Kyle's ED Falcon GLi/NL Fairlane Ghia

five point slow · Post by **five point slow** » October 1st, 2008, 7:39 pm

So you're the prick who took those. I grabbed the front seats.

Kyle the ED4LTR · Post by **Kyle the ED4LTR** » October 1st, 2008, 7:46 pm

really?, i believe they were sold as a set but who knows, I didnt buy em of camfraser directly.

YBHVE4 · Post by **YBHVE4** » October 3rd, 2008, 11:43 am

sweet.

so, whats ur plans for the moulding now?

Kyle the ED4LTR · Post by **Kyle the ED4LTR** » October 3rd, 2008, 11:48 am

Well im gonna shove my original ones back on, and when I get some spare moolah get them sprayed and made colour coded like the ghia's

Kyle the ED4LTR · Post by **Kyle the ED4LTR** » October 3rd, 2008, 8:13 pm

look what arrived for me on the couriers today

http://www.alpine.com.au/products/produ ... odelID=219" onclick="window.open(this.href);return false;

Got it for $175, cant wait 2 test it

cam-tickford-ea · Post by **cam-tickford-ea** » October 3rd, 2008, 8:35 pm

man you gotta dump it when are ya

G3R3N · Post by **G3R3N** » October 4th, 2008, 1:33 pm

Too bad Kyle, coulda bought mine for $100

Kyle the ED4LTR · Post by **Kyle the ED4LTR** » October 4th, 2008, 2:03 pm

gerendasi wrote:Too bad Kyle, coulda bought mine for $100

haha true, but im trying 2 keep my audio all Alpine.

Kyle the ED4LTR · Post by **Kyle the ED4LTR** » October 4th, 2008, 7:20 pm

five point slow wrote:So you're the prick who took those. I grabbed the front seats.

ah at the wreckers

Post by **BLCKED** » October 5th, 2008, 10:23 am

nice sub mate, good work

BROCKYB8 · Post by **BROCKYB8** » October 5th, 2008, 11:40 am

i Have a nice alpine amp that will power that really well

Kyle the ED4LTR · Post by **Kyle the ED4LTR** » October 5th, 2008, 3:00 pm

unfortunately im not good when it comes to amp's

Post by **BLCKED** » October 6th, 2008, 4:05 pm

BROCKYB8 wrote:i Have a nice alpine amp that will power that really well

sorry mate but that amp will not power that

not even close,

that sub is 750 rms, the amp is 200 rms at 2 ohms not even close.

you need atleast 600 rms kyle and then you still wont reach its full potential. 750+rms would be better

XRated · Post by **XRated** » October 6th, 2008, 4:20 pm

BLCKED wrote:
BROCKYB8 wrote:i Have a nice alpine amp that will power that really well

sorry mate but that amp will not power that

not even close,

that sub is 750 rms, the amp is 200 rms at 2 ohms not even close.

you need atleast 600 rms kyle and then you still wont reach its full potential. 750+rms would be better

Sorry mate, but that amp will power the sub fine. It is actually rated at 300 watts rms at 2 ohms. You don't want to run more than 750 watts rms through a sub that is only rated for 750 watts rms. If anything you should run it slightly lower than the recommended maximum to be safe.

Stop pretending you know your stuff and spinning your bullshit that is 100% crap.

Post by **BLCKED** » October 6th, 2008, 5:00 pm

what ever idiot,

why the hell do you think it has an RMS rating for? its what it is RECCOMENDED TO RUN AT

[quote="BROCKYB8"]HEY GUYS TIME TO CLEAN OUT THE SHED .

ALPINE mono block amp .- Powers the subs above easy
mrd m300
$250

read the ebay add, 200 RMS @ 2 ohms

http://cgi.ebay.com/Alpine-MRD-M300-MON ... dZViewItem" onclick="window.open(this.href);return false;

if you seriosuly think that using a 200 rms amp to run a 750 rms DVC sub is ok then you have no idea

Post by **EA89SVOWAGON** » October 6th, 2008, 5:18 pm

where did u get ya globes for the cluster from? thankz nayth

Post by **Commando** » October 6th, 2008, 5:26 pm

Jimmy, it's so you don't blow your speaker(s) running off the amp.

24 hour ban for being a douche. Let's get the thread back on topic.

XRated · Post by **XRated** » October 6th, 2008, 8:50 pm

F.ck you're stupid Jimmy. If you were such an audiophile whiz kid you would either a) know you're shit, or b) have a decent fucking car audio setup. What do you think the 300 stands for in MRD 300? They're mostly under rated from factory too, but then again you probably don't know what a birth certificate is. You're a fucking spanner.

RMS Continuous Power @ 14v (1% THD), per channel into 2 ohms: 300Wx1

Sorry Kyle

Nice door trims! Seriously

Kyle the ED4LTR · Post by **Kyle the ED4LTR** » October 7th, 2008, 10:17 am

XRated wrote:
Sorry Kyle Nice door trims! Seriously

cheers mate.

