PROJECT -{KIL HSV}-

by **danbode** » July 14th, 2008, 12:40 pm

Nah thats cool i just wanted a rough price, i have a tickford one i want to get done similar.
Thanks

Daniel

by **Dezza** » July 14th, 2008, 12:55 pm

Glad you're happy with the grille. It's come up well with the paint. Good job.

by **KIL HSV** » July 14th, 2008, 4:43 pm

Dezza wrote:Glad you're happy with the grille. It's come up well with the paint. Good job.

thanks again dude, and the paint job was just with a can just i rough spray job, just wonted to make sure it suited the car,

by **Dezza** » July 14th, 2008, 5:47 pm

KIL HSV wrote:
Dezza wrote:Glad you're happy with the grille. It's come up well with the paint. Good job.

thanks again dude, and the paint job was just with a can just i rough spray job, just wonted to make sure it suited the car,

half my bodykit was done with a can! lol. That looks better than anything I've painted.

by **KIL HSV** » July 14th, 2008, 6:14 pm

Dezza wrote:
KIL HSV wrote:
Dezza wrote:Glad you're happy with the grille. It's come up well with the paint. Good job.

thanks again dude, and the paint job was just with a can just i rough spray job, just wonted to make sure it suited the car,
half my bodykit was done with a can! lol. That looks better than anything I've painted.

lmao dude hahahahaha thanks man now i feel better, lol.
nah it will get painted properly thought this was just a test.

by **TEaaron** » July 16th, 2008, 4:43 pm

Hey mate if you're after something to make your 3 gauges in the dash look a bit neater shoot me over some diminsions and I'll see what I can do.

I made this for mine.

by **KIL HSV** » July 16th, 2008, 7:04 pm

TEaaron wrote:

Hey mate if you're after something to make your 3 gauges in the dash look a bit neater shoot me over some diminsions and I'll see what I can do.

I made this for mine.

Thanks man, the gauges are just sittng there there not connected yet dude, how much will it cost???

by **TEaaron** » July 16th, 2008, 8:37 pm

Depends really on exactly what you want.

I can make it out of Mild steel, Zinc anneal, Galvinzed steel, Aluminium, Stainless steel.

It will be fully CNC'd.

Pm me over a hand sketch or something with dimensions and I'll get back to you.

by **GJTuddy** » July 18th, 2008, 11:32 am

TEaaron's work is top notch. Those gauges sitting there will tie nicely in with the seats which is good by the way. Although, don't let your dash area become overcrowded like the cockpit an aurcraft. The way it looks now, sweet.

by **KIL HSV** » July 18th, 2008, 7:43 pm

yeh i noo i dont want it over crowded to but i need to no what my engine is doing dude, like this im aware of whats happening,
That engine cost me $20,000 and thats my labour work imagine how much it would have cost me taking it to a work shop, there`s alot of custom stuff in there and i aint risking it.

by **tickie** » July 24th, 2008, 10:39 pm

KIL HSV wrote:
tickie wrote:hey mate nice ride. fantastic detail in the engine bay and im loving the xr seats in it. Hey where abouts in sydney you from bro?

Thanx man, i live in arncliffe about 10 from hurstville.were you from dude?

Cool no probs bro i cant wait to see the finished product. Im from Rouse Hill. where abouts do you work bro?

by **KIL HSV** » July 29th, 2008, 5:36 pm

tickie wrote:Cool no probs bro i cant wait to see the finished product. Im from Rouse Hill. where abouts do you work bro?

