DOMN8N'S EL ghia

Post pics of your rides here

Re: DOMN8N'S EL ghia

Postby SnipeZ » October 22nd, 2013, 4:04 pm

If anything I've had it snap the crown wheel


Cheers
1998 EL XR6 - Stolen
1997 EL Fairmont V8 - Current
5.0 V8
Full Leather
EL GT Headers
2"1/2 Twin System
FPV Dark Argent
Full Tickford Lip Kit
Low :)
Soon To Be Manual
User avatar
SnipeZ
Hitting N2O
 
Posts: 3838
Joined: May 3rd, 2008, 11:49 am
Has Liked: 235 times
Been Liked: 170 times

Re: DOMN8N'S EL ghia

Postby YOUNGY09 » October 22nd, 2013, 4:26 pm

There the 0575
3:45 I'm changing them to the 0578 there a different pitch and different pinion apparently alot stronger
YOUNGY09
Idling
 
Posts: 169
Joined: November 5th, 2012, 1:42 pm
Has Liked: 5 times
Been Liked: 9 times

1997 Ford Fairmont Ghia

Re: DOMN8N'S EL ghia

Postby YOUNGY09 » October 22nd, 2013, 4:27 pm

Image
Got some new brakes for the Missus territory they look sick haha
YOUNGY09
Idling
 
Posts: 169
Joined: November 5th, 2012, 1:42 pm
Has Liked: 5 times
Been Liked: 9 times

1997 Ford Fairmont Ghia

Re: DOMN8N'S EL ghia

Postby YOUNGY09 » October 22nd, 2013, 4:29 pm

Image
My Missus territory and my car still on the hoist
YOUNGY09
Idling
 
Posts: 169
Joined: November 5th, 2012, 1:42 pm
Has Liked: 5 times
Been Liked: 9 times

1997 Ford Fairmont Ghia

Re: DOMN8N'S EL ghia

Postby Jayedxr6 » October 22nd, 2013, 8:22 pm : SnipeZ Likes this post

You have the rotor on the wrong side
Xh falcon turbo. 420rwhp 16 psi.
User avatar
Jayedxr6
Breaking Traction
 
Posts: 1954
Joined: November 26th, 2011, 6:40 pm
Has Liked: 179 times
Been Liked: 149 times

1994 Ford ED Falcon XR6

Re: DOMN8N'S EL ghia

Postby Rollin » October 22nd, 2013, 9:14 pm

Yep - unless they're not directional.
Image

Look at your car. Now back to mine. Now back to yours. Now back to mine. Sadly, yours isn't mine. But if you stopped buying dodgy cars and bought an ED, yours could be like mine. Look down. Back up. Where are you? ...You're on BoostedFalcon, reading the signature your signature could be like! Anything is possible when your car looks like my car... I'm on a computer.
User avatar
Rollin
Melting Pistons
 
Posts: 7933
Joined: July 15th, 2007, 4:35 pm
Location: Brisbane - Driving around in a metal and glass case of emotion!
Has Liked: 327 times
Been Liked: 751 times

1994 Ford Falcon

Re: DOMN8N'S EL ghia

Postby SnipeZ » October 23rd, 2013, 6:27 am

Judging by the picture I'd say they were directional.


Cheers
1998 EL XR6 - Stolen
1997 EL Fairmont V8 - Current
5.0 V8
Full Leather
EL GT Headers
2"1/2 Twin System
FPV Dark Argent
Full Tickford Lip Kit
Low :)
Soon To Be Manual
User avatar
SnipeZ
Hitting N2O
 
Posts: 3838
Joined: May 3rd, 2008, 11:49 am
Has Liked: 235 times
Been Liked: 170 times

Re: DOMN8N'S EL ghia

Postby Rollin » October 23rd, 2013, 10:55 am

VT onwards HSV had directional grooves like that, but they only went the right direction on one side...
Image

Look at your car. Now back to mine. Now back to yours. Now back to mine. Sadly, yours isn't mine. But if you stopped buying dodgy cars and bought an ED, yours could be like mine. Look down. Back up. Where are you? ...You're on BoostedFalcon, reading the signature your signature could be like! Anything is possible when your car looks like my car... I'm on a computer.
User avatar
Rollin
Melting Pistons
 
