My Supra.

Introduce yourself and your ride.

My Supra.

Postby proey » October 25th, 2013, 5:52 pm : Bipolar, nstg8a Likes this post

Hi all. I thought I should introduce myself. I've been reading and gathering info on here for a while. My name is Glenn I live in Newcastle. My daily is a hilux(tow vehicle). While my better half drives a series 3 AU Wagon. Basically stock except for the Lovells springs and shocks and the 17 inch wheels. The main reason for my interest here is my race car. Up until 12 month ago I was racinig an Escort Sports Sedan in the NSW Championship. Then the oportunity to buy a space frame car came up. So the Escort was sold and the supra was bought. It came with all the bits to make it a roller but no engine or gearbox. Yep I know what you are thinking. What is he doing on here with a supra? Let me explain. Being bit of a Ford nut and hearing about the Barra's making big power and wanting to be a bit different I started looking into a turbo 6. Class rule limit turbo engine size to 3.529L. So I started looking at the 3.2 from the EA. Then I found the 221 with its 87.88mm crank. So together with 200ci rods, Au pistons and a EA block bored to suit it comes in just under the class limit. Also because I wanted to prove this could be done and I'm on the tightest of tight budgets the motor was put together from second hand parts. I've had a couple of issues along the way. This year has been a learning year. Also being on such a tight budget my development gets done at the race meeting. Anyway thats the short version. So look past the fact its a supra and remember it's powered by a Falcon motor.


Image

Image

Image
User avatar
proey
Idling
 
Posts: 59
Joined: May 17th, 2012, 1:41 pm
Location: Newcastle
Has Liked: 0 time
Been Liked: 3 times

Re: My Supra.

Postby markr154 » October 25th, 2013, 6:25 pm

Very nice!! Power figure?
Hot Chilli Red EL XR6, 5-spd manual, with BF F6 TYPHOON motor and supporting mod's, 3" exhaust etc etc.
298 rwkw @ 12 psi with re-tune likely.
My car here: http://www.pertheseries.com/forums/inde ... entry84622
NOW BOOSTED ...BF TYPHOON STYLE !!!
User avatar
markr154
Cruising
 
Posts: 428
Joined: December 21st, 2007, 7:50 pm
Has Liked: 2 times
Been Liked: 29 times

Re: My Supra.

Postby private9 » October 25th, 2013, 6:58 pm

That's really cool!
Image
User avatar
private9
Hitting N2O
 
Posts: 3388
Joined: August 13th, 2007, 7:58 pm
Location: Not in the diner Alf, not in the diner...
Has Liked: 4 times
Been Liked: 185 times

Re: My Supra.

Postby Bob Lablaw » October 25th, 2013, 6:59 pm

love this sort of build, what ecu are you running and whats your rev limit you set, keep up the updates
245rwkw @ 8psi EF Fairmont- HX35 turbo, 42lb lucas injectors, 45mm wastegate, owner made exhaust manifold cooler piping, port and polish, 3" exhaust, super lows, 17x8.5 ROH z's, shift kit, XR8 bulge and extra vents, slotted rotors, J3 boost tune, wrx seats, wideband.... brake upgrade to come
User avatar
Bob Lablaw
Spooling Up
 
Posts: 507
Joined: September 4th, 2009, 6:49 pm
Location: Rotorua, NZ
Has Liked: 17 times
Been Liked: 30 times

1996 Ford Fairmont Ghia

Re: My Supra.

Postby proey » October 25th, 2013, 7:08 pm

Still yet to get it on the Dyno. I've been doing my tuning at the track. Wouold be happy with anything over 400rwhp. The Escort had over 300rwhp and this feels lots stonger.
User avatar
proey
Idling
 
Posts: 59
Joined: May 17th, 2012, 1:41 pm
Location: Newcastle
Has Liked: 0 time
Been Liked: 3 times

Re: My Supra.

Postby proey » October 25th, 2013, 7:16 pm

Cheers guys ECU is a megasquirt 3. Rev limit is set at 6500. It's on the conservative side as there is no history of this combination. I would like to think 7000 to 7500 would be safe for the bottom end but not sure about the rockers?
User avatar
proey
Idling
 
Posts: 59
Joined: May 17th, 2012, 1:41 pm
Location: Newcastle
Has Liked: 0 time
Been Liked: 3 times

Re: My Supra.

Postby proey » October 25th, 2013, 7:27 pm

For more info on Sports Sedans go here.

NSW Sports Sedans

Pro Motorsport
User avatar
proey
Idling
 
Posts: 59
Joined: May 17th, 2012, 1:41 pm
Location: Newcastle
Has Liked: 0 time
Been Liked: 3 times

Re: My Supra.

