'93 R32 GTS-T drifter

Post pics of your rides here
Post Reply
User avatar
Tocchi
Cruising
Posts: 359
Joined: October 17th, 2007, 4:48 pm
Location: Perth

'93 R32 GTS-T drifter

Post by Tocchi »

this is the replacement for HMAS FG ... since retired from drift duties

I got it with a stock 25 turbo manifold & turbo, instead of the previous setup which made 385rwhp on 1 bar ... (6 boost manifold, 50mm trust gate, gt3582 turbo, and bigger dump-pipe)
the cost was $4k less with the stock turbo/manifold ... which suited me perfectly, because I picked a full GT3082 kit the day after :P


1993 GTS-T

engine hardware:
R34 RB25 Neo motor
stock turbo & manifold
genuine GReddy inlet manifold
R33 Power FC computer
Nismo 740cc injectors
Sard fuel regulator
VH45 V8 throttle body
Koyo Racing aliminium radiator
600x300x75 intercooler
3 inch stainless piping
300zx afm
Blitz bov


drive line:
HKS twin plate
R33 RB25 gearbox
single peice tailshaft
GTR diff with Tomei 2 way centre
GTR axles and hubs
R32 GTR brakes
Tein caster rods
Cusco rear camber arms
hicas lock bar
Buddy Club racing coilovers


body wise:
D Max vented carbon bonnet
D Max 35mm wide rear guards
genuine GTR fenders
genuine GTR front bar
GTR corner lights
carbon GTR rear boot lip
WRX WRC blue paint


interior:
Bride fixed back seat
Monkey Warehouse floor brace
rest of interior removed


how it is now
Image

'old' turbo setup
Image

when Nic owned/drove it :)
Image

Image

Image
FG XR8 -- [RU 16 WA]
Simmons FR19s, Brembo 6 pot [f] 4 pot [r], 5% tint, Malwood 'Option 3+' clutch, Tein coilovers + EDFC, Whiteline adjustable swaybars, GTE bootlid spoiler, 2x Bride Zeta 3 fixed back seats, Volk TE37 track rims

EF XR6 Turbo -- SOLD

1971 Capri
shitty Garrett T51, pathetic fuel system (dash 10 earl fittings and lines, Prostar 750s x 2, 2433cc Siemens injectors, Process West fuel rail).
Atomic Chrome Moly Flexplate ... built powerglide transbrake etc
quite embarrasingly shit
Top
User avatar
Tocchi
Cruising
Posts: 359
Joined: October 17th, 2007, 4:48 pm
Location: Perth

Re: '93 R32 GTS-T drifter

Post by Tocchi »

ok, as per usual tocchi spec, I eat my words rather quickly due to boredom or just nothing better to during the day.

so ive sourced parts already for it, but its keeping the stock turbo and manifold on for now :) I believe Nic is sending it off to hyperdrive for a quick tune (for the stock turbo, manifold)
ill put the bigger turbo on in the November 'break' (2 comps in october, none in November)

Garrett GT3082 (0.7 front, 0.82 rear)
high mount steampipe manifold
Turbonetics 38mm wastegate (18psi spring)
screamer pipe
3.5" dump pipe


Image


went to change rims .... then noticed it had a type of wheel nuts that I didnt have a key for ... so I gotta go buy one :p
but the (black) R34 GTR rims will now live on it.


car as it is now :)
Image

Image


engine bay (for now)
Image


"interior" haha
Image

Image
FG XR8 -- [RU 16 WA]
Simmons FR19s, Brembo 6 pot [f] 4 pot [r], 5% tint, Malwood 'Option 3+' clutch, Tein coilovers + EDFC, Whiteline adjustable swaybars, GTE bootlid spoiler, 2x Bride Zeta 3 fixed back seats, Volk TE37 track rims

EF XR6 Turbo -- SOLD

1971 Capri
shitty Garrett T51, pathetic fuel system (dash 10 earl fittings and lines, Prostar 750s x 2, 2433cc Siemens injectors, Process West fuel rail).
Atomic Chrome Moly Flexplate ... built powerglide transbrake etc
quite embarrasingly shit
Top
User avatar
Tocchi
Cruising
Posts: 359
Joined: October 17th, 2007, 4:48 pm
Location: Perth

Re: '93 R32 GTS-T drifter

Post by Tocchi »

now with the R34 GTR rims. and also bought a set of 17" P1s in bronze :)


Image

Image

Image


this is a video from when the the previous owner had it.
http://www.facebook.com/video/video.php ... 061&ref=mf" onclick="window.open(this.href);return false;
FG XR8 -- [RU 16 WA]
Simmons FR19s, Brembo 6 pot [f] 4 pot [r], 5% tint, Malwood 'Option 3+' clutch, Tein coilovers + EDFC, Whiteline adjustable swaybars, GTE bootlid spoiler, 2x Bride Zeta 3 fixed back seats, Volk TE37 track rims

EF XR6 Turbo -- SOLD

1971 Capri
shitty Garrett T51, pathetic fuel system (dash 10 earl fittings and lines, Prostar 750s x 2, 2433cc Siemens injectors, Process West fuel rail).
Atomic Chrome Moly Flexplate ... built powerglide transbrake etc
quite embarrasingly shit
Top
User avatar
nstg8a
Hitting N2O
Posts: 3197
Joined: August 4th, 2008, 1:38 pm
Location: Norman Park, Brisbane.

