ftg auto salvage

This is a general discussion forum, open to all participants

Re: ftg auto salvage

Postby t1MMy » March 17th, 2010, 10:26 am

ClassicAU wrote:
Sundeep wrote:I forecast dero XT/GLi spec parts only, with a large chance of punch ons over dibs on motors and other parts.


Oh, the hell yeah. It's the SE suburbs, you people punch on if the wind changes, imagine the brawls that are going to take place! I wouldn't go down there if they gave me $50 to take their shit. Good luck with that.

Says the guy who lives in Reservoir...
User avatar
t1MMy
Full Boost
 
Posts: 2977
Joined: June 29th, 2008, 11:11 pm
Location: Melbourne
Has Liked: 30 times
Been Liked: 45 times

1995 Ford XR6

Re: ftg auto salvage

Postby ClassicAU » March 17th, 2010, 10:39 am

Eh, I haven't been stabbed yet, and I used to have to wait at the train station at 5:45am for a while too! No matter, looks likely I will be moving in the next couple of months anyway. To the true west saayyyeeedd, Hoppers represent! :cool:
3C Volkswagen Passat 130TDi Highline Special Model - Candy White, 17's, DSG, Bi-Xenon lights, Euro lux!

*laughs maniacally* “I can do burnouts every day for the rest of my life and I'd never get sick of it! They're always awesome!” - Mike Musto
ClassicAU
Hitting N2O
 
Posts: 3217
Joined: May 6th, 2008, 4:32 pm
Location: Cheltenham, Melbourne
Has Liked: 34 times
Been Liked: 109 times

Re: ftg auto salvage

Postby Phillis » March 17th, 2010, 12:21 pm

sunny- look at the size of pick a part up canterbury rd and the size of ftg auto salvage.
'94 EF XR6 Wagon- Build Thread here

pHaT`eL wrote:Editing posts never really gets old :)

I have a tiny tiny penis.
User avatar
Phillis
Breaking Traction
 
Posts: 1863
Joined: August 10th, 2008, 3:37 pm
Location: Croydon, Melbourne
Has Liked: 3 times
Been Liked: 18 times

Re: ftg auto salvage

Postby holmsy » March 17th, 2010, 10:38 pm

sean if ya do go. check out that el xr8 :P
top radiator hose is like $150 new and i need one.
Project: SLOXR8: 1994 EF XR8, mech shift kit, 3500 histall, Lokka, 36lb injectors, AU 185 motor, Cranecam 444225, crane roller rockers, crow valve springs, Pacies, 3" exhaust, hiflo cats. twin 044's, vortech v2,microtech tuned by daltons (290.3rwkw @11psi) at DALTONS
Image
User avatar
holmsy
Shooting Flames
 
Posts: 6473
Joined: August 2nd, 2007, 11:07 pm
Location: Geelong
Has Liked: 182 times
Been Liked: 154 times

1994 Ford XR8

Re: ftg auto salvage

Postby misk » March 17th, 2010, 10:49 pm

lol @ tv crews at pick a part
thatd be sick
i remember when jollys had a similar sale
suggestions of buying a bonnet then jamming shit ontop and getting 3 mates to help carry were listed in the add lol

the shit thing is, its not like $1 entry, $49 purchase fee.
its $50 entry, you then have a chance of finding something you need
its good for them making money, bad publicity.
they probly would have made more money if they opened the yard and charged pick a part prices for items and left everything there lol
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger

soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing

XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities :)
User avatar
misk
Melting Pistons
 
Posts: 10047
Joined: October 14th, 2008, 10:31 am
Location: dandenong
Has Liked: 298 times
Been Liked: 295 times

Re: ftg auto salvage

Postby iliov » March 17th, 2010, 10:53 pm

misk wrote:lol @ tv crews at pick a part
thatd be sick
i remember when jollys had a similar sale
suggestions of buying a bonnet then jamming shit ontop and getting 3 mates to help carry were listed in the add lol

the shit thing is, its not like $1 entry, $49 purchase fee.
its $50 entry, you then have a chance of finding something you need
its good for them making money, bad publicity.
they probly would have made more money if they opened the yard and charged pick a part prices for items and left everything there lol


Dude u can go there tomorrow and have a walk around the add said. Go in there tmoz. See if anything is good. Then go back sat 9am....
Image
User avatar
iliov
Cruising
 
Posts: 445
Joined: June 6th, 2008, 8:37 pm
Location: SE Melbourne
Has Liked: 9 times
Been Liked: 0 time

