SLY5LT.... NL 'LANE...V8.

by **SLY5LT** » January 20th, 2010, 6:39 am

thanks mate, there'll be NO bonnet scoop's on this one....(unless i can't fit the kb & turbo with nos) under there

it will be getting lowered with new rim's (so many choices now in this offset).... the type of extra power is yet to be decided :cool:

****STEVES' SILLY SALE***** will start tonight, as i start posting up the part's that won't be going onto the 'lane which'll fund the first round of mod's to the ltd :good:

by **SLY5LT** » January 21st, 2010, 6:06 pm

i got the ltd today......after a wash & the first layer of bug's were removed, there's quite a few scratch's here & there (to be expected for the price).
the interior is good, once again needs a good clean then it'll be upto scratch :grin:

there is an inconsistant overhead engine noise (tensioner's going from some forum's) will be popping into fraud to get some info :roll:

overall......for the price & the expence of the plan's i have for it :cool:

......
it should workout well & not be to costly :beg:

by **[Sterling]** » January 21st, 2010, 6:17 pm

Congrats! welcome to the B-Series lol

Needs more kenne bell. And Airbags.

by **SLY5LT** » January 21st, 2010, 9:24 pm

[Sterling] wrote:Congrats! welcome to the B-Series lol

Needs more kenne bell. And Airbags.

thanks kester :grin:

it needs alot :lol:

..... well not that much

but it'll happen in time !

by **burnt turtle** » January 21st, 2010, 10:00 pm

needs dumpage like this mate

haha, gotta tell me what ya plans are. need give you a run aswell.

by **travs ea-xr6** » January 21st, 2010, 10:10 pm

man how do u go with cambar ware on the back

by **Mr. CVE** » January 21st, 2010, 10:26 pm

I put offset bushes on mine, just means you cant go too wide on the rears.
I have 285/30/20 's and they just fit.

by **burnt turtle** » January 21st, 2010, 10:28 pm

dunno, i dont drive it often enough lol. havnt done enough k's on the tyres too.

by **SLY5LT** » January 21st, 2010, 10:32 pm

burnt turtle wrote:needs dumpage like this mate

haha, gotta tell me what ya plans are. need give you a run aswell.

kev gave a good description this arvo of your new spring's :grin:

have ya got a side on shot?

by **burnt turtle** » January 21st, 2010, 10:38 pm

nah il take a side on tomorrow night when i chuck my fronts back in. might see ya out tomorrow night? il prob be in it.

by **SLY5LT** » January 21st, 2010, 10:49 pm

burnt turtle wrote:nah il take a side on tomorrow night when i chuck my fronts back in. might see ya out tomorrow night? il prob be in it.

i'll be out at calder first for the street meet, then'll be doing a couple of lap's of the hwy on the way home :grin:

by **Dumpsta** » January 22nd, 2010, 12:52 pm

SLY5LT wrote:

Gotta say, the one in the back looks a whole heap tougher..

by **XR_Lightning** » January 22nd, 2010, 1:52 pm

SLY5LT wrote:i got the ltd today......after a wash & the first layer of bug's were removed, there's quite a few scratch's here & there (to be expected for the price).
the interior is good, once again needs a good clean then it'll be upto scratch
there is an inconsistant overhead engine noise (tensioner's going from some forum's) will be popping into fraud to get some info
overall......for the price & the expence of the plan's i have for it ......
it should workout well & not be to costly

timing chain tensioner problems where only on the 4v boss motors, 3v had problems with the cam phasers rattling, new car needs pod filter straight up off the throttle body through a hole into the boonet and bonnet scoop covering it, now that would be cool :grin:

by **SLY5LT** » January 22nd, 2010, 3:26 pm

Dumpsta...... i just picked it up, given a bit time & cash ..... it'll come up ok :cool:

XR_Lightning wrote:timing chain tensioner problems where only on the 4v boss motors, 3v had problems with the cam phasers rattling, new car needs pod filter straight up off the throttle body through a hole into the boonet and bonnet scoop covering it, now that would be cool

thanks for that, sounds exactly like the noise i can hear

i just got a workshop manual this arvo and will be doing some reading tonight (after the hwy)

by **pHaT`eL** » January 22nd, 2010, 3:33 pm

For the outside, dump it, get the chrome mirror scalps and throw of some BF2 G8 17's. Factory tough once again!

by **SLY5LT** » January 22nd, 2010, 5:28 pm

pHaT`eL wrote:For the outside, dump it, get the chrome mirror scalps and throw of some BF2 G8 17's. Factory tough once again!

i have a couple of thing's in mind, and they don't involve a couple of beers & a couple of can's of spray paint

unlike the fairlane, i'll do a bit more research before i spend cash on it :write:

by **EF ECTIV** » January 22nd, 2010, 10:22 pm

**** I love the bonnet on that NL lane.... I gotta hurry up and do mine....

by **burnt turtle** » January 23rd, 2010, 11:09 am

SLY5LT wrote:have ya got a side on shot?

crap quality but ya get the height roughly, has settled since then.

by **SLY5LT** » January 23rd, 2010, 12:24 pm

those wheel's don't look to bad :good:

i'm not looking at going to low as i'd have driveway issues again :roll:

by **burnt turtle** » January 23rd, 2010, 12:32 pm

well thats why its parked there and not up either of the driveways on either side of it. you home? i should drop by and show ya, and check out the LTD.

