ba xt wagon

Post pics of your rides here

ba xt wagon

Postby JONNYB » January 8th, 2013, 11:04 pm

just got this as an upgrade from a pos lemon vt that cost me over 2 grand (ontop of the 4800 i bought it for) in just a year of owning it.

its just a standard ba xt at the moment but im going to be putting in some lowering blocks soon enough when i go back to work, keeping just the black stocky wheel look at the moment due to having no nicer ford wheels only holden etc etc, ive put all my sound system in and wired it up to the factory headunit because it looks alot nicer then mangling up the factory one and putting in an after market headunit,its got a few little nick here and there im probly not going to do any high performance engine mods because its just a daily and im saving for a 350 block to rebuild for my ute.

ive been a holden person for a long time since having my hq 1tonna as my first car and still owning it but after buying the vt and just constantly spending money on it to keep it on the road then having it blow up, do a diff a fuel pump an engine mount 2 drivers seats a passenger seat 4 tailight globes headlight fuses and about 16 tyres (fucking camber). so thats made me not want to ever buy another commodore its just made me give up on them hahaha!. so here it is. (i hope the pictures upload properly.)


Image


Image


Image


Image


Image
You can have any color. as long as its Black
JONNYB
Cranking Over
 
Posts: 9
Joined: January 8th, 2013, 10:24 pm
Location: melbourne
Has Liked: 0 time
Been Liked: 0 time

Re: ba xt wagon

Postby misk » January 8th, 2013, 11:34 pm

least it looks like the paints in mint condition.
get the suspension sorted and chuck some wheels on it and it'll look nice.
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger

soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing

XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities :)
User avatar
misk
Melting Pistons
 
Posts: 10047
Joined: October 14th, 2008, 10:31 am
Location: dandenong
Has Liked: 298 times
Been Liked: 295 times

Re: ba xt wagon

Postby BROCKYB8 » January 9th, 2013, 8:20 am

looks good mate
welcome
www.cveperformance.com

CARS:
ED XR6 DAILY BANGER - STOCK
EA Brock B8- Stock as a rock back to original t5
Ea Brock 2 4.11 lsd , CVE custom Cam and head , Wolf v500 , Custom Induction setup ,
Custom Built CVE bottom end , 230rwkw - 12.8 @ 111.6mph
EF wagon - Xr6 front - Custom Interior 20's - twin turbo 220RWKW @ 5psi - Memphis sound car .
User avatar
BROCKYB8
Melting Pistons
 
Posts: 7331
Joined: July 26th, 2007, 10:29 am
Has Liked: 73 times
Been Liked: 99 times

1989 Ford Brock

Re: ba xt wagon

Postby Sloxr6 » January 9th, 2013, 12:24 pm

Looks like it is a good base to start with. My wagon is still an XT at heart.
F6 6 Speed Manual Ba Wagon. 320rwkw
User avatar
Sloxr6
Spooling Up
 
Posts: 831
Joined: February 27th, 2009, 11:41 pm
Has Liked: 6 times
Been Liked: 22 times

Re: ba xt wagon

Postby JONNYB » January 11th, 2013, 11:10 pm

thanks guys. thats a nice wagon you got there sloxr6. im saving for some new subs and wheels im looking at i think theyre ba gt mags in an 18.
You can have any color. as long as its Black
JONNYB
Cranking Over
 
Posts: 9
Joined: January 8th, 2013, 10:24 pm
Location: melbourne
Has Liked: 0 time
Been Liked: 0 time

Re: ba xt wagon

Postby Sloxr6 » January 11th, 2013, 11:15 pm

Thanks. Yeah I don't mind the ba gt rims if they are the ones I am thinking of. I have looked at them a few times.
F6 6 Speed Manual Ba Wagon. 320rwkw
User avatar
Sloxr6
Spooling Up
 
Posts: 831
Joined: February 27th, 2009, 11:41 pm
Has Liked: 6 times
Been Liked: 22 times

Re: ba xt wagon

Postby JONNYB » January 17th, 2013, 8:09 pm

Sloxr6 wrote:Thanks. Yeah I don't mind the ba gt rims if they are the ones I am thinking of. I have looked at them a few times.


i tryed to find a pic of them but i couldnt haha.

do you know what size the front door speakers are in the wagons??. coz i want to find out without pulling the skins off first.
You can have any color. as long as its Black
JONNYB
Cranking Over
 
Posts: 9
Joined: January 8th, 2013, 10:24 pm
Location: melbourne
Has Liked: 0 time
Been Liked: 0 time

Re: ba xt wagon

Postby Sloxr6 » January 17th, 2013, 8:28 pm

I haven't taken much notice to be honest. I think they are 5x7's.