Re: ftg auto salvage

Postby misk » March 17th, 2010, 10:59 pm

which for me is 2 trips, which for alot of people, they wouldnt be able to make due to work n shit anyway.
it will be interesting to see what comes of it.
they're obviously trying to turn a negative into a positive, but going by what people have been saying about turning up, i rekn a $1 (even $10) entry fee then a flat rate purchase fee if you buy anything would have been a mad idea.
i would have made the trip over there for that.
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger

soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing

XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities :)
User avatar
misk
Melting Pistons
 
Posts: 10047
Joined: October 14th, 2008, 10:31 am
Location: dandenong
Has Liked: 298 times
Been Liked: 295 times

Re: ftg auto salvage

Postby iliov » March 17th, 2010, 11:11 pm

Didnt realise you live in coburg.

But yer i live just round the corner so im gonna pop in tomorrow morning. Doubt there will be anything good.
Image
User avatar
iliov
Cruising
 
Posts: 445
Joined: June 6th, 2008, 8:37 pm
Location: SE Melbourne
Has Liked: 9 times
Been Liked: 0 time

Re: ftg auto salvage

Postby misk » March 17th, 2010, 11:22 pm

i guess they can only handle a certain amount of people through the yard anyway, im sure they will get plenty of people through
all the best for people that are going :)
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger

soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing

XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities :)
User avatar
misk
Melting Pistons
 
Posts: 10047
Joined: October 14th, 2008, 10:31 am
Location: dandenong
Has Liked: 298 times
Been Liked: 295 times

Re: ftg auto salvage

Postby LTDHO » March 18th, 2010, 6:46 am

Anyone that goes, take a camera and post up heaps of pic's of everything they are selling.
Image
Going of the rails on a crazy train
User avatar
LTDHO
Full Boost
 
Posts: 2527
Joined: July 15th, 2007, 10:02 pm
Location: Carrum Downs, Victoria
Has Liked: 20 times
Been Liked: 36 times

Re: ftg auto salvage

Postby iliov » March 18th, 2010, 6:10 pm

Went there today, Best thing I saw was NL Fairlane full leather cappa interior. Was fucked though, must have been sitting out there for ages. Oh also 1 AU xr6 vct motor. No ba motors or parts. Only one Ba Shell.

Rest of the stuff was all GLI stuff. Nothing of value really.
Image
User avatar
iliov
Cruising
 
Posts: 445
Joined: June 6th, 2008, 8:37 pm
Location: SE Melbourne
Has Liked: 9 times
Been Liked: 0 time

Re: ftg auto salvage

Postby KR1STO » March 18th, 2010, 8:56 pm

went there today for a look as well..
really not much of value..
good if you need a whole bunch of little parts though..
Image
Desire isn't driven by the heart, the mind or the wallet. Desire comes from another place. It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night...
User avatar
KR1STO
Full Boost
 
Posts: 2817
Joined: August 21st, 2008, 4:16 pm
Location: Pakistan
Has Liked: 4 times
Been Liked: 25 times

1999 Ford Fairlane

Re: ftg auto salvage

Postby OZBMX » March 18th, 2010, 9:14 pm

hahaha, **** litttle makeup ketchupsounding like jus a publicity stunt which suck, wacol up aer des 49$ days on most public holidays , which isn't bad, it's a cheap wrecker, but it's not like a reall bg fucka round, hell i got a leather inter fairlane bumerclusterindowswitchbankand oth shiat once. fucken rules, I just used my mate like a donkey and used ratchet straps to load him up another time we walked out with a 345lsd. :lol:
callinin sick, callin in twisted, they insisted.
**** that that I call in drunk and stoned.
beats passing out at work.
User avatar
OZBMX
Cruising
 
Posts: 454
Joined: February 10th, 2010, 6:06 am
Location: under a bottle in hillcrest
Has Liked: 0 time
Been Liked: 9 times

Re: ftg auto salvage

Postby [Sterling] » March 18th, 2010, 9:56 pm

What?
2005 MK2 XR6Turbo-Leather-6speed manual-duel zone~weekender.
2011 Holden Colorado LXR-duel cab-Turbo Deisel~work rig/tow car
Boosted B-Series FTW E-Series GTFO.
User avatar
[Sterling]
Double Clutching
 
Posts: 5701
Joined: November 27th, 2007, 8:25 pm
Location: Im In Miami Trick!! a.k.a Chirnside park
Has Liked: 176 times
Been Liked: 189 times

1980 Ford XR6

Re: ftg auto salvage

Postby Kyle the ED4LTR » March 18th, 2010, 9:56 pm

[Sterling] wrote:What?