Posts: 7933
Joined: July 15th, 2007, 4:35 pm
Location: Brisbane - Driving around in a metal and glass case of emotion!
Has Liked: 327 times
Been Liked: 751 times

1994 Ford Falcon

Re: DOMN8N'S EL ghia

Postby YOUNGY09 » October 23rd, 2013, 8:34 pm

I dunno I just put them in generally if there directional they say left n right? These didn't the other side is the exact same
YOUNGY09
Idling
 
Posts: 169
Joined: November 5th, 2012, 1:42 pm
Has Liked: 5 times
Been Liked: 9 times

1997 Ford Fairmont Ghia

Re: DOMN8N'S EL ghia

Postby YOUNGY09 » October 23rd, 2013, 8:40 pm

What does it do?
My el has them fitted the other way haha
YOUNGY09
Idling
 
Posts: 169
Joined: November 5th, 2012, 1:42 pm
Has Liked: 5 times
Been Liked: 9 times

1997 Ford Fairmont Ghia

Re: DOMN8N'S EL ghia

Postby Jayedxr6 » October 23rd, 2013, 8:56 pm

Its pretty clear how the directional slots work. The rotor goes around with the brake pads clamped, and if there the other way around from the picture it forces hot brake gasses, dust etc up, out and away from the brakes!
Xh falcon turbo. 420rwhp 16 psi.
User avatar
Jayedxr6
Breaking Traction
 
Posts: 1954
Joined: November 26th, 2011, 6:40 pm
Has Liked: 179 times
Been Liked: 149 times

1994 Ford ED Falcon XR6

Re: DOMN8N'S EL ghia

Postby YOUNGY09 » October 25th, 2013, 7:22 pm

Full spool n ba xr6 gear in and fmu in hanged a massive burnout at my work n drifted entire street asit was its last drive till new motor so I don't care get it tuned as it fucking loved it haha
Full spools are mint btw my car hangs hoops on a 5 cent coin
YOUNGY09
Idling
 
Posts: 169
Joined: November 5th, 2012, 1:42 pm
Has Liked: 5 times
Been Liked: 9 times

1997 Ford Fairmont Ghia

Re: DOMN8N'S EL ghia

Postby NUT347 » October 25th, 2013, 7:33 pm : misk, SnipeZ Likes this post

There is no helping some people.

Your turbo is probably fucked now too btw.
NUT347
Melting Pistons
 
Posts: 7553
Joined: June 22nd, 2008, 7:09 pm
Location: Brisbane
Has Liked: 911 times
Been Liked: 1254 times

Re: DOMN8N'S EL ghia

Postby misk » October 25th, 2013, 10:07 pm

indeed, you'd want to hope your oil pressure had been good after the engine was fucked...
i killed a turbo after i spun a bearing and had no oil pressure.
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger

soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing

XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities :)
User avatar
misk
Melting Pistons
 
Posts: 10047
Joined: October 14th, 2008, 10:31 am
Location: dandenong
Has Liked: 298 times
Been Liked: 295 times

Re: DOMN8N'S EL ghia

Postby YOUNGY09 » October 25th, 2013, 11:02 pm

Turbos mint just saying
Doesn't matter anymore anyways
Gonna pull my spare engine out when I'm back at work n start building it will be booked in for dyno before its driven with new engine
I didn't want your help either mate just saying
I don't care what you all think I drive my car how I want n I expect to blow shit up as when I do blow shit up that means I can rebuild it and make it stronger its just my toy n **** its fun!
I can't wait to pull my engine out get new 1 in and a tune then c what it can do
YOUNGY09
Idling
 
Posts: 169
Joined: November 5th, 2012, 1:42 pm
Has Liked: 5 times
Been Liked: 9 times

1997 Ford Fairmont Ghia

Re: DOMN8N'S EL ghia

Postby YOUNGY09 » October 25th, 2013, 11:07 pm

Also oil pressure on engine is low but measured the flow rate of feed line j wouldn't drive it if it was gonna blow turbo as it was just rebuilt at mtq
YOUNGY09
Idling
 
Posts: 169
Joined: November 5th, 2012, 1:42 pm
Has Liked: 5 times
Been Liked: 9 times

