El Fairmonster Ghia

obsezd · Post by **obsezd** » September 30th, 2012, 6:56 pm

they're the sides, the bumper moulds are in good nic

SnipeZ · Post by **SnipeZ** » September 30th, 2012, 6:59 pm

Yeah they only had 12mm pin stripe. The thickness of the genuine ones are like 20mm and wrap around.

The bumpers are good so only did the doors. Just gotta reinstall it. I'll use some silicone inteckon

Cheers

Ef_frmnt · Post by **Ef_frmnt** » September 30th, 2012, 7:00 pm

Ah yeah bumpers are much harder to renew.. the rear needs a thin tape, (not a moulding like these are) and the front needs a thick mould.

SnipeZ · Post by **SnipeZ** » November 8th, 2012, 7:33 am

Lil update. Bought a t5 off josh_ef that wasn't selecting first gear.
So I got it back to work and pulled it down. Sure enough the synchro slide thing was only moving one way. So a spray of brake cleaner and a bit of tapping with a dead blow hammer i had it in first. Then out and back in etc etc. still going to pull the main shaft down and clean all bearings and synchros. Just need to buy a new clutch and cable and im in business.

Does any one have any info on what I need to do to the transmission computer to get it to work without the auto?

Cheers

LUVSIT · Post by **LUVSIT** » November 8th, 2012, 8:19 am

has the saas tape lasted? I find it didnt last to long.
But found wheel arch mouldings at super cheap auto and auto barn are like the same stuff as factory.

SnipeZ · Post by **SnipeZ** » November 8th, 2012, 8:32 am

The saas was too narrow at 12mm. I need something that's wider like 16-20mm.
What's that stuff like? How wide and thick?

Cheers

LUVSIT · Post by **LUVSIT** » November 8th, 2012, 12:33 pm

You can get different sizes im pretty sure. And its as think as the factory chrome bar moulds from memory.

SnipeZ · Post by **SnipeZ** » November 8th, 2012, 2:44 pm

Ill have to do that. How much was it?

Cheers

Ef_frmnt · Post by **Ef_frmnt** » November 8th, 2012, 6:51 pm

from what I remember the front chrome strips are pretty much triangular, door stripes are easy to fix don't even have to remove the moulds.

SnipeZ · Post by **SnipeZ** » November 8th, 2012, 6:56 pm

Hmm we'll I removed them haha.
I'm just gonna fix them another time because the paints fucked and I just can't be bothered ATM lol

Cheers

LUVSIT · Post by **LUVSIT** » November 9th, 2012, 11:31 am

SnipeZ wrote:Ill have to do that. How much was it?

Cheers

From memory like $25 or so from sca, and about $7 more expensive from auto barn for the same stuff.

SnipeZ · Post by **SnipeZ** » November 9th, 2012, 12:26 pm

Awesome. When I get some coin ill have to get some

Cheers

SnipeZ · Post by **SnipeZ** » November 9th, 2012, 4:44 pm

Lucky for me wanting to clean and be thorough through inspections like everyone should be I found the culprit that stopped the box from grabbing first

The old energiser spring for the 1-2 synchro

Cheers

braad · Post by **braad** » March 3rd, 2013, 10:16 am

Wow...i thought there was an update

SnipeZ · Post by **SnipeZ** » March 3rd, 2013, 12:14 pm

There was but it was lost.
So here it is again

Someone thought they would try a new pin stripping technique and also a new paint job.

Cheers

wombi90 · Post by **wombi90** » March 3rd, 2013, 9:07 pm

I'd set up a camera wherever you keep the car the find out who it is and **** them up or tell the police

Ef_frmnt · Post by **Ef_frmnt** » March 3rd, 2013, 10:26 pm

Don't tell the police, bash the living shit out of them.

SnipeZ · Post by **SnipeZ** » March 4th, 2013, 6:30 am

Killed a set of tyres last time. Might have to do another.
Yeah gonna see cameras and shit but all it does is catch them doing it.