These are the rims I am thinking of.

Image
F6 6 Speed Manual Ba Wagon. 320rwkw
User avatar
Sloxr6
Spooling Up
 
Posts: 831
Joined: February 27th, 2009, 11:41 pm
Has Liked: 6 times
Been Liked: 22 times

Re: ba xt wagon

Postby obsezd » January 17th, 2013, 10:21 pm

new set of wheels, moar low and maybe a typhoon front and you'll be laughing :) :drinks2: mint colour aswell
Image

AU XR6 III - D.Corsa Polaris - Ultra Lows All Round -SS Inductions - Pacemaker 4480s - Diffilipo Intake

WTB : LENSO D1R Black with mirror lip or hyper silver!!!!!
User avatar
obsezd
Spooling Up
 
Posts: 505
Joined: March 26th, 2012, 10:54 pm
Location: Rowville/Cranbourne
Has Liked: 32 times
Been Liked: 30 times

Re: ba xt wagon

Postby JONNYB » January 20th, 2013, 3:53 pm

Sloxr6 wrote:I haven't taken much notice to be honest. I think they are 5x7's.

These are the rims I am thinking of.

Image


http://www.gumtree.com.au/s-ad/taylors- ... 1011336705

these are the wheels i meant theyre ba gtp i think
You can have any color. as long as its Black
JONNYB
Cranking Over
 
Posts: 9
Joined: January 8th, 2013, 10:24 pm
Location: melbourne
Has Liked: 0 time
Been Liked: 0 time

Re: ba xt wagon

Postby Sloxr6 » January 20th, 2013, 4:05 pm

Ah yeah there the cobra rims aren't they?
F6 6 Speed Manual Ba Wagon. 320rwkw
User avatar
Sloxr6
Spooling Up
 
Posts: 831
Joined: February 27th, 2009, 11:41 pm
Has Liked: 6 times
Been Liked: 22 times

Re: ba xt wagon

Postby JONNYB » February 7th, 2013, 1:16 pm

Sloxr6 wrote:Ah yeah there the cobra rims aren't they?


yeah i think so but ive gone off them. itryed a mates set of ba gt wheels and they look tuff. theyrelike 5 spokes with a little line in them.

just curious mate but how much was the xr front you put on yours??. coz ive seen them on ebay (not in my color unfortunitly) for around 370.
You can have any color. as long as its Black
JONNYB
Cranking Over
 
Posts: 9
Joined: January 8th, 2013, 10:24 pm
Location: melbourne
Has Liked: 0 time
Been Liked: 0 time

Re: ba xt wagon

Postby Sloxr6 » February 7th, 2013, 2:46 pm

Hey mate nah didn't really cost me anything. I got the front $50 I think and the rest came off a wreck I had. Yeah they aren't normally cheap
F6 6 Speed Manual Ba Wagon. 320rwkw
User avatar
Sloxr6
Spooling Up
 
Posts: 831
Joined: February 27th, 2009, 11:41 pm
Has Liked: 6 times
Been Liked: 22 times

Re: ba xt wagon

Postby JONNYB » February 11th, 2013, 6:29 pm

Sloxr6 wrote:Hey mate nah didn't really cost me anything. I got the front $50 I think and the rest came off a wreck I had. Yeah they aren't normally cheap


ahh ok. well you had a win there then haha
You can have any color. as long as its Black
JONNYB
Cranking Over
 
Posts: 9
Joined: January 8th, 2013, 10:24 pm
Location: melbourne
Has Liked: 0 time
Been Liked: 0 time


Return to The Showroom

Who is online

Users browsing this forum: No registered users