Was thinking the same thing.........
Image
'95 DFII LTD - The Daily
302 Windsor, AU XR8 MAF, Exhaust, Sunroof, Slammed on Pedders, DL LTD Rims, FBT Steering Wheel, EL XR8 3.45LSD
---
'13 Chrysler 300 SRT8
Phantom Black, Black Chrome Group, Radar Red Leather, Dual Panoramic Sunroof, Mopar CAI. Mopar Front Strut Brace
User avatar
Kyle the ED4LTR
Full Boost
 
Posts: 2907
Joined: January 15th, 2008, 10:21 am
Location: Croydon, Victoria
Has Liked: 110 times
Been Liked: 7 times

1994 Ford Falcon

Re: ftg auto salvage

Postby misk » March 18th, 2010, 10:04 pm

i think hes saying a wrecker up near him does $49 sales also, once he used a pack donkey and found his mate there, the donkey rode like a leather seat.
then it was 3:45 when the LSD wore off.

kinda sounds like something from fear and loathing in las vegas lol
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger

soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing

XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities :)
User avatar
misk
Melting Pistons
 
Posts: 10047
Joined: October 14th, 2008, 10:31 am
Location: dandenong
Has Liked: 298 times
Been Liked: 295 times

Re: ftg auto salvage

Postby Mr. CVE » March 18th, 2010, 11:05 pm

OZBMX wrote:hahaha, **** litttle makeup ketchupsounding like jus a publicity stunt which suck, wacol up aer des 49$ days on most public holidays , which isn't bad, it's a cheap wrecker, but it's not like a reall bg fucka round, hell i got a leather inter fairlane bumerclusterindowswitchbankand oth shiat once. fucken rules, I just used my mate like a donkey and used ratchet straps to load him up another time we walked out with a 345lsd. :lol:


Huh ?
oh wait, let me put my hat on backwards and get in my commodore with the seat wound back... oh yes I understand now :rotfl:
CVE Performance, Now tuning E Series ecus !!
http://www.cveperformance.com
User avatar
Mr. CVE
Breaking Traction
 
Posts: 1922
Joined: July 23rd, 2007, 8:07 pm
Has Liked: 49 times
Been Liked: 188 times

Re: ftg auto salvage

Postby Commando » March 19th, 2010, 7:19 am

then it was 3:45 when the LSD wore off.


:rotfl:
Previous: 1982 XE GL 3.3: 5 speed | 1991 EB Ghia 5.0: Vortech, Tiptronic, 4.11s, 232rwkw | 1995 EF GLi 4.0 wagon: LPG | 2006 BF Fairmont 4.0: JTG LiLPG
Now: 2016 Hilux SR HiRider
User avatar
Commando
Moderator
Moderator
 
Posts: 11559
Joined: July 13th, 2007, 12:08 pm
Location: Stradbrokeback
Has Liked: 110 times
Been Liked: 516 times

2006 Ford Fairmont

Re: ftg auto salvage

Postby ClassicAU » March 19th, 2010, 8:06 am

I think somebody blew the meet with Matsui! :lol:
3C Volkswagen Passat 130TDi Highline Special Model - Candy White, 17's, DSG, Bi-Xenon lights, Euro lux!

*laughs maniacally* “I can do burnouts every day for the rest of my life and I'd never get sick of it! They're always awesome!” - Mike Musto
ClassicAU
Hitting N2O
 
Posts: 3217
Joined: May 6th, 2008, 4:32 pm
Location: Cheltenham, Melbourne
Has Liked: 34 times
Been Liked: 109 times

Re: ftg auto salvage

Postby grego » March 19th, 2010, 11:14 am

Mr. CVE wrote:
OZBMX wrote:hahaha, **** litttle makeup ketchupsounding like jus a publicity stunt which suck, wacol up aer des 49$ days on most public holidays , which isn't bad, it's a cheap wrecker, but it's not like a reall bg fucka round, hell i got a leather inter fairlane bumerclusterindowswitchbankand oth shiat once. fucken rules, I just used my mate like a donkey and used ratchet straps to load him up another time we walked out with a 345lsd. :lol:


Huh ?
oh wait, let me put my hat on backwards and get in my commodore with the seat wound back... oh yes I understand now :rotfl:



