Page 1 of 2
Barnsy's EDition

Posted:
April 10th, 2008, 3:35 pm
by Barnsy
Model: ED Futura Classic
Color: Poly Green
Year: 1994
Trans: Stock Manual
Power: Hopefully 150+rwkw
Interior ModsEB 1 Fairmont Ghia Interior
AU Centre Console & Gear Boot
Trip Computer
Upgraded Loud Stereo
Custom Shortened Shifter
Footwell Courtesy Lights
Tinted Windows
Exterior ModsSpeedy Raven 16" rims
USC Side Skirts
Color Coded Door Molds
Front & Rear 3/4 Bar Brock Kit
EB GT Rear Spoiler
EB GT Bonnet Vents
Fairmont Rear Garnish
Red 4.0L Badges
Clear Indicators
Clear Repeaters
Under the bonnetRebuilt Engine:
Rebore Block & Hone to Size
Deck Block
Balance Bottom End
AU Head Gasket
Headwork
Wade 1673 Cam
Pacemaker 4499s, Hi Flow Cat & 2.5" Exhaust
Duel Fuel
LG B2 Converter
Impco 225 Mixer
XH Snorkal
EF Thermos
XR6/V8 Dual Diaphragm Brake Booster
DrivelineExcedy Clutch
3.27 LSD
Kmac Camber Kit
SL Rear Springs
Low's Front Springs







Re: Barnsy's EDition

Posted:
April 10th, 2008, 3:50 pm
by travs ea-xr6
its nice as but i reckon all it needs is a ea grill i reckon that would make the front nice and mean

Re: Barnsy's EDition

Posted:
April 10th, 2008, 3:52 pm
by Barnsy
I was thinking of a SVO grill to go with the EB GT Scoops
Re: Barnsy's EDition

Posted:
April 10th, 2008, 3:55 pm
by travs ea-xr6
i reckon u should leave the bonet humps and vents off looks alot cleaner i reckon

Re: Barnsy's EDition

Posted:
April 10th, 2008, 3:57 pm
by travs ea-xr6
have you thought about supper lows that would set it off

Re: Barnsy's EDition

Posted:
April 10th, 2008, 4:07 pm
by Barnsy
I'd love to get it lower, but I have trouble around geelong with the car scraping everywhere
here is some old pics side on


Re: Barnsy's EDition

Posted:
April 10th, 2008, 4:16 pm
by travs ea-xr6
mad, where do you get the e series stickers from

Re: Barnsy's EDition

Posted:
April 10th, 2008, 4:20 pm
by makvaiielles_xr6
nice looking car....DONT change bonnet tho
Re: Barnsy's EDition

Posted:
April 10th, 2008, 4:42 pm
by 4LEDboy
Poly green looks sexeh clean, Hard to keep it clean tho

Re: Barnsy's EDition

Posted:
April 10th, 2008, 4:48 pm
by holmsy
Barnsy wrote:I'd love to get it lower, but I have trouble around geelong with the car scraping everywhere
here is some old pics side on
sissy. im on supers and the only places i scrape is gordon tafe speed humps and town maccas drive through.
and wayne is on ultras in a lane.
get that car on supers now biatch
Re: Barnsy's EDition

Posted:
April 10th, 2008, 4:53 pm
by Barnsy
holmsy wrote:sissy. im on supers and the only places i scrape is gordon tafe speed humps and town maccas drive through.
and wayne is on ultras in a lane.
get that car on supers now biatch
macca's drive thru in Geelong cbd is shocking as well as safeway on shannon ave exiting on aberdeen st
I just have to fill the petrol & gas tank up and I have ultra lows on the back

Re: Barnsy's EDition

Posted:
April 10th, 2008, 5:21 pm
by holmsy
yeh safeway newtown is gay. i no longer work there but now its my local so im there all the time anyway.
but i just exit and enter on shannon avenue.
Re: Barnsy's EDition

Posted:
April 15th, 2008, 7:22 pm
by holmsy
hey man. can ya get me a pic of ya shifter.
au gear boot wont fit over my shifter

will be getting a new shifter when i get round to it.
is yours au one?
Re: Barnsy's EDition

Posted:
April 17th, 2008, 9:00 am
by Barnsy
Yeah its a AU one, I will try and get a pic up soon
Re: Barnsy's EDition

Posted:
May 12th, 2008, 2:26 pm
by shane-ed
hey, your car looks nice as..
where did you get the front body kit from it looks sick as?
Re: Barnsy's EDition

Posted:
May 12th, 2008, 2:30 pm
by Alesia
love the eb 1 ghia seats

Re: Barnsy's EDition

Posted:
May 12th, 2008, 5:26 pm
by Barnsy
Shane-ed: I picked up the body kit from the wreckers for $100, worth $660 new! can buy them from here
http://www.awcinfo.com/secureshop/categ ... ?cat_id=85Alesia: I prefer the EB1 Ghia interior better, I found out the hard way they are rarer than the EB2/ED ones especially in good nic
cheers
Barnsy
Re: Barnsy's EDition

Posted:
May 13th, 2008, 11:43 am
by shane-ed
Barnsy wrote:Shane-ed: I picked up the body kit from the wreckers for $100, worth $660 new! can buy them from here
http://www.awcinfo.com/secureshop/categ ... ?cat_id=85Alesia: I prefer the EB1 Ghia interior better, I found out the hard way they are rarer than the EB2/ED ones especially in good nic
cheers
Barnsy
that would have been a good find..
lol
Re: Barnsy's EDition

