Page 1 of 1

My Eb Turbo In The Build

PostPosted: December 16th, 2008, 8:37 pm
by tolow
Hello everyone my names mark im new on boosted falcons so still tryin work out how to use it hope use like my car Its a Ford Eb S Pack With An El Xr6 Head And a turbo kit im aiming 4 about 270rwkw at the moment it has been tuned to 229.8 rwkw but the one of the boost lines poped that has now been fixed. Jeff From Snort performance has been the brains behide this car and Mahamed from fawkner brake and clutch...




ENGINE

EL XR6 Tickford Head
Ported And Flowed
Crow Cam Valve Springs
Mild Crow Cam
Full 3 Inch Custom Turbo Exhaust Turbo Cat
Full Custom S/Steel Tuned Length Turbo Manifold
50mm External Wastegate
Garrett gt40 Turbocharger (Rated Over 650hp)
Super Billet b.o.v (Not Fitted Yet)
BA XR6 Turbo Injectors
Boost Reference Fuel Regulator
Bosch 203 Intank Fuel Pump
Front Mount Intercooler (Size 600x300x76)
3 inch S/Steel Dump Pipe With o2 Sensor Bung
3 inch Custom Made turbo Exhaust
2 inch S/Steel Screamer Pipe (From Wastegate)
Teflon Braided Oil Feed Lines, Vclamps, Oil Sender t
Teflon Oil Drain Lines Gaskets And Fittings
4 inch Pod Intake Pipe & Pod Filter
Oil Catch Can
Heat shield
SMT Piggy Back Computer

TRANSMISSION

Rebuilt Tranny
Stage 2 Shift Kit
2500 Dominator High Stall Converter

DIFF

Rebuilt Lsd
2.3.5 El XR6 Diff Gears


Image
My EB S Pack

Image
Garrett GT40

Image
Front Mount

Image
Cooler Piping On Left Side

Image
Cooler Piping On Right Side

Image

Image

Image

Image

Image

Image

Image
Front mount Tucked Behind Front Bar

Re: My Eb Turbo In The Build

PostPosted: December 16th, 2008, 8:43 pm
by tolow
hello guys how do i put photos on my page

Re: My Eb Turbo In The Build

PostPosted: December 16th, 2008, 9:01 pm
by purped

Re: My Eb Turbo In The Build

PostPosted: December 16th, 2008, 9:17 pm
by tolow
ok thenk bro doin it now

Re: My Eb Turbo In The Build

PostPosted: December 16th, 2008, 9:41 pm
by SNR
Nice cooler piping!

A different take on that again I think - should flow pretty well and be practically invisible

you going to paint the cooler black?

Re: My Eb Turbo In The Build

PostPosted: December 16th, 2008, 9:43 pm
by tolow
yer it comin up good bro
yer the flow pretty good to and na il put a pic up with the front bar on u dnt realy see the cooler

Re: My Eb Turbo In The Build

PostPosted: December 16th, 2008, 10:36 pm
by travs ea-xr6
look greate mate,so is it up and running,and is it just running a stock ecu

Re: My Eb Turbo In The Build

PostPosted: December 17th, 2008, 6:08 pm
by DFEKTV
CAR LOOKS GOOD MATE WISH MY COOLER WAS HIDDEN LIKE THAT.SLEEPER

Re: My Eb Turbo In The Build

PostPosted: December 17th, 2008, 6:14 pm
by DOHC-EB
Nice looking build you have there. Be sure to keep us all updated

Re: My Eb Turbo In The Build

PostPosted: December 17th, 2008, 6:45 pm
by donno
That cooler mounting is brilliant! How big is the piping on the hot side at the IC? 2.5" I presume? Did you have to get custom AC lines made up?

Re: My Eb Turbo In The Build

PostPosted: December 17th, 2008, 6:47 pm
by EFFalcon
Nice setup.
looks very tidy!

Re: My Eb Turbo In The Build

PostPosted: December 17th, 2008, 6:54 pm
by Malakai
Yes I had heard about this car. I tried to do the cooler piping like that on my car but the air-con pipes were already relocated by the good people at AIT and it just so happens that they put them in exactly the wrong place for me to be able to do the cooler upside-down like that. The hot side entry is right where my drier is for the air-con. I love it though, well done.