Postby NUT347 » October 25th, 2013, 8:03 pm

That's awesome!!!
NUT347
Melting Pistons
 
Posts: 7553
Joined: June 22nd, 2008, 7:09 pm
Location: Brisbane
Has Liked: 911 times
Been Liked: 1254 times

Re: My Supra.

Postby Rollin » October 25th, 2013, 8:10 pm

Yeah I like it :D

What do you think about the 221 crank? Is it just straight out of an early falcon and it went straight in...?

What intake manifold and PCV setup are you using? Looks like it had a little hiccup from your FB page :/
Last edited by Rollin on October 25th, 2013, 8:14 pm, edited 1 time in total.
Image

Look at your car. Now back to mine. Now back to yours. Now back to mine. Sadly, yours isn't mine. But if you stopped buying dodgy cars and bought an ED, yours could be like mine. Look down. Back up. Where are you? ...You're on BoostedFalcon, reading the signature your signature could be like! Anything is possible when your car looks like my car... I'm on a computer.
User avatar
Rollin
Melting Pistons
 
Posts: 7933
Joined: July 15th, 2007, 4:35 pm
Location: Brisbane - Driving around in a metal and glass case of emotion!
Has Liked: 327 times
Been Liked: 751 times

1994 Ford Falcon

Re: My Supra.

Postby Frodo » October 25th, 2013, 8:13 pm

This is a very interesting combination. Good to see people are still thinking outside the box
BA XR8 with 238rwkw. PB 13.8 @ 103mph
Frodo
Idling
 
Posts: 11
Joined: December 2nd, 2008, 9:39 am
Has Liked: 5 times
Been Liked: 0 time

2004 Ford XR8

Re: My Supra.

Postby proey » October 25th, 2013, 9:17 pm

Rollin wrote:Yeah I like it :D

What do you think about the 221 crank? Is it just straight out of an early falcon and it went straight in...?

What intake manifold and PCV setup are you using? Looks like it had a little hiccup from your FB page :/


Crank Is almost a direct swap. Yep from an XT. 1968-69 falcon. I like it because of the stroke but I would prefer billet or forged. Inlet is the log manifold. Reusing pistons was the problem. One was weakened when being removed from the AU rod. Won't be doing that again. I've Also stripped the teeth off the oil pump drive to idler gear. Is this a known weakness?

Image
User avatar
proey
Idling
 
Posts: 59
Joined: May 17th, 2012, 1:41 pm
Location: Newcastle
Has Liked: 0 time
Been Liked: 3 times

Re: My Supra.

Postby Rollin » October 25th, 2013, 9:34 pm

I don't recall seeing others on here rip teeth off the pump drive, but apparently they have problems with the auxillary drive wearing out in the front of the block - I noticed when building the motor for our car that the front main bearing can obscure or partially obscure the oil supply to the aux shaft if the hole isn't drilled in the right place. Something to check when you put it back together.

Make sure you run a catch can for the breathers (if they are being re-routed back into the intake) because in some situations it's possible to hydraulic number 6 and/or 5 by filling the manifold full of oil.
Image

Look at your car. Now back to mine. Now back to yours. Now back to mine. Sadly, yours isn't mine. But if you stopped buying dodgy cars and bought an ED, yours could be like mine. Look down. Back up. Where are you? ...You're on BoostedFalcon, reading the signature your signature could be like! Anything is possible when your car looks like my car... I'm on a computer.
User avatar
Rollin
Melting Pistons
 
Posts: 7933
Joined: July 15th, 2007, 4:35 pm
Location: Brisbane - Driving around in a metal and glass case of emotion!
Has Liked: 327 times
Been Liked: 751 times

1994 Ford Falcon

Re: My Supra.

Postby proey » October 25th, 2013, 9:46 pm

Yeah I read here about the oil feed. I modded the hole to give better oil flow. Even the one I have in now is showing signs of wear.

I run breathers to a catch tank so no worries about filling the manifold with oil.
User avatar
proey
Idling
 
Posts: 59
Joined: May 17th, 2012, 1:41 pm
Location: Newcastle
Has Liked: 0 time
Been Liked: 3 times

Re: My Supra.

Postby TUFED6 » October 26th, 2013, 9:24 am

Man what an interesting combo! Will be interesting to hear what the power delivery is like at 3.5L and if it changes the spread of power/torque
User avatar
TUFED6
Full Boost
 
Posts: 2926
Joined: July 13th, 2007, 12:21 pm
Location: I put the fuk into shima
Has Liked: 2 times
Been Liked: 434 times

1994 Ford Falcon

Re: My Supra.