1997 Ford Fairmont Ghia

Re: DOMN8N'S EL ghia

Postby private9 » October 26th, 2013, 12:00 am

Learn some basic writing skills and get a tune. Just saying.
Last edited by private9 on October 26th, 2013, 7:03 am, edited 2 times in total.
Image
User avatar
private9
Hitting N2O
 
Posts: 3388
Joined: August 13th, 2007, 7:58 pm
Location: Not in the diner Alf, not in the diner...
Has Liked: 4 times
Been Liked: 185 times

Re: DOMN8N'S EL ghia

Postby private9 » October 26th, 2013, 12:00 am

Double post.
Last edited by private9 on October 26th, 2013, 7:02 am, edited 3 times in total.
Image
User avatar
private9
Hitting N2O
 
Posts: 3388
Joined: August 13th, 2007, 7:58 pm
Location: Not in the diner Alf, not in the diner...
Has Liked: 4 times
Been Liked: 185 times

Re: DOMN8N'S EL ghia

Postby markr154 » October 26th, 2013, 12:03 am

Image
Hot Chilli Red EL XR6, 5-spd manual, with BF F6 TYPHOON motor and supporting mod's, 3" exhaust etc etc.
298 rwkw @ 12 psi with re-tune likely.
My car here: http://www.pertheseries.com/forums/inde ... entry84622
NOW BOOSTED ...BF TYPHOON STYLE !!!
User avatar
markr154
Cruising
 
Posts: 428
Joined: December 21st, 2007, 7:50 pm
Has Liked: 2 times
Been Liked: 29 times

Re: DOMN8N'S EL ghia

Postby NUT347 » October 26th, 2013, 5:54 am

What a dick head.
NUT347
Melting Pistons
 
Posts: 7553
Joined: June 22nd, 2008, 7:09 pm
Location: Brisbane
Has Liked: 911 times
Been Liked: 1254 times

Re: DOMN8N'S EL ghia

Postby Sunboost » October 26th, 2013, 7:28 am

YOUNGY09 wrote:my car hangs hoops on a 5 cent coin

Lol. Aussie slang will never cease to entertain me.
Edge FG G6ET 50th Anniversary
Vixen BF F6 R-Spec
User avatar
Sunboost
Moderator
Moderator
 
Posts: 6900
Joined: July 13th, 2007, 11:18 am
Has Liked: 98 times
Been Liked: 471 times

Re: DOMN8N'S EL ghia

Postby misk » October 26th, 2013, 12:23 pm

There's a difference between flow and pressure. If there is not enough pressure the bearing won't support the shaft with oil
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger

soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing

XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities :)
User avatar
misk
Melting Pistons
 
Posts: 10047
Joined: October 14th, 2008, 10:31 am
Location: dandenong
Has Liked: 298 times
Been Liked: 295 times

Re: DOMN8N'S EL ghia

Postby misk » October 26th, 2013, 12:24 pm

There's a difference between flow and pressure. If there is not enough pressure the bearing won't support the shaft with oil
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger

soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing

XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities :)
User avatar
misk
Melting Pistons
 
Posts: 10047
Joined: October 14th, 2008, 10:31 am
Location: dandenong
Has Liked: 298 times
Been Liked: 295 times

Re: DOMN8N'S EL ghia

Postby YOUNGY09 » October 26th, 2013, 8:10 pm

Haha so many judgemental people on here I don't c the point of this forum you guys are no help n just put ya 2 cents in when its not needed!
Yes my Grammar sucks don't need to point it out if I could spell all write better I would I think it's quite low of people to point that out as I could have a disability etc!
Now I'm getting called dickhead Wtf
If this is what this forum is about I'm more then happy to remove myself from it
Like I have said 1 million times I'm not tunning it till its got the new engine n to prove you all wrong my car n setup apart from diff has had no issues! So stop posting shit n saying my turbos probs fucked etc
Also learn ya basics about pressure n flow misk
More flow is more pressure
Yes I understand what you all probs think of me my post are shitty n I would think what a wanker aswell but hay I've spent alot of time money n pride into my car n I'm happy with how it is
Ill do you all a favour and not post on here again all take it to car shows with boosted falcons all attend anything as why would I want to hang around judgemental people who clearly no it all
I came on this page to learn shit and gather info from u all I didn't want to be judged all put down
Before i Go It's a project and ill get it right I'n the end that's all that matters to me!
YOUNGY09
Idling
 
