1998 EL XR6

by **obsezd** » January 1st, 2013, 2:24 am

i drove past you guys in the afternoon just hammering it ahaha

by **LUVSIT** » January 8th, 2013, 5:03 pm

obsezd wrote:i drove past you guys in the afternoon just hammering it ahaha

I seen

by **SLO4LT** » January 10th, 2013, 5:18 am

obsezd wrote:i drove past you guys in the afternoon just hammering it ahaha

and I heard lol

by **LUVSIT** » February 9th, 2013, 3:07 pm

So havnt logged on in abit, but have slight updates for the XR-
-HID Headlight converison with white LED parkers
-Pacemaker 4480 headers and Hi-Flow cat have been bolted up
-SSL King Springs F+R
-Engine bay tidy up
-Black Mesh for the front bumper

With a big thanks to Phat EL and SLO4LT for the help along the way.

by **LUVSIT** » February 18th, 2013, 11:11 am : **SLO4LT Likes this post**

So with All Ford Day over the weekend. I wanted to clean my engine bay up abit for the weekend.
With help once again from Damo (SlO4LT) thank you mate!
Here's A before and after picute below.

by **LUVSIT** » February 18th, 2013, 11:22 am : **Bipolar Likes this post**

Also afew weeks back caught up with afew mates and got some shots in.

by **apoc** » February 18th, 2013, 11:37 am

Looked good at AFD!

by **LUVSIT** » February 18th, 2013, 11:47 am

apoc wrote:Looked good at AFD!

Thanks apoc

your pics turned out good too from AFD

by **SLO4LT** » February 18th, 2013, 3:22 pm

LUVSIT wrote:So with All Ford Day over the weekend. I wanted to clean my engine bay up abit for the weekend. And also gave it a detail*
With help once again from Damo (SlO4LT) thank you mate your the best!!
Here's A before and after picture* below.

All good mate! Came up saweeet!! :cool:

by **wombi90** » February 18th, 2013, 5:26 pm

Looks heaps better man, nice work damo,

by **LUVSIT** » February 21st, 2013, 6:40 am

Thanks boys.
Would look and go better with a snail strapped to the side instead of those paceys, but that's later on in life.

by **BROCKYB8** » February 21st, 2013, 8:36 am

Looks the good man . had a nice look at it on weekend

by **LUVSIT** » March 13th, 2013, 5:50 pm

thanks scotty!

by **LUVSIT** » March 17th, 2013, 4:34 pm : **kwikxr, tqure Likes this post**

by **wombi90** » March 18th, 2013, 8:00 pm

Looks mint man starting to love this blue , yours sits alright too! What suspension you using?

by **LUVSIT** » March 19th, 2013, 10:45 am

cheers womb
it needs a re spray though. The photos make it look better than it is.
I'm running ssl king springs with Monroe shockers/ struts. But will be getting the konis soon

by **LUVSIT** » April 28th, 2013, 4:52 pm

Few updates here for the xr6.
I went and seen Mr CVE for some new toys.
Ive orderd in a extreme cushion button clutch, flywheel, presure plate ect, and a hurst billet short throw shifter.

Also have had a new kenwood double din headunit installed. Looks much classier than previous :p
Still need to upgrade speakers and amp which will be coming soon! still deciding on what to go for. Was thinking the Polk Audio MM splits? but they have a pretty big price tag behind them :-(

by **LUVSIT** » April 28th, 2013, 5:06 pm

It was also over due on getting these red xr moulds back to life.
So over Anzac weekend i had to refreshen these pink moulds of mine.
Car looked like paper mashe lol
I know i really should of taken the moulds off but i really couldnt be bothered.
Pretty happy on how they turned out with not one bit of overspray

by **tqure** » April 28th, 2013, 6:28 pm

cars looking sweet mate
done a nice job on the moulds

by **LUVSIT** » April 28th, 2013, 11:11 pm

tqure wrote:cars looking sweet mate
done a nice job on the moulds

cheers mate!
yer I was real happy on how nice the moulds turned out. looks new again

by **LUVSIT** » June 4th, 2013, 12:31 pm

Afew weeks ago, I came across some 17inch au series 2/3 xr wheels in pre au.
I had them painted up in a gloss black. Just for a different look for my car.
Here's how they turned out.