HAHAHAHAHAHA
grego
Cruising
 
Posts: 212
Joined: January 17th, 2010, 8:10 pm
Has Liked: 0 time
Been Liked: 0 time

Re: ftg auto salvage

Postby misk » March 19th, 2010, 11:44 am

i would be inclined to believe he may have been drunk or just lazy at the time of typing lol
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger

soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing

XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities :)
User avatar
misk
Melting Pistons
 
Posts: 10047
Joined: October 14th, 2008, 10:31 am
Location: dandenong
Has Liked: 298 times
Been Liked: 295 times

Re: ftg auto salvage

Postby 67rce » March 19th, 2010, 12:06 pm

misk wrote:i think hes saying a wrecker up near him does $49 sales also, once he used a pack donkey and found his mate there, the donkey rode like a leather seat.
then it was 3:45 when the LSD wore off.

kinda sounds like something from fear and loathing in las vegas lol

:rotfl: :rotfl: :rotfl: :lol: :lol: :clapping: :clapping: :clapping:
Cammed Suzuki Baleno, Haltech PS1000, E85
User avatar
67rce
Breaking Intake Welds
 
Posts: 4073
Joined: October 27th, 2007, 3:39 pm
Location: Brisbane
Has Liked: 170 times
Been Liked: 100 times

Re: ftg auto salvage

Postby Phillis » March 19th, 2010, 3:55 pm

misk wrote:i think hes saying a wrecker up near him does $49 sales also, once he used a pack donkey and found his mate there, the donkey rode like a leather seat.
then it was 3:45 when the LSD wore off.

kinda sounds like something from fear and loathing in las vegas lol


that is the funniest thing ive read on this forum in a while
'94 EF XR6 Wagon- Build Thread here

pHaT`eL wrote:Editing posts never really gets old :)

I have a tiny tiny penis.
User avatar
Phillis
Breaking Traction
 
Posts: 1863
Joined: August 10th, 2008, 3:37 pm
Location: Croydon, Melbourne
Has Liked: 3 times
Been Liked: 18 times

Re: ftg auto salvage

Postby josh_ef » March 19th, 2010, 6:51 pm

yeah had a look today

mostly crap there, i saw the fairlane, was pretty adverage and ya would struggle to get it in a wheel barrow!
josh_ef
Breaking Traction
 
Posts: 1985
Joined: January 15th, 2010, 1:41 am
Has Liked: 50 times
Been Liked: 20 times

Re: ftg auto salvage

Postby misk » March 19th, 2010, 11:19 pm

Phillis wrote:
misk wrote:i think hes saying a wrecker up near him does $49 sales also, once he used a pack donkey and found his mate there, the donkey rode like a leather seat.
then it was 3:45 when the LSD wore off.

kinda sounds like something from fear and loathing in las vegas lol


that is the funniest thing ive read on this forum in a while


lol its merely speculation...
sorry i've been talking shit more often, its fun taking the piss when i dont have anything constructive to add :hug:

hell, i know i wouldnt mind a donkey that rode like a leather seat, would proly be cheaper than a falcon to buy, service and run
in many ways they are already very similar to a ghia spec falcon*...
firm support for a wide ass, plenty of leg room, internally heated seating, seamless natural leather, unpredictable climate control, and will run on a diet of carrots




*opinion may be biased due to my incredible attraction to Donkeys
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger

soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing

XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities :)
User avatar
misk
Melting Pistons
 
Posts: 10047
Joined: October 14th, 2008, 10:31 am
Location: dandenong
Has Liked: 298 times
Been Liked: 295 times

Re: ftg auto salvage

Postby LOW_XR » March 20th, 2010, 8:44 am

OZBMX wrote:hahaha, **** litttle makeup ketchupsounding like jus a publicity stunt which suck, wacol up aer des 49$ days on most public holidays , which isn't bad, it's a cheap wrecker, but it's not like a reall bg fucka round, hell i got a leather inter fairlane bumerclusterindowswitchbankand oth shiat once. fucken rules, I just used my mate like a donkey and used ratchet straps to load him up another time we walked out with a 345lsd. :lol:



smoke crack much????

seriously was there any ba utes? with white body moulds?
CHRYSLER 300c SRT-8

6.1 LT HEMI
Procharger + intercooler
MagnaFlow stainless Exhaust
debadged
Black leather
4 pot brembos all round
20" wheels
sunroof
tint
touch screen dvd player , sat nav, ipod etc etc
chrome grip grille
+ more
User avatar
LOW_XR
Hitting N2O
 
