ED XR6 + XF Ute

Post pics of your rides here

ED XR6 + XF Ute

Postby Menice » October 26th, 2014, 11:41 pm

Hey guys, I got this xr6 bout a month ago from another member, and recently sold my daily so threw some rego on the old girl the next day.

Pretty happy with it so far but as you do the same day I got rego I also organised for a motor to be built, nothing over the top for now I'm using a previous head and cam combo I had on my daily Eb manual before I stripped the dizzy gear and fucked the oil pump drive. It's a eb/ed head with oversized valve's, port and polished, was decked 10thou but been shaved couple times now so not sure what it's up to, has crow 2222549 with their xr6 valve springs, the bottom end will be stock au with au steel head gasket.

The day I picked it up
Image
Image
Image
Image
Image
Image

And my 88 XF Ute, this I've had for a few number of years and just never got around to getting it started until earlier this year. It's an ex-show car back from the 90's so every hinge, latch, bolt is chromed. It's running a mild worked 351 Cleveland with a built c4 behind it and yes it's mod plated for it, also has a xw/xy 9inch 4.11 diff, tubbed, ghia interior with custom bench seat. Still have to install radiator and fuel cell but is very close to being drivable

Image
Image
Image
Image
Image
Image

http://youtu.be/y7-StqN-6pA?list=UUDhMP ... TzG9DnNVEA

Custom offset steelies
Image
Image
User avatar
Menice
Idling
 
Posts: 30
Joined: June 11th, 2014, 3:32 pm
Location: Brisbane
Has Liked: 4 times
Been Liked: 4 times

1994 Ford ED Falcon XR6

Re: ED XR6 + XF Ute

Postby EBOOST » October 28th, 2014, 8:02 pm : Menice Likes this post

Nice cars mate and welcome.
Get Stroked!!
AU Stroked 5.6L Ghia.
User avatar
EBOOST
Hitting N2O
 
Posts: 3506
Joined: July 20th, 2007, 12:27 pm
Has Liked: 437 times
Been Liked: 93 times

Re: ED XR6 + XF Ute

Postby NUT347 » October 29th, 2014, 1:12 pm

What happened to the convos?

XF is sick too
NUT347
Melting Pistons
 
Posts: 7553
Joined: June 22nd, 2008, 7:09 pm
Location: Brisbane
Has Liked: 911 times
Been Liked: 1254 times

Re: ED XR6 + XF Ute

Postby Menice » October 29th, 2014, 4:43 pm

Long story but they were sold, and before I could get the backspace. I'll get another set once I work out what will fit
User avatar
Menice
Idling
 
Posts: 30
Joined: June 11th, 2014, 3:32 pm
Location: Brisbane
Has Liked: 4 times
Been Liked: 4 times

1994 Ford ED Falcon XR6

Re: ED XR6 + XF Ute

Postby Menice » November 21st, 2014, 8:51 pm

Update - The new motor has been finished, it's an au series 2-3 block with a modified e series head, bigger valves, Port and polish, crow cam 549 with upgraded springs, adjustable cam gear. I have a polished rocker cover to replace that red one
Image

And some future proofing ;)
Image
User avatar
Menice
Idling
 
Posts: 30
Joined: June 11th, 2014, 3:32 pm
Location: Brisbane
Has Liked: 4 times
Been Liked: 4 times

1994 Ford ED Falcon XR6

Re: ED XR6 + XF Ute

Postby Menice » November 29th, 2014, 9:33 pm

So motor is in and finished with a few small issues to sort out, power steering leaking a little at pump fitting and engine mounts shagged so sump touching box tube bar on k-frame. All really simple fixes and doesn't effect the driving, couple of us went for a cruise last night and she went really well chopped em all (they all got manuals too) except my mechanics car which is crazy does flat 14's with all stock engine parts just shaved head.

So plan now is Monday morning it's going in for dyno tune and then maybe back to mechanics to fix the last few things, once the leak has been fixed we'll be cleaning up engine no point atm lol

Out with the old
Image

In with the new
Image

Nothing special atm but I'll be going through and replacing everything with new stuff and maybe start hiding what wiring I can

Image
User avatar
Menice
Idling
 
Posts: 30
Joined: June 11th, 2014, 3:32 pm
Location: Brisbane
Has Liked: 4 times
Been Liked: 4 times

1994 Ford ED Falcon XR6

Re: ED XR6 + XF Ute

Postby nstg8a » November 29th, 2014, 10:56 pm

Was the engine built, or just a good bottom end with the e series head?
Image
User avatar
nstg8a
Hitting N2O
 
Posts: 3197
Joined: August 4th, 2008, 1:38 pm
Location: Norman Park, Brisbane.
Has Liked: 541 times
Been Liked: 208 times

1999 Ford Fairlane

Re: ED XR6 + XF Ute

Postby Menice » November 29th, 2014, 11:16 pm

Just a low km good solid bottom end, originally had another motor organised but turned out to be series 1. This series 2-3 one has better crank and girdle
User avatar
Menice
Idling
 
Posts: 30
Joined: June 11th, 2014, 3:32 pm
Location: Brisbane
Has Liked: 4 times
Been Liked: 4 times

1994 Ford ED Falcon XR6

Re: ED XR6 + XF Ute

Postby nstg8a » November 30th, 2014, 9:44 am

And that was done by hca?