Posts: 169
Joined: November 5th, 2012, 1:42 pm
Has Liked: 5 times
Been Liked: 9 times

1997 Ford Fairmont Ghia

Re: DOMN8N'S EL ghia

Postby misk » October 26th, 2013, 8:41 pm

alright mate, if you think getting oil flow where the oil is taking the path of least resistance is the same as having flow that will sustain under pressure then good on you.

no one has been as bad as you think they are. how nice do you expect people to be to someone that is a cock to an entire forum?
if you didn't need help or care what we think why did you come here?
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger

soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing

XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities :)
User avatar
misk
Melting Pistons
 
Posts: 10047
Joined: October 14th, 2008, 10:31 am
Location: dandenong
Has Liked: 298 times
Been Liked: 295 times

Re: DOMN8N'S EL ghia

Postby SnipeZ » October 26th, 2013, 9:05 pm

It's just like fuel pressure and flow.
Car won't start if there is no pressure. Could have plenty of flow from the pump. But at the end of the day if the reg is fucked and there is no pressure the car will be as useful as shit.

The same as oil. Plenty of flow doesn't mean good pressure where it counts. Being a mechanic I thought it would have been something covered in trade school.


I'm sorry if you think everyone here is treating you like an illiterate noob. But it's hard to argue with when people give you their experiences with things and you just throw it back at them.

How many cars have you turboed? Tuned? Sustained?

Most of the guys on this forum have had so much more experience in this field. They may not be all mechanics but they sure as he'll know what their talking about.

Shit happens. Either move on past it or let yourself drown in it.
Choices.


Cheers
1998 EL XR6 - Stolen
1997 EL Fairmont V8 - Current
5.0 V8
Full Leather
EL GT Headers
2"1/2 Twin System
FPV Dark Argent
Full Tickford Lip Kit
Low :)
Soon To Be Manual
User avatar
SnipeZ
Hitting N2O
 
Posts: 3838
Joined: May 3rd, 2008, 11:49 am
Has Liked: 235 times
Been Liked: 170 times

Re: DOMN8N'S EL ghia

Postby wicksy » October 26th, 2013, 9:08 pm

Nice car but **** you got way too much time on your hands
User avatar
wicksy
Full Boost
 
Posts: 2068
Joined: February 16th, 2008, 9:17 pm
Location: mackay
Has Liked: 137 times
Been Liked: 55 times

Re: DOMN8N'S EL ghia

Postby misk » October 26th, 2013, 9:18 pm

reminds me of a rich 16 year old that gets daddy to fix their mistakes...
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger

soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing

XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities :)
User avatar
misk
Melting Pistons
 
Posts: 10047
Joined: October 14th, 2008, 10:31 am
Location: dandenong
Has Liked: 298 times
Been Liked: 295 times

Re: DOMN8N'S EL ghia

Postby YOUNGY09 » October 26th, 2013, 11:10 pm

What I was meaning for my oil to flow threw the feed line it would need pressure right? It wouldn't flow if there was no pressure?
I said I checked the flow rate of the oil feed if it never had enough pressure I wouldn't have had the right amount of flow so what misk was saying was just because I have flow doesn't mean I have pressure but if my flow was more then enough like it is that would mean I have enough pressure so therefore my turbo is safe n won't blow up
Also misk daddy doesn't fix my mistakes is there really any need for them type of comments?
Your a keyboard warrior, I don't want to battle you!
Also snipez I've turbocharged nothing I just do general servicing on ya average cars but that's why I started this project I wanted to learn more n have a fast car at the same time.
which this forum has helped me learn heaps of stuff and I appreciate the comments n help I have gotten, but its the people who continually say tune it blah,blah.
I'm not tunning it until my new engine end of story! Then I get comments from smart arses saying you can lead a horse to water but the horse doesn't drink? There just smart arses but at the end of the day I let it get to me for some reason, but ae I'm over it I'm happy with how everything's going ATM so that's the main thing so **** da haters,keyboard warriors and smartarses
YOUNGY09
Idling
 
Posts: 169
Joined: November 5th, 2012, 1:42 pm
Has Liked: 5 times
Been Liked: 9 times

1997 Ford Fairmont Ghia

Re: DOMN8N'S EL ghia

Postby Ef_frmnt » October 27th, 2013, 2:00 am

"f*ck da haters..."