Posted:
May 13th, 2008, 3:06 pm
by shane-ed
when u got the kit did it come with the paint?
because i still want it like that plastic grey on the top and the burgandy on the bottom with the silver strip.
Re: Barnsy's EDition

Posted:
May 13th, 2008, 3:11 pm
by misseseries
haha speaking of low n scraping at maccas in geelong....pantics capri almost got stuck LMAO
Re: Barnsy's EDition

Posted:
May 13th, 2008, 3:13 pm
by Barnsy
The kit was white when i got it, had an embarrassing attempt at trying to match the color myself.
IMHO eseries look better with color coded bumpers and mouldings, but each to their own
cheers
Barnsy
Re: Barnsy's EDition

Posted:
May 13th, 2008, 3:17 pm
by Barnsy
misseseries wrote:haha speaking of low n scraping at maccas in geelong....pantics capri almost got stuck LMAO
haha everybody loves maccas carparks.
The speed humps in the free carpark at Deakin Uni (Waurn Ponds) are not much better
Re: Barnsy's EDition

Posted:
May 13th, 2008, 5:38 pm
by nothin suss
misseseries wrote:haha speaking of low n scraping at maccas in geelong....pantics capri almost got stuck LMAO
I havn't been to Maccas CBD for 4 years because of my last and previous cars

Hungry Jacks Belmont, Grovedale bottleshop, Waurn Ponds bottle shop, KFC NthGeelong are all in the same category.
I think i have lost 10kg due to this!
Any updates on the beast Barnsy?
Re: Barnsy's EDition

Posted:
May 15th, 2008, 11:44 am
by Barnsy
nothin suss wrote:Any updates on the beast Barnsy?
I'm going to advance the cam next week, try and get some more power/torque down lower in the rev range, it currently sitting at -2 and will move it to +4.
For what got done to the engine it should be pulling higher figures, and I can only narrow it down to the cam timing at this stage.rol!
Other than that waiting until tax time to do the following
BBM conversion with EL ECU
Full respray.....still deciding on a color
Convert car to straight gas with a 425 mixer with custom intake.....

Re: Barnsy's EDition

Posted:
May 20th, 2008, 7:10 pm
by Barnsy
Finally got my cam advanced......torque about power down low

!
I am very surprised a cam adjustment can make such a difference, still to reset ecu and relearn the timing adjustments
Re: Barnsy's EDition

Posted:
May 26th, 2008, 8:11 pm
by Dump3D
just woundering could you put a pik up of the interior liken the AU console
would like to see what it looks like
thanks

Re: Barnsy's EDition

Posted:
May 26th, 2008, 8:49 pm
by Barnsy
Sorry haven't taken any recent photos, will take some in the coming days.
Here's one of the back seat

Re: Barnsy's EDition

Posted:
May 26th, 2008, 9:39 pm
by Commando
Re: Barnsy's EDition

Posted:
May 26th, 2008, 9:43 pm
by Kyle the ED4LTR
this car is awesome in person, he took me for a spin when I had to get double sided tape for the side moulds he sold me, i will tell u one thing, that car has balls.
Re: Barnsy's EDition

Posted:
May 26th, 2008, 9:52 pm
by holmsy
ey. another 2 of mine with seat in.


au console was definatly a good mod to do. and easy as. with a manual or an auto. iv done both now

Re: Barnsy's EDition

Posted:
May 26th, 2008, 9:54 pm
by Commando
that's what she said
Re: Barnsy's EDition

Posted:
May 27th, 2008, 8:09 am
by Dump3D
wicked as man thanks
Re: Barnsy's EDition

Posted:
May 28th, 2008, 5:01 pm
by Barnsy
I would appreciate this thread kept to my car etc, and Josh if you want Dump3D to see pics of your car you could of PM'd him....end of rant
Barnsy
Re: Barnsy's EDition

Posted:
June 6th, 2008, 1:18 pm
by Barnsy
Here is a recent pic......until tax time then new tread!

Re: Barnsy's EDition

Posted:
June 6th, 2008, 5:41 pm
by nothin suss
Barnsy wrote:Here is a recent pic......until tax time then new tread!
Ah, i mis-read this. I thought after tax time you were starting a new THREAD. Im thinking sweet, 393 cu inch stroker or something

Looking clean nowadays buddy, the red badges look good. Like the 'stolen' look too...
Re: Barnsy's EDition

Posted:
June 6th, 2008, 5:53 pm
by holmsy
nah needs to be on its ass to pull off the stolen look

not a fan.
get chopped ultras man.

Re: Barnsy's EDition

Posted:
July 27th, 2008, 8:14 pm
by Barnsy
holmsy wrote:nah needs to be on its ass to pull off the stolen look

not a fan.
get chopped ultras man.

the rear end has been dropped on its ass tonight with help from schmee, the car ride alot better without cut springs!
Will post pics up shortly
Re: Barnsy's EDition

Posted:
July 27th, 2008, 8:38 pm
by purped
mate i like the au console idea what series concole is it ?
Re: Barnsy's EDition

Posted:
July 27th, 2008, 8:42 pm
by Barnsy
I am under the impression that all AU consoles are the same except the lids (leather in fairmonts).
The console I have in mine is a Ghia one with XR/futura console lid
Re: Barnsy's EDition

Posted:
October 22nd, 2008, 8:31 pm
by Barnsy
Its been a while...things done since
I have installed a BA shifter and gear knob
Brought new tread Toyo Proxes 4 (225/50/R16) GREAT TYRE well worth $170 a corner
Green AU rocker cover off dedicated gas vehicle
and have a set of 4499 pacies to go on her
will post a few pic on the weekend