I'm looking at getting back into a xf, and if I do then the crossy has to go lol. 100kw and the fuel,economy of an 8 is no good.
Image
User avatar
nstg8a
Hitting N2O
 
Posts: 3197
Joined: August 4th, 2008, 1:38 pm
Location: Norman Park, Brisbane.
Has Liked: 541 times
Been Liked: 208 times

1999 Ford Fairlane

Re: ED XR6 + XF Ute

Postby Menice » November 30th, 2014, 10:16 am

Yeah all done at hca but he's actually closing shop around Christmas but may be building motors still in his spare time he's not 100% what he wants to do yet, I'm one of the last
User avatar
Menice
Idling
 
Posts: 30
Joined: June 11th, 2014, 3:32 pm
Location: Brisbane
Has Liked: 4 times
Been Liked: 4 times

1994 Ford ED Falcon XR6

Re: ED XR6 + XF Ute

Postby nstg8a » November 30th, 2014, 10:48 am

Menice wrote:Yeah all done at hca but he's actually closing shop around Christmas but may be building motors still in his spare time he's not 100% what he wants to do yet, I'm one of the last

Why is he closing? Just had enough, or not enough business?
Image
User avatar
nstg8a
Hitting N2O
 
Posts: 3197
Joined: August 4th, 2008, 1:38 pm
Location: Norman Park, Brisbane.
Has Liked: 541 times
Been Liked: 208 times

1999 Ford Fairlane

Re: ED XR6 + XF Ute

Postby Menice » November 30th, 2014, 11:26 am : nstg8a Likes this post

Just over it, chasing people for money would get annoying lol
User avatar
Menice
Idling
 
Posts: 30
Joined: June 11th, 2014, 3:32 pm
Location: Brisbane
Has Liked: 4 times
Been Liked: 4 times

1994 Ford ED Falcon XR6

Re: ED XR6 + XF Ute

Postby Menice » December 1st, 2014, 5:33 pm : Bipolar Likes this post

Dyno tune happened today by Luke at phantom performance and dyno tuning at Mutdapilly QLD, first time he'd tuned using a j3 chip lol brought my laptop with everything he needed and got to work.

Took a little while to wrap his head around the tables as they were similar but backwards to what he's used to but in the end we got there with a health 211.3hp and 300Nm atw

Reppin the mc racing wheels lol
Image
User avatar
Menice
Idling
 
Posts: 30
Joined: June 11th, 2014, 3:32 pm
Location: Brisbane
Has Liked: 4 times
Been Liked: 4 times

1994 Ford ED Falcon XR6

Re: ED XR6 + XF Ute

Postby Menice » December 20th, 2014, 11:26 pm : 1990eafalcon Likes this post

Went to willowbank raceway for the last test and tune for the year, got pretty consistent results throughout but this was my best for the night. It will not stall any higher than 2k so I'm shit outta luck getting better launches

Someone more experienced might know but I feel there could be a 14 in it judging by the mph

Image
User avatar
Menice
Idling
 
Posts: 30
Joined: June 11th, 2014, 3:32 pm
Location: Brisbane
Has Liked: 4 times
Been Liked: 4 times

1994 Ford ED Falcon XR6

Re: ED XR6 + XF Ute

Postby Menice » December 29th, 2014, 6:22 pm

Not so much as an update but i got my hands on this today, its a Holset HX40W everything looks good and no shaft play I expect this to last a while considering they come of diesel's doing 40psi all day...
Image
Image
Image

what its getting used as till i get all the other goodies
Image

and just a clean pic i got randomly
Image
User avatar
Menice
Idling
 
Posts: 30
Joined: June 11th, 2014, 3:32 pm
Location: Brisbane
Has Liked: 4 times
Been Liked: 4 times

1994 Ford ED Falcon XR6

Re: ED XR6 + XF Ute

Postby TUFEF » December 30th, 2014, 9:00 am

looks cool. :good: I like the mc wheels I want them... Haha
(TUFEF) 96 Ef Fairmont Ghia, Turbo+ Screamer pipe= Daily Fun
User avatar
TUFEF
Idling
 
Posts: 196
Joined: October 13th, 2007, 7:56 pm
Location: melbourne
Has Liked: 2 times
Been Liked: 20 times

Re: ED XR6 + XF Ute

Postby Menice » January 3rd, 2015, 8:27 pm

ok so i may still be buying things for this even though i'm meant to be finishing the ute haha i can't help myself... The latest purchase is a tech edge 2J9 wideband with the LX1 display, a GM Delco 2-Bar MAP sensor and the usb serial cable to connect to a laptop for logging. Seeing as i already use a J3 chip for tuning the current motor and i have the burner and software to allow me to load a tune to the J3 chip i figure rather than giving someone else money to tune why not just do it myself, well thats my reason for it seems reasonably enough lol and if i get good i may be able to make a few bucks on the side tuning other cars with a j3
User avatar
Menice
Idling
 