Postby kwikxr » October 26th, 2013, 9:44 am

Very cool build! Interesting engine combo, good stuff :thumbsup:
Fun hack / Project - '95 EF Fairmont Turbo Link
Daily hack / Cruiser - '97 EL Fairmont Ghia Link
User avatar
kwikxr
Cruising
 
Posts: 458
Joined: February 17th, 2008, 7:47 pm
Location: Auckland, NZ
Has Liked: 90 times
Been Liked: 45 times

1995 Ford Fairmont

Re: My Supra.

Postby ed40 » October 26th, 2013, 12:01 pm

I'm in love, I'd really like to see the dyno graph for this car when/if it's ever dynoed.

I have always been curious to see how a 3.2 with boost would go.

JZ<4L
Rollin wrote:At least I can deal with it while driving my boyfriend around in my car each weekend
User avatar
ed40
Breaking Traction
 
Posts: 1861
Joined: August 23rd, 2007, 8:39 pm
Location: Perth, WA
Has Liked: 191 times
Been Liked: 137 times

1994 Ford Falcon

Re: My Supra.

Postby proey » October 26th, 2013, 8:52 pm

Thanks for your comments guys. I will definitely post up Dyno figures once its done.
User avatar
proey
Idling
 
Posts: 59
Joined: May 17th, 2012, 1:41 pm
Location: Newcastle
Has Liked: 0 time
Been Liked: 3 times

Re: My Supra.

Postby misk » October 26th, 2013, 8:57 pm

whats the actual bore x stroke now?
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger

soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing

XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities :)
User avatar
misk
Melting Pistons
 
Posts: 10047
Joined: October 14th, 2008, 10:31 am
Location: dandenong
Has Liked: 298 times
Been Liked: 295 times

Re: My Supra.

Postby proey » October 26th, 2013, 9:27 pm

Bore and stroke are 92.26 by 87.88. I'm also on the lookout for a 3.9 block that is good enough to bore to 92mm.
User avatar
proey
Idling
 
Posts: 59
Joined: May 17th, 2012, 1:41 pm
Location: Newcastle
Has Liked: 0 time
Been Liked: 3 times

Re: My Supra.

Postby SNR » October 27th, 2013, 10:31 am

This is cool.

Great to hear there's an option other than finding an EA 3.2 (which I've also been looking for for some time!)

What cam are you using?
Straights are for fast cars... Turns are for fast drivers

http://www.flickr.com/photos/silencer_rh - View My Photos on Flickr.com
http://www.boostedfalcon.net/viewtopic.php?f=3&t=7390 - My EBII Fairmont Sickmachine.
http://www.e21build.com - My BMW E21/Ford 4.0 I6 Drift/Rally Project Car
SNR
Full Boost
 
Posts: 2830
Joined: July 19th, 2007, 6:47 pm
Location: Warrnambool, VIC
Has Liked: 174 times
Been Liked: 100 times

Re: My Supra.

Postby proey » October 27th, 2013, 7:28 pm

Ok thought I had better post up some engine details

EA Block Bored to 92.26.
EA log inlet manifold.
044 pump, 650cc injectors
221 Crank.
200ci Rods shot peened ARP bolts.
AU pistons
AU head Mild port job. Standard Cam (for now)
AU girdle
AU oil pump. Pressure relief blocked.
Remote oil filter, cooler and pressure reg.
EA Sump modded, 8 liter capacity
T04 Turbo.
Turbosmart Progate 50 wastegate.
6 into 2 into 1 manifold using standard exhaust and 2.5inch steam pipe.
Three inch dump into 4 inch exhaust.
221 flex plate
QuaterMaster 7.25 twin plate clutch mounted on a custom adapter.
EA bellhousing
T56 mounted by a adapter plate.
Remote custom shifter.

Boost set at 16psi. Before fitting the Progate boost would creep up above 20psi.

Independent 9 inch rear end.
Max spool 4.5 ratio

Cheers
Glenn
User avatar
proey
Idling
 
Posts: 59
Joined: May 17th, 2012, 1:41 pm
Location: Newcastle
Has Liked: 0 time
Been Liked: 3 times

Re: My Supra.