My guess is that the air-con is ditched altogether, I can see the disconnected pipe above the cooler. Is it going to stay that way?

Re: My Eb Turbo In The Build

PostPosted: December 17th, 2008, 7:01 pm
by XR6TIM
Tough as dude looks awesome...

Re: My Eb Turbo In The Build

PostPosted: December 17th, 2008, 7:45 pm
by donno
Malakai wrote:My guess is that the air-con is ditched altogether, I can see the disconnected pipe above the cooler. Is it going to stay that way?


Right you are. I didn't even notice that - I thought he found a way to keep the condensor in behind and fit a cooler in front. None the less, that piping is still mint.

Re: My Eb Turbo In The Build

PostPosted: December 18th, 2008, 9:11 pm
by tolow
im still workin on the a/c gotta get it dun soon all they do is get flexibul hose and relokate in the engin bay

Re: My Eb Turbo In The Build

PostPosted: December 18th, 2008, 10:19 pm
by travs ea-xr6
i remember seeing this car forsale in the trading post i think years ago :)

Re: My Eb Turbo In The Build

PostPosted: December 19th, 2008, 8:57 pm
by tolow
yer bro it was in the trading post about a year and a half ago but now looks heapz diff and gose had as ffff now lol

Re: My Eb Turbo In The Build

PostPosted: December 20th, 2008, 11:07 pm
by EdXr666
mate this thing is excellent wat a sleeper :D wish i had have donethis to my eb wen i had it

Re: My Eb Turbo In The Build

PostPosted: December 21st, 2008, 9:36 am
by huggiebear
donno wrote:
Malakai wrote:I thought he found a way to keep the condensor in behind and fit a cooler in front.


there is... its called a fairlane lol. have you seen the room behind my front bar? you could queeze a 10 year old behind it and still close the bonnet. (no jokes)

i love the sleeper look, but id spray the cooler black so its more stealth

Re: My Eb Turbo In The Build

PostPosted: December 21st, 2008, 9:56 am
by tolow
dose anyone no any good tuner to do a good final tune

Re: My Eb Turbo In The Build

PostPosted: December 21st, 2008, 11:39 am
by SNR
The cooler from dan's setup cleared the condenser, but I never got time to have new lines made up and to fit an EF/L drier otherwise I could have had A/C in the EA

Re: My Eb Turbo In The Build

PostPosted: December 21st, 2008, 5:15 pm
by pHaT`eL
Sweet lookin ride mate. Were you on AFF with the username loweb? Car looks familar thats all.

Re: My Eb Turbo In The Build

PostPosted: December 30th, 2008, 9:02 am
by fierce-ea
cooler... fkn mad....

Re: My Eb Turbo In The Build

PostPosted: December 30th, 2008, 12:05 pm
by LUXO_8
pHaT`eL wrote:Sweet lookin ride mate. Were you on AFF with the username loweb? Car looks familar thats all.

i have a feeling its the same car but im 99% certain the guy that had it on AFF sold it and bought a VS stato

Re: My Eb Turbo In The Build

PostPosted: January 23rd, 2009, 8:19 am
by fierce-ea
hey, whats the bottom black lip that u have on the front bumper?? what car 's it off?

Re: My Eb Turbo In The Build

PostPosted: January 23rd, 2009, 9:18 am
by travs ea-xr6
fierce-ea wrote:hey, whats the bottom black lip that u have on the front bumper?? what car 's it off?


the front little black lip on the front bumper is just your standered s pack lip,my es s pack has one

Re: My Eb Turbo In The Build

PostPosted: January 23rd, 2009, 1:47 pm
by fierce-ea
i want one! anyone whos got one, ill buy.
thanx

Re: My Eb Turbo In The Build

PostPosted: January 23rd, 2009, 1:51 pm
by travs ea-xr6
haha just go to the wreckers it will cost f... all ;) $5 $10 bucks

Re: My Eb Turbo In The Build

PostPosted: January 23rd, 2009, 2:16 pm
by huggiebear
i got one... throwing it out soon. free to anyone who can pick it up

Re: My Eb Turbo In The Build

PostPosted: January 24th, 2009, 1:22 am
by fierce-ea
huggie, ill pass on the wreckers at $5. Ill fly to Brisy from Melb and pick it up for free.. haha