apprentice wages

This is a general discussion forum, open to all participants
User avatar
bng
Spooling Up
Posts: 569
Joined: February 17th, 2008, 11:23 am
Location: Sydney

Re: apprentice wages

Post by bng »

I'm making around 450$ take home as a second yr fridgie. On a good week it's up around $800. My brother is a mature 1st yr and is on nearly the same as me hourly
Kinda sucks
User avatar
Josh L
Cruising
Posts: 364
Joined: July 21st, 2008, 7:05 pm
Location: Melbourne

Re: apprentice wages

Post by Josh L »

G'day,

Kudos for being interested in getting urself an apprenticeship.

I'm a second year mature age panel beating apprentice. I know that when I started my apprenticeship (at 22yo) that was the starting age for mature age apprentices. I don't know what the age for mature age apprentices is now. First year I was getting approx $450 after tax, now second year is about $505 after tax.

At my same work, there is a bloke the same age who is completing his final year as a spray painter and is only just getting more than me (unsure if that was with a bit of o/t or not).

Even though being a mature age apprentice gives me a higher wage, I still wish I had started it at least 6 years ago, would've been on shit loads more by now.

Start an apprenticeship asap, mature age or not... definitely worth it.

Josh.
Loud n Low MKII in the making
'95 EF Gli
User avatar
nstg8a
Hitting N2O
Posts: 3197
Joined: August 4th, 2008, 1:38 pm
Location: Norman Park, Brisbane.

Re: apprentice wages

Post by nstg8a »

is it true the government pays part of your wage as an apprentice? like a percentage goes straight to the workplace to encourage them to use apprentices?
Image
User avatar
CaRtZ
Spooling Up
Posts: 873
Joined: July 13th, 2007, 7:08 pm
Location: Wodonga

Re: apprentice wages

Post by CaRtZ »

they get tax breaks
EL 'Mont Wagon ----- Full Std & boring

EF Sedan aka Drift Hack ----- Forged AU engine, 6Boost, Garrett, Haltech, 6sp manual, 460hp @ 17psi

http://www.dewarsengines.com.au/
User avatar
bng
Spooling Up
Posts: 569
Joined: February 17th, 2008, 11:23 am
Location: Sydney

Re: apprentice wages

Post by bng »

nstg8a wrote:is it true the government pays part of your wage as an apprentice? like a percentage goes straight to the workplace to encourage them to use apprentices?
I know with us, every 6months for the first 2 yrs of your apprenticeship you get $500 and then ontop of that, 12 and 24months you get and extra $500. So in total, $2000 not bad if i say so
User avatar
cranners
Spooling Up
Posts: 959
Joined: July 13th, 2007, 6:44 pm
Location: Muzza b
Contact:

Re: apprentice wages

Post by cranners »

Im looking at getting into mechanics asap, but need to find somewhere to take me on..

Has anyone got any connections??
-1997 EL GLi Auto Falcon-
Pacemaker Extractors, 2.5 Redback System, Hi Flow Cat, 3.5" Chrome Dumpy, Wade1636, Blueprinted Head, Slotted Rotors and Bendix Pads, Pioneer Deck, Pioneer 6" 4way Rears 260w runing off a Audioline 2x300 watt Amp, Kicker Dual 12" Comps running off a Clarion Mono APX1300 amp, Custom Plates, Tinted Windows, 17" Ba XR8 Rims, Ultralow rear Superlow front Springs, Fairmont Boot Garnish, Fairmont Tail lights, Trip Computer, Custom Grill Mesh
    User avatar
    holmsy
    Shooting Flames
    Posts: 6473
    Joined: August 2nd, 2007, 11:07 pm
    Location: Geelong

    Re: apprentice wages

    Post by holmsy »

    yeh plus 800 in tools.
    and there is a few 250 bonus's as well.
    Project: SLOXR8: 1994 EF XR8, mech shift kit, 3500 histall, Lokka, 36lb injectors, AU 185 motor, Cranecam 444225, crane roller rockers, crow valve springs, Pacies, 3" exhaust, hiflo cats. twin 044's, vortech v2,microtech tuned by daltons (290.3rwkw @11psi) at DALTONS
    Image
    User avatar
    CaRtZ
    Spooling Up
    Posts: 873
    Joined: July 13th, 2007, 7:08 pm
    Location: Wodonga

    Re: apprentice wages

    Post by CaRtZ »

    holmsy wrote:yeh plus 800 in tools.
    and there is a few 250 bonus's as well.
    false the laws have changed in VIC. no longer get Tools For Your Trade ($800) and the Wage Top-ups have changed, im not sure of exact amounts however they are respective of ur yr (ie 1st yr top ups are more than 2nd yr) and accomodate the removal of TFYT

    if u want exact details ring an appreniceship agencies
    EL 'Mont Wagon ----- Full Std & boring

    EF Sedan aka Drift Hack ----- Forged AU engine, 6Boost, Garrett, Haltech, 6sp manual, 460hp @ 17psi

    http://www.dewarsengines.com.au/
    User avatar
    holmsy
    Shooting Flames
    Posts: 6473
    Joined: August 2nd, 2007, 11:07 pm
    Location: Geelong