by **SLY5LT** » January 23rd, 2010, 1:03 pm

burnt turtle wrote:well thats why its parked there and not up either of the driveways on either side of it.

there's always a price to pay :grin:

i'm on my way out, but sure....some time over the w/end.
apart from 3 wash's to get the bug's off (it must not been washed for age's) i'm yet to give the thing a good clean inside out.
about to go grab some cleaning stuff, oil, filter's etc. then off to show the bro (again) in day light.

by **mad_keen** » February 3rd, 2010, 9:24 pm

SLY5LT wrote:those wheel's don't look to bad
i'm not looking at going to low as i'd have driveway issues again

NO NO NO! you shouldnt be modifying your car according to your driveway. You shud be modifying ur driveway according to your car. Car comes first

by **SLY5LT** » February 3rd, 2010, 11:14 pm

mad_keen wrote:
SLY5LT wrote:those wheel's don't look to bad
i'm not looking at going to low as i'd have driveway issues again

NO NO NO! you shouldnt be modifying your car according to your driveway. You shud be modifying ur driveway according to your car. Car comes first

you have'nt seen how low josh's car is :this:

...... it will be lower, how much i'm not sure.

by **SLY5LT** » June 8th, 2010, 12:44 am

well... i've been slack :roll:

i'm yet to do a for sale thread, but the nl fairlane is for sale !
i'm open to offer's..... i'm looking for around $5000/$5500 for it.
it's got reg (late feb 2011), but no rwc (should'nt be much in it?).
pm me if your keen

....... proper for sale thread to come !!!!!

by **BROCKYB8** » June 8th, 2010, 9:11 am

Hurry up and put it upin for sale thread . It needs to be gone so u can do mods on the LTD .

by **pHaT`eL** » June 8th, 2010, 5:42 pm

Will swap for Kenne Bell?

by **SLY5LT** » June 8th, 2010, 11:47 pm

pHaT`eL wrote:Will swap for Kenne Bell?

and a new bonnet with that so it'll fit

by **BROCKYB8** » June 9th, 2010, 9:30 am

Nah just cut a hole in it .

by **SLY5LT** » June 9th, 2010, 12:13 pm

BROCKYB8 wrote:Nah just cut a hole in it .

ya cant do that......it's a b-series.... not a e-series

by **EFFalcon** » June 9th, 2010, 12:20 pm

interested in selling bonnet?

by **BROCKYB8** » June 9th, 2010, 12:34 pm

LOL nope i think a heap want that bonnet .
If you wanna buy bonnet im sure it will come with the rest of the car .

by **SnyperEB** » June 9th, 2010, 12:41 pm

BROCKYB8 wrote:LOL nope i think a heap want that bonnet .
If you wanna buy bonnet im sure it will come with the rest of the car .

Didnt know you owned it Scott?

by **SLY5LT** » June 9th, 2010, 1:01 pm

BROCKYB8 wrote:LOL nope i think a heap want that bonnet .
If you wanna buy bonnet im sure it will come with the rest of the car .

spot on

i've alot of people ask about it.
easy fix....buy the car....swap the good bit's (bonnet, 3.89 diff, headers/exhaust) on sell it :drinks2:

by **SnyperEB** » June 9th, 2010, 1:03 pm

Sorry I must of missed it, but how much are you looking at for it?

by **SLY5LT** » June 9th, 2010, 1:04 pm

SnyperEB wrote:
BROCKYB8 wrote:LOL nope i think a heap want that bonnet .
If you wanna buy bonnet im sure it will come with the rest of the car .

Didnt know you owned it Scott?

scottys' the e-series "max markson" agent to the star's :shock:

by **SLY5LT** » June 9th, 2010, 1:06 pm

SnyperEB wrote:Sorry I must of missed it, but how much are you looking at for it?

around $5000 ono

by **SnyperEB** » June 9th, 2010, 1:43 pm

Seems very fair!!

by **BROCKYB8** » June 9th, 2010, 2:23 pm

SnyperEB wrote:
BROCKYB8 wrote:LOL nope i think a heap want that bonnet .
If you wanna buy bonnet im sure it will come with the rest of the car .

Didnt know you owned it Scott?

i only knew that because we were chatting at kevs on sunday about his car . :thumbsup:

SLY5LT wrote:
SnyperEB wrote:
BROCKYB8 wrote:LOL nope i think a heap want that bonnet .
If you wanna buy bonnet im sure it will come with the rest of the car .

Didnt know you owned it Scott?

scottys' the e-series "max markson" agent to the star's

I represent the SLYSLuT

(**please note there will be no nude pictures sent out**)

by **SnyperEB** » June 9th, 2010, 2:26 pm

BROCKYB8 wrote:I represent the SLYSLuT (**please note there will be no nude pictures sent out**)

Thanks Fvck!!

by **SLY5LT** » June 10th, 2010, 3:14 am

BROCKYB8 wrote:I represent the SLYSLuT (**please note there will be no nude pictures sent out**)

you've done a deal with ..... NEW IDEA ... yes :confused:

or was it street fords ?

Who is online