Ban.
XD Falcon 427ci - long term drag (in-and-out-of-shed) car project
1992 Ford Courier LS1, big cam, big stall, big nitrous, and soon to be packing a big turbo..
PX MKii Wildtrak 20" Monster wheels with 33x10 tyres, Fox Shocks, custom stereo install, ARB Summit rear bar
User avatar
Ef_frmnt
Full Boost
 
Posts: 2069
Joined: July 24th, 2007, 7:50 pm
Has Liked: 157 times
Been Liked: 257 times

Re: DOMN8N'S EL ghia

Postby 67rce » October 27th, 2013, 6:43 am

YOUNGY09 wrote:Also learn ya basics about pressure n flow misk
More flow is more pressure


So, what has more pressure in this situation: Pouring a litre of water down a straw, or poring a litre of water down a drain pipe? Pressure and flow are two very different things.
Cammed Suzuki Baleno, Haltech PS1000, E85
User avatar
67rce
Breaking Intake Welds
 
Posts: 4073
Joined: October 27th, 2007, 3:39 pm
Location: Brisbane
Has Liked: 170 times
Been Liked: 100 times

Re: DOMN8N'S EL ghia

Postby NUT347 » October 27th, 2013, 9:54 am

The funny part about it is if you tuned it you wouldn't have to replace the engine.

Bets on fits new engine and pops that too.
NUT347
Melting Pistons
 
Posts: 7553
Joined: June 22nd, 2008, 7:09 pm
Location: Brisbane
Has Liked: 911 times
Been Liked: 1254 times

Re: DOMN8N'S EL ghia

Postby Rollin » October 27th, 2013, 11:44 am

Dude, I don't understand what you're saying. One the one hand you're saying nobody offers advice but on the other you're saying everybody puts their 2 cents in?

There are heaps of people giving you advice, you're choosing not to listen to it. We have seen so many others flog their cars without a tune and have to replace motors unnecessarily, we're trying to stop you making the same mistakes others have.

You might find swapping motors fun but it's still a waste of a motor regardless.

Most people on this forum do try and help others as much as possible, because at the end of the day we all want to see reliable boosted falcons making good numbers on the dyno and running good times at the strip.

Also, pressure and flow are different but related - pressure is a measure of resistance to flow.
Image

Look at your car. Now back to mine. Now back to yours. Now back to mine. Sadly, yours isn't mine. But if you stopped buying dodgy cars and bought an ED, yours could be like mine. Look down. Back up. Where are you? ...You're on BoostedFalcon, reading the signature your signature could be like! Anything is possible when your car looks like my car... I'm on a computer.
User avatar
Rollin
Melting Pistons
 
Posts: 7933
Joined: July 15th, 2007, 4:35 pm
Location: Brisbane - Driving around in a metal and glass case of emotion!
Has Liked: 327 times
Been Liked: 751 times

1994 Ford Falcon

Re: DOMN8N'S EL ghia

Postby YOUNGY09 » October 27th, 2013, 1:08 pm

Yeah true I understand that your all trying to help and I do appreciate it
I guess I'm just loosing the plot I've been off work for almost 9weeks now,with a Brocken hand and I've had to live of my savings.
I guess having no money and no brains makes you act stupid haha
The car untuned is running okay but and since fmu my engine bay temps have dropped considerably so I just felt no need to tune it, until I no my situation/financial standings.
I love my car and it will be sorted out soon.
hopefully I'm back at work on the 4th of next month so shit will get done and will get done right.
if I have any promblems I'm sure ill be on hear looking/asking for help
Also with the pressure flow situation I no there different
I checked the flow rate of feed because at the end of the day if I have the correct amount of flow I would have the correct amount of pressure? That's how I sore it anyways
If I didn't have enough flow then there would've been not enough pressure
That's why I said misk was wrong as that's how I sore it!
I apologise for my stupidity and not making sence 99% of the time I will try to improve my grammar and I hope in the future when I post on hear u guys will still offer a hand :)
I can't wait to get it done n run it down the strip :)
My n/a did a 14.5 at Calder with a slipping clutch so Im looking forward to compare the 2 cars
YOUNGY09
Idling
 
