big stall, big nitrous, and soon to be packing a big turbo..
PX MKii Wildtrak 20" Monster wheels with 33x10 tyres, Fox Shocks, custom stereo install, ARB Summit rear bar
User avatar
Ef_frmnt
Full Boost
 
Posts: 2069
Joined: July 24th, 2007, 7:50 pm
Has Liked: 157 times
Been Liked: 257 times

Re: brents BF XR6T, 453rwkw

Postby OED666 » January 3rd, 2013, 9:46 pm

Don't fit a single piece tailshaft!!! If it has axle tramp then it will destroy centre-bearings. With a 4 link you shouldn't have that problem.
Image

Sundeep wrote:even though Falcon manuals are rough as guts. I just like smashing and skating through gears.
User avatar
OED666
Hitting N2O
 
Posts: 3792
Joined: August 3rd, 2007, 8:20 am
Location: At your mum's house, and she loves it!
Has Liked: 194 times
Been Liked: 121 times

1994 Ford Falcon

Re: brents BF XR6T, 453rwkw

Postby h3ndo » January 3rd, 2013, 10:05 pm

nice looking bf mate nice power figure's you making too :good:
h3ndo
Idling
 
Posts: 12
Joined: January 3rd, 2013, 11:30 am
Has Liked: 12 times
Been Liked: 0 time

Re: brents BF XR6T, 453rwkw

Postby NUT347 » January 3rd, 2013, 10:48 pm

Why not fit a single piece?

1/4 of the price and just as strong.

Ef_frmnt, some of it is weld in. The most drastic change is it needs the fuel tank removed and a fuel cell fitted.
NUT347
Melting Pistons
 
Posts: 7553
Joined: June 22nd, 2008, 7:09 pm
Location: Brisbane
Has Liked: 911 times
Been Liked: 1254 times

Re: brents BF XR6T, 453rwkw

Postby old_mate » January 3rd, 2013, 11:48 pm

Single shafts are loooong and I am reading many people having trouble balancing them.
G6E Turbo.
User avatar
old_mate
Spooling Up
 
Posts: 894
Joined: July 20th, 2007, 11:34 pm
Has Liked: 5 times
Been Liked: 27 times

Re: brents BF XR6T, 453rwkw

Postby justa6 » January 4th, 2013, 5:03 am

sounds good. will make it a weapon at the drags if it ever gets an auto. i've got a single piece tailshaft in the ute and at some speeds you can feel it. i've played with pinion angle's, gearbox height trying to get it right. At the end of the day i think it's just to long. so when the diff breaks and a 9" goes in, it will be cut in half.

In saying that, aren't sedans a fair bit shorter?
Image
manley rods, sps pistons, billet surecam, gt4202r 1.15, 6boost manifold, 60mm gate, 4" exhaust, nizpro plenum, 80mm throttle body, bosch 2000cc injectors, 2x044, -8 fuel line, standard fuel rail modified -8 in-out. c4 box 3000 stall, standard diff with 31 spline axles, full spool.
477rwkw 24psi. 9.80 @ 145mph
User avatar
justa6
Full Boost
 
Posts: 2986
Joined: February 24th, 2008, 2:55 pm
Has Liked: 88 times
Been Liked: 525 times

1999 Ford xr6 ute

Re: brents BF XR6T, 453rwkw

Postby bentls » January 4th, 2013, 7:35 am

Its funny ba people and commo people talk about going solid tailshafts all the time yet e series people go putring 2 peice in....

Apparently an f250 centre bearing can be modified to fit but it gets a little costly
Image
94 soarer
01 senator signature 5.7
96 k11 micra
User avatar
bentls
Full Boost
 
Posts: 2882
Joined: July 16th, 2007, 10:10 pm
Has Liked: 277 times
Been Liked: 158 times

Re: brents BF XR6T, 453rwkw

Postby NUT347 » January 4th, 2013, 12:48 pm

If a tail shaft vibrates its out of balance.

I've been in many 10 sec old school cars with single piece tailshafts that don't vibrate.

Paul, this car hasn't ever axle tramped, but the centre bearing i got from you is 10000kms old and already pretty buggered.
NUT347
Melting Pistons
 
Posts: 7553
Joined: June 22nd, 2008, 7:09 pm
Location: Brisbane
Has Liked: 911 times
Been Liked: 1254 times

PreviousNext

Return to The Showroom

Who is online

Users browsing this forum: No registered users