Show us your Engine bay thread!

by **mad_keen** » July 21st, 2011, 8:56 am

BA xr6t block half full of block filler and the best of the best of everything else

and thanx to my prep skills a sexc rocker cover

by **XR_Lightning** » July 21st, 2011, 4:33 pm

^^
HOTTEST LOOKING DOHC!!! :good:

loving the pulley setup & rocker cover!

by **mad_keen** » July 21st, 2011, 7:49 pm

XR_Lightning wrote:^^
HOTTEST LOOKING DOHC!!!

loving the pulley setup & rocker cover!

Aiming for 1300rwhp so ill post dyno run vids once its done :drinks2:

by **Customxg** » July 22nd, 2011, 12:13 pm

This is my engine in my xg

by **SnyperEB** » July 22nd, 2011, 12:48 pm

mad_keen wrote:
XR_Lightning wrote:^^
HOTTEST LOOKING DOHC!!!

loving the pulley setup & rocker cover!

Aiming for 1300rwhp so ill post dyno run vids once its done

1300 = 970rwkw! Wooow

by **mad_keen** » July 22nd, 2011, 4:55 pm

EBGLT wrote:
mad_keen wrote:
XR_Lightning wrote:^^
HOTTEST LOOKING DOHC!!!

loving the pulley setup & rocker cover!

Aiming for 1300rwhp so ill post dyno run vids once its done

1300 = 970rwkw! Wooow

Haha yep . Well no expense was spared. Only way this engine is breaking is if the head lifts off the block.

by **XR_Lightning** » July 22nd, 2011, 4:59 pm

mad_keen wrote:
XR_Lightning wrote:^^
HOTTEST LOOKING DOHC!!!

loving the pulley setup & rocker cover!

Aiming for 1300rwhp so ill post dyno run vids once its done

crazy dude! ill be hanging for that!

by **EBOOST** » July 22nd, 2011, 5:14 pm

Thats nuts but that turbo doesnt look big.enough to support that power what is it?
cheers josh.

by **mad_keen** » July 22nd, 2011, 5:16 pm

Only 1 of 100 made. 1 of 2 in Aus apparently. HKS T62R Signature.

by **mad_keen** » July 23rd, 2011, 5:33 pm

LOve that!!

by **EF ECTIV** » July 23rd, 2011, 8:32 pm

mad_keen wrote:BA xr6t block half full of block filler and the best of the best of everything else and thanx to my prep skills a sexc rocker cover

Is their a build thread of this somewhere? Need more details...

by **mad_keen** » July 23rd, 2011, 9:09 pm

Umm its my brothers car. He's not a forum person. I can make one i guess. Got alot of pics. Talkin to him today he reckons itll only make 1100rwhp. But he said itll defintiely be a 1000hp car. Wont see it making 1000 on one dyno then 900 on the next. He builds rank cars for a living. Did all the work on this up until the guy moved recently http://www.youtube.com/watch?v=0d9DTkkOKWo

by **thebeast.** » July 24th, 2011, 1:26 am

Customxg wrote:This is my engine in my xg

is there a reason the pod is sitting over the hottest part of the entire car??

by **misk** » July 24th, 2011, 2:36 am

EBOOST wrote:Thats nuts but that turbo doesnt look big.enough to support that power what is it?
cheers josh.

apparently its a 1100-1250hp turbo. 80mm comp wheel and what not, so will be interesting to see the outcome...

by **EBOOST** » July 24th, 2011, 11:14 am

Still very impressive mate and misk thatd be engine hp not rw yeah?
and i agree itll be very interesting.
make a build thread for him!!!
cheers josh.

by **Customxg** » July 24th, 2011, 2:19 pm

thebeast. wrote:
Customxg wrote:This is my engine in my xg

is there a reason the pod is sitting over the hottest part of the entire car??

Yer cause I had to relocate the coolant bottle cause of the manifold cause the intake is to hight its only an xg falcon there isnt as much room in the bay like an ef el but where the pod is there is xb bonnet flutes and it sits right under it

that's the bonnet it sits under gets heaps more cold air rather then sitting behind a light

by **LOWWED** » July 24th, 2011, 3:54 pm

its a sad sight to look out but once its done should hopefully be one of the cleanest e-series engine bays

by **EF ECTIV** » July 24th, 2011, 10:47 pm

LOWWED wrote:its a sad sight to look out but once its done should hopefully be one of the cleanest e-series engine bays

will be keeping a close eye on it if thats the case

by **Trav199** » September 13th, 2011, 6:14 pm

here is my engine

not in the bay yet haha

by **SnipeZ** » September 13th, 2011, 7:07 pm

LOWWED wrote:its a sad sight to look out but once its done should hopefully be one of the cleanest e-series engine bays

Defnetly got alot of mint bays to surpass.
Good luck.
EF ECTIV bay has gotta be top 5 easily or even best.
Love it so much

by **sikwags_218** » September 14th, 2011, 7:05 am

Here's mine just freshly sprayed. Hopefully soon it will be together. Have welded up all the holes which arent required and smoothed it

by **markr154** » September 14th, 2011, 8:06 am : **SLO4LT Likes this post**

Mine where it was..

And where it's headed now..

by **xf.693** » September 20th, 2011, 9:59 pm

xh ina xf

by **huggiebear** » September 20th, 2011, 10:13 pm

only thing needed is the under bonnet painted. looks great

by **ed_fairmont_turbo** » September 20th, 2011, 11:18 pm

Here's my baby

by **XR_Lightning** » September 26th, 2011, 5:34 pm

ed_fairmont_turbo wrote:Here's my baby

by **dylan2250** » December 4th, 2011, 9:10 pm

working project, ed falcon futura

by **huggiebear** » December 4th, 2011, 9:33 pm

needs less heat shield paint and more rockercover paint. to be honest it doesnt need the 4.0 on there as its written on the top of the motor itself

by **dylan2250** » December 4th, 2011, 10:23 pm

yeah your right mate i just bought the car the guy befor did that. i was thinking a pointing the rocker cover black

by **SLO4LT** » December 12th, 2011, 7:07 pm

Trav199 wrote:here is my engine not in the bay yet haha

That's awesome!!! :cool:

Another pic like XR_Lightnings from boosted c4c!

by **ClassicAU** » December 14th, 2011, 1:53 pm

by **BLKPHN** » December 14th, 2011, 2:40 pm

Looks great Ev!

by **ClassicAU** » December 14th, 2011, 3:01 pm

Thanks heaps Tristan, glad the master of sartorial elegance approves!

It goes a hell of a lot better than it looks too, I’ll have to get you to show me how to drive it properly some time!

by **krazyea** » December 14th, 2011, 3:47 pm

My old turbo setup has now been sold still have the ef engine to go in the new ed
Motor with turbo kit

Here's the bay ATM with the old motor witch ef one will replace

by **XR_Lightning** » December 14th, 2011, 5:39 pm

ClassicAU wrote:

mmm... the way windsor's are ment to look!

by **TechXR** » December 15th, 2011, 11:35 am

I should probably wash the engine bay...

Here's mine, still need to make something up for the pod.

Who is online