Kyle the ED4LTR · Post by **Kyle the ED4LTR** » October 7th, 2008, 10:18 am

EA89SVOWAGON wrote:where did u get ya globes for the cluster from? thankz nayth

I got em off ebay mate, read my globe tutorial, that'll tell ya where to buy them and what fitting etc etc.

private9 · Post by **private9** » October 7th, 2008, 5:06 pm

Door trims came up awesome! Did you use Kev's patented method?

Kyle the ED4LTR · Post by **Kyle the ED4LTR** » October 7th, 2008, 5:13 pm

private9 wrote:Door trims came up awesome! Did you use Kev's patented method?

yup, Velvet Soap and a scrubbing brush

private9 · Post by **private9** » October 7th, 2008, 5:49 pm

Kyle the ED4LTR wrote:
private9 wrote:Door trims came up awesome! Did you use Kev's patented method?
yup, Velvet Soap and a scrubbing brush

Cool, I'll give mine a shot when I cbf!

Kyle the ED4LTR · Post by **Kyle the ED4LTR** » October 26th, 2008, 8:01 pm

Just got an update for my car.

Car is nearly finished, just small odds and ends like lowering, thermofans.

Car now has a 5 Speed in it, Has an EL Broadband Manifold (Just a couple of wires need to be put in, Fairmont electrics, Climate control.

I should have my car back sometime at the end of the week or on the weekend, ill post up some pics when i get it back.

XRated · Post by **XRated** » October 26th, 2008, 8:15 pm

Where is it? Who's doing the work?

Kyle the ED4LTR · Post by **Kyle the ED4LTR** » October 26th, 2008, 8:18 pm

XRated wrote:Where is it? Who's doing the work?

Schmee is doing the work.

travs ea-xr6 · Post by **travs ea-xr6** » October 26th, 2008, 8:20 pm

are you running a el xr6 manual ecu with the bbm manifold setup

Kyle the ED4LTR · Post by **Kyle the ED4LTR** » October 26th, 2008, 8:22 pm

travs ea-xr6 wrote:are you running a el xr6 manual ecu with the bbm manifold setup

yup

travs ea-xr6 · Post by **travs ea-xr6** » October 26th, 2008, 8:26 pm

Has kev finished the bbm conversion yet

Kyle the ED4LTR · Post by **Kyle the ED4LTR** » October 26th, 2008, 8:31 pm

travs ea-xr6 wrote:Has kev finished the bbm conversion yet

i think its just a matter of a couple of wires but yeh it's done as far as i know

travs ea-xr6 · Post by **travs ea-xr6** » October 26th, 2008, 8:35 pm

Cool as yer i sore ya car around at kevs place when i went around to get some thermo fans off him was looking good

.Im interested in doing the bbm mod to.What motor you running in it

Kyle the ED4LTR · Post by **Kyle the ED4LTR** » October 26th, 2008, 8:37 pm

travs ea-xr6 wrote:Cool as yer i sore ya car around at kevs place when i went around to get some thermo fans off him was looking good .Im interested in doing the bbm mod to.What motor you running in it

Standard ED Engine (Early Series), when did u see my car?

travs ea-xr6 · Post by **travs ea-xr6** » October 26th, 2008, 8:41 pm

I was around last wekend and i think it was your car with the cover on it yer

Kyle the ED4LTR · Post by **Kyle the ED4LTR** » October 26th, 2008, 8:42 pm

travs ea-xr6 wrote:I was around last wekend and i think it was your car with the cover on it yer

yup

Post by **Commando** » October 26th, 2008, 11:25 pm

YBHVE4 · Post by **YBHVE4** » October 27th, 2008, 10:33 am

i think next your topic should become:

Kyle the ED4LTR's XR6 Ghia Turbo Project

Kyle the ED4LTR · Post by **Kyle the ED4LTR** » October 27th, 2008, 10:39 am

YBHVE4 wrote:i think next your topic should become:

Kyle the ED4LTR's XR6 Ghia Turbo Project

hehehe, one day but not yet, when im closer to going off my P's

YBHVE4 · Post by **YBHVE4** » October 27th, 2008, 10:42 am

good stuff.

have you got the xr kit yet?

and quad front lights?

Kyle the ED4LTR · Post by **Kyle the ED4LTR** » October 27th, 2008, 10:58 am

YBHVE4 wrote:good stuff.

have you got the xr kit yet?

and quad front lights?

ive got an XR front lights organised but not the lip etc, just gotta pick it up when I have the cash spare.

Kyle the ED4LTR · Post by **Kyle the ED4LTR** » October 28th, 2008, 9:21 pm

Photo courtesy of burnt turtle