    Re: apprentice wages

    Post by holmsy »

    i thought it might have changed recently.
    but thats what i got last year
    Project: SLOXR8: 1994 EF XR8, mech shift kit, 3500 histall, Lokka, 36lb injectors, AU 185 motor, Cranecam 444225, crane roller rockers, crow valve springs, Pacies, 3" exhaust, hiflo cats. twin 044's, vortech v2,microtech tuned by daltons (290.3rwkw @11psi) at DALTONS
    Image
    User avatar
    CaRtZ
    Spooling Up
    Posts: 873
    Joined: July 13th, 2007, 7:08 pm
    Location: Wodonga

    Re: apprentice wages

    Post by CaRtZ »

    yeah i got it in 07 but this yr its a bit different
    EL 'Mont Wagon ----- Full Std & boring

    EF Sedan aka Drift Hack ----- Forged AU engine, 6Boost, Garrett, Haltech, 6sp manual, 460hp @ 17psi

    http://www.dewarsengines.com.au/
    Maximus
    Idling
    Posts: 136
    Joined: October 14th, 2007, 7:13 pm

    Re: apprentice wages

    Post by Maximus »

    holmsy wrote:**** man screw that. As 2nd year elec im getting around 600 a week take home

    I second that. I'm also second year. Yay EBA and Site allowance.
    User avatar
    huddo11
    Cruising
    Posts: 421
    Joined: May 7th, 2009, 9:32 pm
    Location: Chelsea Heights, Melbourne
    Contact:

    Re: apprentice wages

    Post by huddo11 »

    im on $7 an hour first year ohh yea :lol:
    pr1tch
    Idling
    Posts: 30
    Joined: June 28th, 2009, 11:10 pm
    Location: mooroolbark, vic

    Re: apprentice wages

    Post by pr1tch »

    im a 1st year apprentice chef and i pull in around 500 a week but thats coz of weekend wages
    95 cardy red futura, lowered, sports exhaust work in progress
    next car ed xr6 ssl gt-p 20s, atomik rebuild, respray ba orange
    User avatar
    scorcher
    Cruising
    Posts: 293
    Joined: December 23rd, 2007, 8:24 am
    Location: wodonga, vic

    Re: apprentice wages

    Post by scorcher »

    gee i remember when doing my mechanic apprenticeship and taking about 170 home about 10 years ago. i work 3 jobs at present on the weekend i can take home 550 bucks from my extra 2 jobs and they are jobs you don't need any experience in apart from a MR truck licence which i got free through the job i do during the week. during the week i work 4am - 12.30pm at home on the couch at 12.45 just work in a food distribution warehouse and take home 700 bucks. i have been looking at doing another apprenticeship too either electrician or boilermaker but just don't know because of the pay rate.
    1988 EA, 20 inch wheels, scorcher body kit, 330mm big brake upgrade, AU diff, Atomic Performance Built Engine, Snort custom Twin Turbo set up, Snort Polished Plenum, leather seats, 20" LCD in boot
    User avatar
    bentls
    Full Boost
    Posts: 2882
    Joined: July 16th, 2007, 10:10 pm

    Re: apprentice wages

    Post by bentls »

    2nd year motor mechanic workin in a tyre/mechanical shop earning up to 440 a week take home... better than when i was with ford earning 330 a week and max of 3 hours for saturdays so like 380 ish max a week...

    as an apprentice the only thing that gives u a bit more cash is shitloads of OT...
    Image
    94 soarer
    01 senator signature 5.7
    96 k11 micra
    jarryddelany
    Spooling Up
    Posts: 540
    Joined: April 15th, 2009, 8:32 pm
    Location: wallan

    Re: apprentice wages

    Post by jarryddelany »

    ill probly try and find an apprenticeship through the vacc, then atleast they organise what i should be paid etc.
    new daily dark blue au forte series III stock as a rock
    User avatar
    EL XR8
    Spooling Up
    Posts: 612
    Joined: July 15th, 2007, 6:42 pm

    Re: apprentice wages

    Post by EL XR8 »

    All i can say is, you'll get good money on a big union site. Thats pretty much about it.

    Every guy i've known and worked with who has done their apprenticeship on a big site has been useless at their trade.

    If you want to be good at your trade, try and work with a smaller company, you'll learn a hell of a lot more and wont just be some qualified guys monkey and bitch for your whole apprenticeship.

    I wouldn't trust any of my mates from trade school who worked on a union site to change a light bulb in my house.
    Blown EL XR8
    Supercharged 2011 RXT-X 260 jetski
    Frost
    Full Boost
    Posts: 2543
    Joined: August 21st, 2007, 9:25 pm

    Re: apprentice wages

    Post by Frost »

    Our Cable Tech apprentice is on 45 a year as an adult apprentice. But he is 31.
    fairmont4me
    Idling
    Posts: 148
    Joined: July 26th, 2008, 5:55 pm
    Location: NOR Perth WA

    Re: apprentice wages

    Post by fairmont4me »

    Im a apprentice sparky, commercial/ industrial, not auto. Im through a group training setup which has its pros and cons. youve got flexibility on where and who you work with, if you dont like a company you can ask to be placed somewhere else etc. Im a 4 year now, will be out of my time 6-8 months. I started of as a first year 17 on $6.36 an hour, 2nd was just under 9 i think. Ive been with the same host contractor since ive started and they have been pretty good to me.

    The last 2/3rds of my 3rd i got on to a new agreement with my host which gives me extra pay on top of the basic group training wage. i was on 20 bucks an hour as a third year plus travel allowance, when it was booming was on a 4 floor fitout doin 55 hour weeks taking home 1100-1200

    Im 4th year now on just under 24 bucks an hour plus $22 a day travel allowance if i drive to site.
    Post Reply