Postby Jayedxr6 » October 29th, 2013, 8:18 pm

Just a tip mate, the later 91DA log inlet manifolds (eb2-ed) out flow the ea manifold. By a bit im told.....
Absolutely love the combo, cant wait too see a dyno sheet.
Xh falcon turbo. 420rwhp 16 psi.
User avatar
Jayedxr6
Breaking Traction
 
Posts: 1954
Joined: November 26th, 2011, 6:40 pm
Has Liked: 179 times
Been Liked: 149 times

1994 Ford ED Falcon XR6

Re: My Supra.

Postby TUFED6 » October 29th, 2013, 8:38 pm

Did you really block off the oil pump pressure relief? That might explain why it stripped the pump gears
User avatar
TUFED6
Full Boost
 
Posts: 2926
Joined: July 13th, 2007, 12:21 pm
Location: I put the fuk into shima
Has Liked: 2 times
Been Liked: 434 times

1994 Ford Falcon

Re: My Supra.

Postby proey » October 29th, 2013, 8:43 pm : Jayedxr6 Likes this post

Jayedxr6 wrote:Just a tip mate, the later 91DA log inlet manifolds (eb2-ed) out flow the ea manifold. By a bit im told.....
Absolutely love the combo, cant wait too see a dyno sheet.


Cheers for that. All bits of info like this are great.
User avatar
proey
Idling
 
Posts: 59
Joined: May 17th, 2012, 1:41 pm
Location: Newcastle
Has Liked: 0 time
Been Liked: 3 times

Re: My Supra.

Postby proey » October 29th, 2013, 9:01 pm

TUFED6 wrote:Did you really block off the oil pump pressure relief? That might explain why it stripped the pump gears


Yeah but I run a peterson remote pressure relief valve. I did have the pressure set at 80psi. A bit high. I'm used to the SR20 and the Cosworth from the Escort. Thats what I used to run on them but they would rev to 9000. I now have it set to 60psi and there a wear marks on the teeth.

The Escort block has a very sinmilar setup and it ran 80psi for years without problem.

Image

Image
User avatar
proey
Idling
 
Posts: 59
Joined: May 17th, 2012, 1:41 pm
Location: Newcastle
Has Liked: 0 time
Been Liked: 3 times

Re: My Supra.

Postby TUFED6 » October 29th, 2013, 9:17 pm

proey wrote:
TUFED6 wrote:Did you really block off the oil pump pressure relief? That might explain why it stripped the pump gears


Yeah but I run a peterson remote pressure relief valve. I did have the pressure set at 80psi. A bit high. I'm used to the SR20 and the Cosworth from the Escort. Thats what I used to run on them but they would rev to 9000. I now have it set to 60psi and there a wear marks on the teeth.

The Escort block has a very sinmilar setup and it ran 80psi for years without problem.

Image

Image


Ah right. Yeah 80 is pretty high. I'd be pretty worried about putting extra load on those gears if you look at them they aren't very beefy.


Sent from my iPad using Tapatalk HD
User avatar
TUFED6
Full Boost
 
Posts: 2926
Joined: July 13th, 2007, 12:21 pm
Location: I put the fuk into shima
Has Liked: 2 times
Been Liked: 434 times

1994 Ford Falcon

Re: My Supra.

Postby proey » December 23rd, 2013, 10:49 am

Rollin wrote:Yeah I like it :D

What do you think about the 221 crank? Is it just straight out of an early falcon and it went straight in...?

What intake manifold and PCV setup are you using? Looks like it had a little hiccup from your FB page :/


Here are some pictures of a EA, 200ci and 221 crank. Main differences are the balancing wieghts, rear main seal and flywheel bolt pattern of the 221.
Image

Image

Image
User avatar
proey
Idling
 
Posts: 59
Joined: May 17th, 2012, 1:41 pm
Location: Newcastle
Has Liked: 0 time
Been Liked: 3 times

Re: My Supra.

Postby EFFalcon » December 23rd, 2013, 11:04 am

I missed this... love the idea.
1995 Falcon GLi | 1997 EL GT | 1995 Falcon Futura | 1983 Thunderbird Heritage | 2003 Fairmont Ghia
User avatar
EFFalcon
Site Admin
Site Admin
 
Posts: 14797
Joined: June 4th, 2007, 8:26 pm
Location: Carrum Downs
Has Liked: 26 times
Been Liked: 766 times

1995 Ford Falcon

Re: My Supra.

Postby proey » January 28th, 2016, 2:47 pm

On the dyno again getting ready for the support races at the 12h. 16psi. should do nicely for now.

Image
User avatar
proey
Idling
 
Posts: 59
Joined: May 17th, 2012, 1:41 pm
Location: Newcastle
Has Liked: 0 time
Been Liked: 3 times


Return to Introduction

Who is online

Users browsing this forum: No registered users