Posts: 169
Joined: November 5th, 2012, 1:42 pm
Has Liked: 5 times
Been Liked: 9 times

1997 Ford Fairmont Ghia

Re: DOMN8N'S EL ghia

Postby YOUNGY09 » October 27th, 2013, 1:23 pm

67rce wrote:
YOUNGY09 wrote:Also learn ya basics about pressure n flow misk
More flow is more pressure


So, what has more pressure in this situation: Pouring a litre of water down a straw, or poring a litre of water down a drain pipe? Pressure and flow are two very different things.


The answer is drain pipe lol which is exactly what I was saying more flow = more pressure?
I was checking the flow rate over 15secomds if it didn't flow enough?
it would not have enough pressure there for I have a oil pressure situation all my straw is to restricted!
That's the way I sore it at the time
Atleast I took the time to run a simple test
I could've just gone off my oil pressure gauge,I could've assumed it would be okay but instead I made sure it would be okay :)
YOUNGY09
Idling
 
Posts: 169
Joined: November 5th, 2012, 1:42 pm
Has Liked: 5 times
Been Liked: 9 times

1997 Ford Fairmont Ghia

Re: DOMN8N'S EL ghia

Postby misk » October 27th, 2013, 1:55 pm

Lol ill only reply to what was said to me.

I'm not a keyboard warrior ill happily say anything I do online to someone's face.
I said it reminds me of that situation not that it was you to tee.
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger

soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing

XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities :)
User avatar
misk
Melting Pistons
 
Posts: 10047
Joined: October 14th, 2008, 10:31 am
Location: dandenong
Has Liked: 298 times
Been Liked: 295 times

Re: DOMN8N'S EL ghia

Postby YOUNGY09 » October 29th, 2013, 12:13 pm

Image
Got myself a ef xr6 for a daily :) bloody mint inside n out old guy owned it 200000kms
Get it hopefully by Friday :)
YOUNGY09
Idling
 
Posts: 169
Joined: November 5th, 2012, 1:42 pm
Has Liked: 5 times
Been Liked: 9 times

1997 Ford Fairmont Ghia

Re: DOMN8N'S EL ghia

Postby Dumpsta » October 29th, 2013, 3:07 pm

Can't go wrong with red, just keep it out of the sun. Don't really understand you stating that you have no money and won't get it tuned until you know how you are financially, then you turn around and buy a daily. Don't mistake me for giving a hoot, I'm just sayin.

Look forward to seeing what you make of your turbo build, always loved the car.
User avatar
Dumpsta
Full Boost
 
Posts: 2174
Joined: June 13th, 2008, 6:12 pm
Location: Yeppoon, QLD
Has Liked: 28 times
Been Liked: 68 times

1997 Ford EL

Re: DOMN8N'S EL ghia

Postby YOUNGY09 » October 29th, 2013, 4:26 pm

Yeah fair call Iol
And hopefully I make the most of the turbo build Im trying my best :)
When my setup n engine are complete ill 100% get it tuned
YOUNGY09
Idling
 
Posts: 169
Joined: November 5th, 2012, 1:42 pm
Has Liked: 5 times
Been Liked: 9 times

1997 Ford Fairmont Ghia

Re: DOMN8N'S EL ghia

Postby YOUNGY09 » October 30th, 2013, 6:35 pm

Image
Sold my barina to an old guy his happy with the car
But he said the hi beams were crap so I got him some lights :)
Also a/c wasn't cold enough gave it a regas
I also threw in some darkest legal window tint :)
I can't wait to get the xr6 it's getting the rwc work done n done things fixed should have it tomorrow all Friday arvo :)
YOUNGY09
Idling
 
Posts: 169
Joined: November 5th, 2012, 1:42 pm
Has Liked: 5 times
Been Liked: 9 times

1997 Ford Fairmont Ghia

PreviousNext

Return to The Showroom

Who is online

Users browsing this forum: No registered users