Re: '93 R32 GTS-T drifter

Post by nstg8a »

thats awesome, looks good on the r34's too..

so drift pig only? no rego?
Image
Top
User avatar
Tocchi
Cruising
Posts: 359
Joined: October 17th, 2007, 4:48 pm
Location: Perth

Re: '93 R32 GTS-T drifter

Post by Tocchi »

yeh track only. no rego. will never pass the pits. haha
FG XR8 -- [RU 16 WA]
Simmons FR19s, Brembo 6 pot [f] 4 pot [r], 5% tint, Malwood 'Option 3+' clutch, Tein coilovers + EDFC, Whiteline adjustable swaybars, GTE bootlid spoiler, 2x Bride Zeta 3 fixed back seats, Volk TE37 track rims

EF XR6 Turbo -- SOLD

1971 Capri
shitty Garrett T51, pathetic fuel system (dash 10 earl fittings and lines, Prostar 750s x 2, 2433cc Siemens injectors, Process West fuel rail).
Atomic Chrome Moly Flexplate ... built powerglide transbrake etc
quite embarrasingly shit
Top
User avatar
Gozza
Hitting N2O
Posts: 3609
Joined: August 10th, 2007, 11:31 am
Location: Brisbane

Re: '93 R32 GTS-T drifter

Post by Gozza »

cool as man. fucking love it
Its a stack of f*ck shit, on top of itself niggaaaaaa
Top
User avatar
ned
Spooling Up
Posts: 983
Joined: July 14th, 2007, 7:09 pm
Location: Geelong

Re: '93 R32 GTS-T drifter

Post by ned »

**** yeah, i just went to oran park last weekend to watch the SD/DA drifts. some hardcore inspiration right there.
too many sickcunts, not enough hospitals...
Top
User avatar
BROCKYB8
Melting Pistons
Posts: 7331
Joined: July 26th, 2007, 10:29 am

Re: '93 R32 GTS-T drifter

Post by BROCKYB8 »

GOtta love a drift pigs
there are few of these coming over from japan at the moment i have noticed .
Cant wait to see you drifiting them.
www.cveperformance.com

CARS:
ED XR6 DAILY BANGER - STOCK
EA Brock B8- Stock as a rock back to original t5
Ea Brock 2 4.11 lsd , CVE custom Cam and head , Wolf v500 , Custom Induction setup ,
Custom Built CVE bottom end , 230rwkw - 12.8 @ 111.6mph
EF wagon - Xr6 front - Custom Interior 20's - twin turbo 220RWKW @ 5psi - Memphis sound car .
Top
User avatar
Gozza
Hitting N2O
Posts: 3609
Joined: August 10th, 2007, 11:31 am
Location: Brisbane

Re: '93 R32 GTS-T drifter

Post by Gozza »

do you know if they were delivered over night?
Its a stack of f*ck shit, on top of itself niggaaaaaa
Top
User avatar
Dansedgli
Melting Pistons
Posts: 9734
Joined: July 13th, 2007, 11:35 am
Location: Melbourne

Re: '93 R32 GTS-T drifter

Post by Dansedgli »

Skylines from japan? No wai!! :D

I wish I had room for all the toys you have. Do you have a massive garage?

Pics?
Top
User avatar
Tocchi
Cruising
Posts: 359
Joined: October 17th, 2007, 4:48 pm
Location: Perth

Re: '93 R32 GTS-T drifter

Post by Tocchi »

i have one. lol well 2
a 2 car garage, massive shed, and 3 car garage on the other side
FG XR8 -- [RU 16 WA]
Simmons FR19s, Brembo 6 pot [f] 4 pot [r], 5% tint, Malwood 'Option 3+' clutch, Tein coilovers + EDFC, Whiteline adjustable swaybars, GTE bootlid spoiler, 2x Bride Zeta 3 fixed back seats, Volk TE37 track rims

EF XR6 Turbo -- SOLD

1971 Capri
shitty Garrett T51, pathetic fuel system (dash 10 earl fittings and lines, Prostar 750s x 2, 2433cc Siemens injectors, Process West fuel rail).
Atomic Chrome Moly Flexplate ... built powerglide transbrake etc
quite embarrasingly shit
Top
M1CH437
Cruising
Posts: 363
Joined: February 18th, 2009, 5:12 pm
Location: Melbourne

