Wombi's El Xr sold. New au ute

by **wombi90** » October 12th, 2012, 9:08 pm

Nah man pm'd you earlier

by **OED666** » October 12th, 2012, 9:30 pm

Sorry, didn't see until after I posted... Farking Aus post is shit!!

by **wombi90** » October 12th, 2012, 9:32 pm

All good, ill go to my local post office and see if I can do anything from my end

by **SLO4LT** » October 13th, 2012, 1:32 pm

Just admired some of the pics with the GT's
Mmm looks so good!

by **wombi90** » October 13th, 2012, 3:21 pm : **LUVSIT Likes this post**

Thanks dude! I'm getting the bonnet front bar and rear bar aswell as the kit and the bigger el Xr spoiler it'll look nearly the same as yours but green haha

by **wombi90** » October 20th, 2012, 10:26 pm

Well kit has had a few minor repairs done just waiting to squeeze it in for paint between jobs at work.

Still no clutch from turbo xr6 or clutch pin kit from mal wood **** you auspost

Also finished stripping the motor down to a bare block so ill be talking to a few engine builders around here see what they suggest

Also brought a Nl Concorde was too cheap not to buy I'm not entirely sure what to put in this yet! has had a hit to the front rh rail set the drivers airbag off but all the good pieces look to be in good condition so I'm picking that up next weekend on the Saturday hopefully that way I can still make c4c

by **89.SVO** » October 20th, 2012, 10:38 pm

that interior is horn. insert to XR naow

by **wombi90** » October 20th, 2012, 10:50 pm

But the Xr seats are pretty comfy! I dunno I mean the Concorde interior does look very appealing!. I also have a second set of Concorde trims the purchased before I seen the car for sale

by **LUVSIT** » October 22nd, 2012, 7:10 pm

Score!

by **wombi90** » October 22nd, 2012, 7:24 pm

Nah that dude fucked me over sold it from under me so I bought another el xr6 factory manual and kit

by **braad** » October 29th, 2012, 12:47 pm

Updates mate?

Are you wrecking the concorde? If you are i might be interested in the body moulds with the clear blinkers

by **wombi90** » October 29th, 2012, 9:32 pm

Nah the Guy sold the Concorde before I could pick it up but I've brought a el Xr to wreck out for the time being

by **LUVSIT** » November 9th, 2012, 10:46 pm

wombi90 wrote:Nah the Guy sold the Concorde before I could pick it up but I've brought a el Xr to wreck out for the time being

Shit bloke, the concorde would of been good to wreck out plus being with all the goodies on her!

by **wombi90** » November 9th, 2012, 11:16 pm

Yeah oh well, this el Xr has a few good parts I need, I've been getting my other el Ghia ready for rwc & rego now it's 15 years old haha

by **mad_keen** » November 11th, 2012, 8:38 am

Hey..an answer to my messages about the trims i bought would be sweet.. :good:

by **wombi90** » November 11th, 2012, 8:46 am

Check your pm's.

by **wombi90** » November 13th, 2012, 8:08 pm

Test fitted the kit today, It still needs paint As its not the right colour

by **Devo** » November 14th, 2012, 4:29 pm

damn that looks mint! other then the non matching colour of course

should be sweet once its painted though!

by **wombi90** » November 14th, 2012, 7:10 pm

Yeah at least it's not a massive colour difference but it is annoying, starting to move stuff of the parts car aswell so should have a few more things coming for this soon,

And I'm still waiting for my clutch from turbo Xr6 been over 2 months now

by **LUVSIT** » November 15th, 2012, 6:07 am

That looks ace! I so need roof and bagt wheels now

by **wombi90** » November 15th, 2012, 9:52 am

I'm going to put the original tail lights back in aswell and ill smooth out the panel above the rear bar and see how that looks,

The best part about the kit us the bigger wing I reckon it's awesome haha

by **.tapeworm** » November 16th, 2012, 8:39 pm

BA GT's suits so well

by **wombi90** » November 16th, 2012, 11:35 pm

.tapeworm wrote:BA GT's suits so well

Thanks mate I agree they suit the kit aswell

by **braad** » November 19th, 2012, 9:48 pm

I know some (most) hate the original amber tail lights, i reckon they go alright. Give it a whirl