by **Mate** » June 4th, 2013, 2:41 pm

Nice, can't wait to see them on the car!

by **LUVSIT** » June 4th, 2013, 7:06 pm

thanks mate.
I just need some tyres then I can throw them on.
Few people have said it's going to look crap, but I'll just see how it goes.

by **obsezd** » June 4th, 2013, 8:26 pm

they shouldnt look too bad

by **Another_ef** » June 6th, 2013, 12:07 am

Lay them up against the car and see how they will look, thats what i've always done with new wheels

by **EFFalcon** » June 6th, 2013, 8:33 am

Don't see AU II's very often anymore.

by **BROCKYB8** » June 6th, 2013, 8:45 am

i think they will def look good cant wait to see pics

by **LUVSIT** » June 6th, 2013, 3:13 pm

EFFalcon wrote:Don't see AU II's very often anymore.

I know john, and I've always liked them too on E series

by **kwikxr** » June 6th, 2013, 3:35 pm

Should look good I reckon, gloss black wheels go surprisingly well against a dark car (had a similar look on my EF so I might be a little biased lol). Looking forward to seeing pic's when they are on :grin:

by **Mate** » June 7th, 2013, 11:03 am

I like both your wheel choices! Back in 2004 my mate had some EL GT’s on his XE, I first thought they were real and wondered why he spend like $3000 on some wheels for a car that would have been worth no more than about $2000. Then he told me they were copies. I went down to the local wheel joint and asked about them and what other Pre-AU Wheels they could get in. I ended up ordering some AU II’s. When I went to get them fitted, the guy at the shop says he also got some BA XR8 rims in as well, so we put them both up against my car to see which I liked better. I was 18 at the time, the BA’s were a bit shinier, so I chose them! Haha. But still love the AU II’s.

by **EFFalcon** » June 7th, 2013, 11:20 am

AU II's rock

by **apoc** » June 7th, 2013, 12:21 pm

Disappointed I wasn't around for that iteration of FALCN6! Looks sweet!

by **LUVSIT** » August 14th, 2013, 8:41 pm

Well its been a little while since ive updated my showroom thred.
Some might know wombi90 (Justin Forbes) from here, well he sold his el xr6 and i was lucky enough to grab the koni yellows from him that he had in the xr.
My car has such better ride now!

Also I ordered the ice ignition system and some new spark plugs through Paul CVE

While I was at it I got a j3 chip and tune through Paul CVE and tuned by Paul at hallam performance on there new dyno. Pretty happy for pretty much a stock xr to make 141rwkw

by **tqure** » August 14th, 2013, 11:42 pm

great work mate, def need to grab myself some koni's

by **LUVSIT** » August 15th, 2013, 9:16 am : **AdamF Likes this post**

tqure wrote:great work mate, def need to grab myself some koni's

haha yeee there good. A lot of people are going coilovers now because there just as expensive to buy brand new.
But at the moment I'm happy with the koni yellows and sits nice too with king spring SSL.

by **LUVSIT** » August 15th, 2013, 9:43 am

by **TechXR** » August 15th, 2013, 7:09 pm

That's mint as :thumbsup:

by **LUVSIT** » August 16th, 2013, 3:19 pm

TechXR wrote:That's mint as

Haha thanks mate. She's getting there slowly

by **Chargd** » August 16th, 2013, 6:44 pm

where did you get those caps for the rocker cover bolts?

by **LUVSIT** » August 16th, 2013, 9:17 pm

Chargd wrote:where did you get those caps for the rocker cover bolts?

Cranbourne autobarns brah

Who is online