Posts: 30
Joined: June 11th, 2014, 3:32 pm
Location: Brisbane
Has Liked: 4 times
Been Liked: 4 times

1994 Ford ED Falcon XR6

Re: ED XR6 + XF Ute

Postby Menice » January 10th, 2015, 10:48 pm

Was pretty excited to get home today and get started on this wideband controller, not much to say but show some pics

Controller and sensor
Image

Display test fit
Image

Wired up and tested, all works [GRINNING FACE WITH SMILING EYES]
Image

And the fun part wiring
Image
Image
Image
Image
Image

Still need to wire up MAP Sensor but ran outta light will do it tomorrow
User avatar
Menice
Idling
 
Posts: 30
Joined: June 11th, 2014, 3:32 pm
Location: Brisbane
Has Liked: 4 times
Been Liked: 4 times

1994 Ford ED Falcon XR6

Re: ED XR6 + XF Ute

Postby Menice » January 11th, 2015, 11:43 pm : galapogos01 Likes this post

Wideband controller all done, software is all setup and working. Had a good play around with it today learning the in's and out's, I've got a nice tune in it now but I've gotten my hands on another tune file with a few more options to help me out will have to start from scratch when I get the time.

The dashboard with all the doobywackers
Image

And my before and after
Image
Image

And with all this extra power i decided to weight it down cause you know traction and all that
Image
User avatar
Menice
Idling
 
Posts: 30
Joined: June 11th, 2014, 3:32 pm
Location: Brisbane
Has Liked: 4 times
Been Liked: 4 times

1994 Ford ED Falcon XR6

Re: ED XR6 + XF Ute

Postby sxr6eb2 » May 4th, 2015, 6:41 pm

Hey mate how did go wiring up the map sensor?
sxr6eb2
Cranking Over
 
Posts: 5
Joined: September 10th, 2014, 7:30 pm
Has Liked: 0 time
Been Liked: 0 time

Re: ED XR6 + XF Ute

Postby sxr6eb2 » May 4th, 2015, 6:41 pm

Hey mate how did go wiring up the map sensor?
sxr6eb2
Cranking Over
 
Posts: 5
Joined: September 10th, 2014, 7:30 pm
Has Liked: 0 time
Been Liked: 0 time

Re: ED XR6 + XF Ute

Postby Menice » May 4th, 2015, 6:46 pm

Did you wanna know how to wire it in?
User avatar
Menice
Idling
 
Posts: 30
Joined: June 11th, 2014, 3:32 pm
Location: Brisbane
Has Liked: 4 times
Been Liked: 4 times

1994 Ford ED Falcon XR6

Re: ED XR6 + XF Ute

Postby sikwags_218 » May 5th, 2015, 6:44 pm

How's the car going mate?
Project car: Turbo ED build- Barra swapped, 60lb dekkas, 400lph walbro, turbo side intake, big cooler, el gt brakes, locked 4.11s, btr'd, smoothed engine bay, sunroof, fairmont GHIA interior. Chasing 10 sec quaters!
User avatar
sikwags_218
Breaking Traction
 
Posts: 1290
Joined: October 30th, 2010, 9:01 am
Location: Horsham Victoria
Has Liked: 95 times
Been Liked: 30 times

Re: ED XR6 + XF Ute

Postby Menice » May 5th, 2015, 6:45 pm

Not good lol

Image
User avatar
Menice
Idling
 
Posts: 30
Joined: June 11th, 2014, 3:32 pm
Location: Brisbane
Has Liked: 4 times
Been Liked: 4 times

1994 Ford ED Falcon XR6

Re: ED XR6 + XF Ute

Postby Menice » May 5th, 2015, 9:18 pm

had heaps done since i put anything up, but she's now a write-off and i'm looking for another daily...
User avatar
Menice
Idling
 
Posts: 30
Joined: June 11th, 2014, 3:32 pm
Location: Brisbane
Has Liked: 4 times
Been Liked: 4 times

1994 Ford ED Falcon XR6

Re: ED XR6 + XF Ute

Postby sikwags_218 » May 5th, 2015, 10:01 pm

Shit no good
What happened
Project car: Turbo ED build- Barra swapped, 60lb dekkas, 400lph walbro, turbo side intake, big cooler, el gt brakes, locked 4.11s, btr'd, smoothed engine bay, sunroof, fairmont GHIA interior. Chasing 10 sec quaters!
User avatar
sikwags_218
Breaking Traction
 
Posts: 1290
Joined: October 30th, 2010, 9:01 am
Location: Horsham Victoria
Has Liked: 95 times
Been Liked: 30 times

Re: ED XR6 + XF Ute

Postby Menice » May 5th, 2015, 10:26 pm

caressed the rear end of a VE :glare:
User avatar
Menice
Idling
 
Posts: 30
Joined: June 11th, 2014, 3:32 pm
Location: Brisbane
Has Liked: 4 times
Been Liked: 4 times

1994 Ford ED Falcon XR6


Return to The Showroom

Who is online

Users browsing this forum: No registered users