Cheers

tqure · Post by **tqure** » March 4th, 2013, 2:57 pm

shame to see such a nice car treated that way by a bunch of idiots

Post by **EFFalcon** » March 4th, 2013, 3:06 pm

again! :/

SnipeZ · Post by **SnipeZ** » March 4th, 2013, 5:20 pm

Yeah mate. My next car will be an ea I reckon lol

Cheers

jazza312 · Post by **jazza312** » March 4th, 2013, 5:27 pm

that's fucking horrible... why the **** would someone do that shit?
i'd be raging right about now!!

twice it's happened? have you pissed off someone big time or what!?!

SnipeZ · Post by **SnipeZ** » March 4th, 2013, 6:05 pm

Only just moved to the neighbourhood tbh. Don't know anyone around here. Plus I'm not nick haha

Cheers

Post by **Bipolar** » March 4th, 2013, 7:46 pm

Cunce.

I think you live in the wrong neighbourhood.

braad · Post by **braad** » March 5th, 2013, 6:17 am

Do a vinyl wrap saying you arent nick

SnyperEB · Post by **SnyperEB** » March 5th, 2013, 7:31 am

Man that sucks!!

SnipeZ · Post by **SnipeZ** » March 6th, 2013, 12:17 pm

So got my quote on repairs.
5900ish....
So just gotta wait and see

Cheers

braad · Post by **braad** » March 11th, 2013, 3:36 pm

far out. that hurts!

maybe buy a carport instead

SnipeZ · Post by **SnipeZ** » March 11th, 2013, 4:21 pm

No go. Renting ATM and garage is full.

Cheers

misk · Post by **misk** » March 12th, 2013, 4:25 am

so you've moved from the place that i came to and it still happened?
that sucks dude

i feel your pain in some way as someone in my street will call the cops as soon as an unregistered car is in the street. i copped a $700 fine for having the panelvan parked in the street on the weekend, even though its got a permit.

people have nothing better to do apparently.
i'd be raging at everyone in the street if there was any damage though, poor ****

LUVSIT · Post by **LUVSIT** » March 13th, 2013, 6:00 pm

WHAAAA! Again, thats just bull!

somebody deffently has hate for you :/

SnipeZ · Post by **SnipeZ** » March 13th, 2013, 6:16 pm

Might be my neighbour. Because where I park it, apparently it "obstructs" her drive way on the other side of the street and its hard for her to drive her BMW 318i out the drive way.

Honestly I could drive a bus out her drive way and still have room to move around.
Fucking women

Cheers

LUVSIT · Post by **LUVSIT** » March 13th, 2013, 7:03 pm

yer Probley wouldn't park there again. Just to be safe

SnipeZ · Post by **SnipeZ** » March 13th, 2013, 7:56 pm

Still sitting there. She can do what she likes. Unfortunatly once it gets resprayed through insurance it will be getting a rwc and put into my workshop waiting to be sold

Cheers

EATHSV · Post by **EATHSV** » March 15th, 2013, 10:09 pm

That's horrible mate. Sorry to see that.

braad · Post by **braad** » March 18th, 2013, 4:50 pm

its a shame mate, scumbags often ruin peoples experiences with cars

SnipeZ · Post by **SnipeZ** » March 18th, 2013, 5:07 pm

Gets better. The other night again.

Cheers

SnipeZ · Post by **SnipeZ** » March 18th, 2013, 5:08 pm

I think I'm just gonna buy a shitter ef and spend money on boosting it.

Cheers

LUVSIT · Post by **LUVSIT** » March 18th, 2013, 6:21 pm

what the hell is that?

NUT347 · Post by **NUT347** » March 18th, 2013, 7:01 pm

Dick smiths have a cheap CCTV system you can buy and hook up. They are $450 iirc, called a swan system.

Catch the little fuckers and ram their heads through your windscreen.