Posts: 3009
Joined: October 7th, 2007, 6:13 pm
Location: boronia
Has Liked: 5 times
Been Liked: 212 times

2007 HSV Maloo R8

Re: ftg auto salvage

Postby effaircon » March 20th, 2010, 10:32 am

well went down to ftg this morning. scored a complete ba motor, genuine BA XR8 side skirts, el ecu and ba shifter and console. all for $120.

cheers corey
1994 ED FAIRMONT: 3:45:1 Diff Gears and LSD, Clive Cams 605 Billet, Crow Double Valve Springs, Rollmaster Vernier Gear, Medium Ported & Polished EL Head, AU Steel Head Gasket, Pacemaker 4499's, XH Snorkel, K&N Filter, Custom 3" Air Intake, EL Thermos 2 1/2 Cat Back Exhaust, Smoothed Black Rocker Cover, Turbo Blades, Chopped Rears Standard Fronts, J3 Chip & EL ECU Untuned Atm
effaircon
Cruising
 
Posts: 481
Joined: June 20th, 2008, 8:52 pm
Location: Boronia vic
Has Liked: 7 times
Been Liked: 2 times

1994 Ford Fairmont

Re: ftg auto salvage

Postby Kyle the ED4LTR » March 20th, 2010, 11:40 am

$100 got me a complete EL Fairmont Ghia Dash, Tweeters, Center console, Carpeted Kickpanels and a heaterbox, shit ive been chasing for a while.
Image
'95 DFII LTD - The Daily
302 Windsor, AU XR8 MAF, Exhaust, Sunroof, Slammed on Pedders, DL LTD Rims, FBT Steering Wheel, EL XR8 3.45LSD
---
'13 Chrysler 300 SRT8
Phantom Black, Black Chrome Group, Radar Red Leather, Dual Panoramic Sunroof, Mopar CAI. Mopar Front Strut Brace
User avatar
Kyle the ED4LTR
Full Boost
 
Posts: 2907
Joined: January 15th, 2008, 10:21 am
Location: Croydon, Victoria
Has Liked: 110 times
Been Liked: 7 times

1994 Ford Falcon

Re: ftg auto salvage

Postby XR_Lightning » March 20th, 2010, 12:50 pm

OZBMX wrote:hahaha, **** litttle makeup ketchupsounding like jus a publicity stunt which suck, wacol up aer des 49$ days on most public holidays , which isn't bad, it's a cheap wrecker, but it's not like a reall bg fucka round, hell i got a leather inter fairlane bumerclusterindowswitchbankand oth shiat once. fucken rules, I just used my mate like a donkey and used ratchet straps to load him up another time we walked out with a 345lsd. :lol:


bwwwhahahahahahaha!!! :lol:
ED XR6 - T5 - 1521a@112 - 3.9's - 170.2rwkw - POWERED BY METALLICA
User avatar
XR_Lightning
Hitting N2O
 
Posts: 3716
Joined: July 23rd, 2007, 6:48 pm
Location: Dandenong North
Has Liked: 1076 times
Been Liked: 487 times

1993 Ford ED Falcon XR6

Re: ftg auto salvage

Postby LTDHO » March 20th, 2010, 1:47 pm

Kyle the ED4LTR wrote:$100 got me a complete EL Fairmont Ghia Dash, Tweeters, Center console, Carpeted Kickpanels and a heaterbox, shit ive been chasing for a while.

I laughed seeing you with all that stuff in ya hands....

I got about $200 of bits for my $50.

One guy got all the EL ECU's

The would be nothing there now. If ya haven't been, don't bother.
Image
Going of the rails on a crazy train
User avatar
LTDHO
Full Boost
 
Posts: 2527
Joined: July 15th, 2007, 10:02 pm
Location: Carrum Downs, Victoria
Has Liked: 20 times
Been Liked: 36 times

Re: ftg auto salvage

Postby ronza » March 20th, 2010, 2:43 pm

How long before all this gear hits the for sale section on the forums lol...
R U FORDS
WRECKING E SERIES & AU FORDS ... PM ME FOR PARTS!!!