Re: '93 R32 GTS-T drifter

Post by M1CH437 »

The car looks tough as!
name's actually Michael. Image
Top
User avatar
Tocchi
Cruising
Posts: 359
Joined: October 17th, 2007, 4:48 pm
Location: Perth

Re: '93 R32 GTS-T drifter

Post by Tocchi »

ok wrap up from Round 1

the good:
- was my first time out in the car (apart from a lap around my block, not hitting boost), and I had an absolute blast :)
- car went better than I expected :)
- got better as the day went on

the bad:
- my worst session of the day was the qualifying session :(
- the HKS twin plate is slipping chronic... hell weird... bled it today (got heaps of air out), but it still slips (gentle acceleration slips at 1500rpm, hard acceleration it free revs)



some pics
Image

Image

Image

Image

Image

Image



but lucky me, halfway through dropping the gearbox (replacing the HKS twin plate, with an OS Giken triple plate), I decide to get sick as a dog. headaches and vomitting. woooo !


found another sweet photo from the comp.

Image
FG XR8 -- [RU 16 WA]
Simmons FR19s, Brembo 6 pot [f] 4 pot [r], 5% tint, Malwood 'Option 3+' clutch, Tein coilovers + EDFC, Whiteline adjustable swaybars, GTE bootlid spoiler, 2x Bride Zeta 3 fixed back seats, Volk TE37 track rims

EF XR6 Turbo -- SOLD

1971 Capri
shitty Garrett T51, pathetic fuel system (dash 10 earl fittings and lines, Prostar 750s x 2, 2433cc Siemens injectors, Process West fuel rail).
Atomic Chrome Moly Flexplate ... built powerglide transbrake etc
quite embarrasingly shit
Top
User avatar
Dansedgli
Melting Pistons
Posts: 9734
Joined: July 13th, 2007, 11:35 am
Location: Melbourne

Re: '93 R32 GTS-T drifter

Post by Dansedgli »

Looks like a fun day out.
Top
User avatar
private9
Hitting N2O
Posts: 3388
Joined: August 13th, 2007, 7:58 pm
Location: Not in the diner Alf, not in the diner...
Contact:
Contact private9

Re: '93 R32 GTS-T drifter

Post by private9 »

Awesome! Did you actually pull it back around in that last pic :D
Image
Top
User avatar
Tocchi
Cruising
Posts: 359
Joined: October 17th, 2007, 4:48 pm
Location: Perth

Re: '93 R32 GTS-T drifter

Post by Tocchi »

i think i spun... unsure though. haha
FG XR8 -- [RU 16 WA]
Simmons FR19s, Brembo 6 pot [f] 4 pot [r], 5% tint, Malwood 'Option 3+' clutch, Tein coilovers + EDFC, Whiteline adjustable swaybars, GTE bootlid spoiler, 2x Bride Zeta 3 fixed back seats, Volk TE37 track rims

EF XR6 Turbo -- SOLD

1971 Capri
shitty Garrett T51, pathetic fuel system (dash 10 earl fittings and lines, Prostar 750s x 2, 2433cc Siemens injectors, Process West fuel rail).
Atomic Chrome Moly Flexplate ... built powerglide transbrake etc
quite embarrasingly shit
Top
User avatar
SnyperEB
Shooting Flames
Posts: 6901
Joined: July 13th, 2007, 5:14 pm
Location: E-Series Owners Club

Re: '93 R32 GTS-T drifter

Post by SnyperEB »

Im gathering the front bar was ripped off pulling you out of the sand.
[EBGLT]
Top
User avatar
Tocchi
Cruising
Posts: 359
Joined: October 17th, 2007, 4:48 pm
Location: Perth

Re: '93 R32 GTS-T drifter

Post by Tocchi »

yeh, the cable ties broke... cable tied on, for easy removal :)
FG XR8 -- [RU 16 WA]
Simmons FR19s, Brembo 6 pot [f] 4 pot [r], 5% tint, Malwood 'Option 3+' clutch, Tein coilovers + EDFC, Whiteline adjustable swaybars, GTE bootlid spoiler, 2x Bride Zeta 3 fixed back seats, Volk TE37 track rims

EF XR6 Turbo -- SOLD

1971 Capri
shitty Garrett T51, pathetic fuel system (dash 10 earl fittings and lines, Prostar 750s x 2, 2433cc Siemens injectors, Process West fuel rail).
Atomic Chrome Moly Flexplate ... built powerglide transbrake etc
quite embarrasingly shit
Top
User avatar
KR1STO
Full Boost
Posts: 2817
Joined: August 21st, 2008, 4:16 pm
Location: Pakistan

Re: '93 R32 GTS-T drifter

Post by KR1STO »

nice mate....
looks awesome..

the R32 is my favourite skyline...
Image
Desire isn't driven by the heart, the mind or the wallet. Desire comes from another place. It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night...
Top
Post Reply

Return to “The Showroom”