Kit looks great

by **wombi90** » November 20th, 2012, 12:07 am

Yeah I fitted them Friday night loving them. Cars been neglected now went to Geelong on the weekend with a diff and gear bix conversion in the back and the gearbox bounced in to the boot and put some high spots in there, lucky I know a panel beater

works still to busy to squeeze the kit in but oh well, been getting my Ghia rwc to sell

by **wombi90** » November 20th, 2012, 12:12 am

here it is next to my gfs new cruze

by **wombi90** » November 20th, 2012, 12:32 am

Here's a Mitsubishi colt a guy from work is building its going to have a forged nissan vg30 in it looks huge in the bay, he built ke355 and avg030, he's building a cool 120y ATM too

by **wombi90** » November 20th, 2012, 12:35 am

Here's the Ghia ATM still tidying it up

by **wombi90** » November 25th, 2012, 8:59 pm

Got defected Saturday morning haha was a good cop though only got me on a minor for ground clearance,went over the whole car couldn't find nothing else, he said the wheels are fine didn't see the spacers probably,

by **obsezd** » November 26th, 2012, 5:48 am

wombi90 wrote:Got defected Saturday morning haha was a good cop though only got me on a minor for ground clearance,went over the whole car couldn't find nothing else, he said the wheels are fine didn't see the spacers probably,

im pretty sure spacers are legal now

by **wombi90** » November 26th, 2012, 4:46 pm

obsezd wrote:
wombi90 wrote:Got defected Saturday morning haha was a good cop though only got me on a minor for ground clearance,went over the whole car couldn't find nothing else, he said the wheels are fine didn't see the spacers probably,

im pretty sure spacers are legal now

Where did you hear that?

Also picked up some koni yellows for the front might get the rear springs compressed while I have them out aswell

by **obsezd** » November 26th, 2012, 5:24 pm

from a mate who use to do them. will have to look it up too see if its right though

by **wombi90** » November 26th, 2012, 6:00 pm

Yeah Ive never heard of that before, not saying it isn't true but I thought they were illegal

by **braad** » November 29th, 2012, 8:57 am

I'll err on the side of caution and assume they're illegal. Considering Engineering a modified just got harder here (NSW), i cant see us having the freedom

Anyway, hows that kit going?

by **wombi90** » December 16th, 2012, 11:13 pm

picked up some new wheels for it for a change, haven't done to much else lately will update thread properly this week

by **wombi90** » December 17th, 2012, 10:59 pm

Haven't been doing much modding to this lately just fixing up a few things doing upper and lower ball joints, tie rod ends, ordered a nolathane complete vehicle bush kit, then ill get another wheel alignment,
Fitted the koni yellow front struts that I got if Superhus which dropped the front more so I have to lower the rear a tad more to level it out,
Picked up an el gt steering wheel still unsure if ill use it though,
Gave it a quick polish, other them that been to busy to do much else really want to get the new motor in it soon

by **justa6** » December 18th, 2012, 4:32 am

looks hot, not sure on the wheels though.

did i read that right. you just got done for to low, so you lowered it more?

by **DJV8T5** » December 18th, 2012, 7:05 am

Don't know why, but those wheels look huge on it compared to the GT's...but they should still be 18's if they are the AU Rebel Wheels.

Car looks pretty sweet like this

by **wombi90** » December 18th, 2012, 7:33 am

They are the same springs as I had fitted so I didn't expect it to drop more maybe the Konis have different spring seat positions? I only got defected because it was spring nats weekend.

Im not getting rid of the ba gts i only got the wheels because they only cost me a set of Ftrs and a few other things of that wreck xr6 I brought,

by **wombi90** » December 18th, 2012, 7:34 am : **skidel Likes this post**

Yeah they are 18" and I agree they look way bigger then the Gts I'm happy I didn't get any 19"s

Who is online