HAPPY CUSTOMER & PROUD SUPPLIER OF PARTS TO KEVS PERFORMANCE WAREHOUSE !!!
User avatar
ronza
Breaking Traction
 
Posts: 1789
Joined: January 3rd, 2008, 11:51 pm
Location: Pearcedale Vic
Has Liked: 24 times
Been Liked: 18 times

Postby EFFalcon » March 20th, 2010, 3:13 pm

or more likely ebay.
User avatar
EFFalcon
Site Admin
Site Admin
 
Posts: 14797
Joined: June 4th, 2007, 8:26 pm
Location: Carrum Downs
Has Liked: 26 times
Been Liked: 766 times

1995 Ford Falcon

Re: ftg auto salvage

Postby LTDHO » March 20th, 2010, 4:02 pm

ronza wrote:How long before all this gear hits the for sale section on the forums lol...

Wouldn't want to get in the way of all your F/S threads!!

I'd say a lot of stuff will end up on ebay, the people I spoke to buy their stuff to use.
Image
Going of the rails on a crazy train
User avatar
LTDHO
Full Boost
 
Posts: 2527
Joined: July 15th, 2007, 10:02 pm
Location: Carrum Downs, Victoria
Has Liked: 20 times
Been Liked: 36 times

Re: ftg auto salvage

Postby misk » March 20th, 2010, 4:50 pm

lol so wait, this $50 all you can carry sale still had further fees ontop for things like engines?
sounds like a few people managed to score some bargains
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger

soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing

XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities :)
User avatar
misk
Melting Pistons
 
Posts: 10047
Joined: October 14th, 2008, 10:31 am
Location: dandenong
Has Liked: 298 times
Been Liked: 295 times

Re: ftg auto salvage

Postby iliov » March 20th, 2010, 5:53 pm

effaircon wrote:well went down to ftg this morning. scored a complete ba motor, genuine BA XR8 side skirts, el ecu and ba shifter and console. all for $120.

cheers corey


You are a fucking liar. There was no BA motors there.
Image
User avatar
iliov
Cruising
 
Posts: 445
Joined: June 6th, 2008, 8:37 pm
Location: SE Melbourne
Has Liked: 9 times
Been Liked: 0 time

Re: ftg auto salvage

Postby misk » March 20th, 2010, 5:54 pm

lol maybe not after he had gone through the yard...
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger

soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing

XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities :)
User avatar
misk
Melting Pistons
 
Posts: 10047
Joined: October 14th, 2008, 10:31 am
Location: dandenong
Has Liked: 298 times
Been Liked: 295 times

Re: ftg auto salvage

Postby waghoonEF » March 20th, 2010, 5:54 pm

any pics or fights???
User avatar
waghoonEF
Spooling Up
 
Posts: 584
Joined: August 13th, 2008, 10:31 pm
Location: Rosebud VIC
Has Liked: 1 time
Been Liked: 12 times

Re: ftg auto salvage

Postby iliov » March 20th, 2010, 6:15 pm

i went on friday for a look misk. no b series engines for sure.
Image
User avatar
iliov
Cruising
 
Posts: 445
Joined: June 6th, 2008, 8:37 pm
Location: SE Melbourne
Has Liked: 9 times
Been Liked: 0 time

Re: ftg auto salvage

Postby misk » March 20th, 2010, 6:25 pm

effaircon wrote:well went down to ftg this morning. scored a complete ba starter motor, genuine BA XR8 side skirts, el ecu and ba shifter and console. all for $120.

cheers corey


fixed :D
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger

soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing

XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities :)
User avatar
misk
Melting Pistons
 
Posts: 10047
Joined: October 14th, 2008, 10:31 am
Location: dandenong
Has Liked: 298 times
Been Liked: 295 times

Re: ftg auto salvage

Postby [Sterling] » March 20th, 2010, 6:47 pm

misk wrote:lol so wait, this $50 all you can carry sale still had further fees ontop for things like engines?
sounds like a few people managed to score some bargains

id say 120 was 2 people and bloke to help him move the shit?
2005 MK2 XR6Turbo-Leather-6speed manual-duel zone~weekender.
2011 Holden Colorado LXR-duel cab-Turbo Deisel~work rig/tow car
Boosted B-Series FTW E-Series GTFO.
User avatar
[Sterling]
Double Clutching
 
Posts: 5701
Joined: November 27th, 2007, 8:25 pm
Location: Im In Miami Trick!! a.k.a Chirnside park
Has Liked: 176 times
Been Liked: 189 times

1980 Ford XR6

PreviousNext

Return to General Discussion

Who is online

Users browsing this forum: No registered users

cron