I work for railcorp/cityrail as a contractor so im all over the place.

by **DA22LE** » August 11th, 2008, 9:07 pm

Hey,

Car's coming along nicely mate. Plenum will look sweet as all polished up. I have to see about getting some of my bits polished up, when i get a spare moment ( decide to take a day off )...lol

Cheers

Daz

by **KIL HSV** » August 12th, 2008, 12:21 am

DA22LE wrote:Hey,

Car's coming along nicely mate. Plenum will look sweet as all polished up. I have to see about getting some of my bits polished up, when i get a spare moment ( decide to take a day off )...lol

Cheers

Daz

Lmao yeh mna thats my problem to, to busy with work.

by **KIL HSV** » February 5th, 2009, 9:50 pm

UPDATE:

I bought a custom fuel tank, it has build-in surge and baffouls through out the tank(think thats how you spell it lol)
Here are some pictures of it out of the car but ill have to some pictures mounted in.
Also attached to it are 2 bosch 044`s.

by **BLCKED** » February 5th, 2009, 10:05 pm

nice car mate, coming along great.

how much did the fuel tank set you back and how many litres is it rated to? looks tough as.

also how hard was the BA front seat conversion, any tips on that? (mate of mine might be attempting it soon)

keep up the good work.

by **KIL HSV** » February 5th, 2009, 11:30 pm

also the i finished grinding back the welds on the plenum and polished it, its now at the chromers and hoping to get it back in the next couple of days,
here are some pic`s of the plenum polished..

by **KIL HSV** » February 5th, 2009, 11:42 pm

BLCKED wrote:nice car mate, coming along great.

how much did the fuel tank set you back and how many litres is it rated to? looks tough as.

also how hard was the BA front seat conversion, any tips on that? (mate of mine might be attempting it soon)

keep up the good work.

Thanks man,

the fuel tank cost me $300 buks but it cost the guy i bought it off $1800 to build it,

, the fuel tank is a 75L and the reason why the back part of the tank is black is when its mounted on the car it looks like a sleeper and not as noticable. ill have more picks of how it been mounted and how ive done the fuel lines.

as for the seats, there was a bit of fucking around but that because i was using a arch welder,(wish i had a tig welder, gona by one soon after im finish the car) lmao thats all i had but took me a bit of time but looks sick, ill have more picture of how the gauges come up, the new carpet with the ba seat in the car. now i just gotta work out how to do my back seats,for the back rest im think just hard mounting it, but id like it to open like the original seat but once again only have a arch welder

just wish i had the correct tools then ill make everything faster and better, and the part you sit on will be a hassell as it is lower than the standard ea seat and the mounts are in a different position,and for the sides ill just take the cloth of the ba ones and put it on the ea ones.
i roughly just mounted the ba seat in the back and they are a perfect fit it just the mounting points are in a different position, spuing hard.

by **SnipeZ** » February 6th, 2009, 7:22 pm

bloody nice build mate.
absolutly love it.
keep it up

by **EB_GLI92** » February 6th, 2009, 7:34 pm

nice car
how long till you have it on the road??

by **rab** » February 6th, 2009, 8:37 pm

looking real good.. interior stuff isnt real important.. as long as its comfy and goes like stink on shit ! 8-)

by **ed xr6** » February 7th, 2009, 11:47 am

did u get the engine rebilt mate im thinking of getting mine done how much did it cost u

by **KIL HSV** » February 7th, 2009, 2:35 pm

EB_GLI92 wrote:nice car
how long till you have it on the road??

Im hoping to get it running by the end of the month,

by **KIL HSV** » February 7th, 2009, 2:38 pm

ed xr6 wrote:did u get the engine rebilt mate im thinking of getting mine done how much did it cost u

Yeah, done the lot engine and head cost me $10,000

by **KREATTD** » March 25th, 2009, 4:18 pm

I'm loving it champ, this will certainly KIL 99% of HSV's on the road! top stuff

by **KIL HSV** » March 25th, 2009, 5:36 pm

thanks alot dude and i hope you built one faster and will beat the hole 100% percent of them

by **KIL HSV** » March 25th, 2009, 5:38 pm

KIL HSV wrote:
ed xr6 wrote:did u get the engine rebilt mate im thinking of getting mine done how much did it cost u

Yeah, done the lot engine and head cost me $10,000

And thats me putting it togeter not a performance lmao,
imagine how much more it would have been.

by **DA22LE** » March 25th, 2009, 5:54 pm

KIL HSV wrote: as for the seats, there was a bit of fucking around but that because i was using a arch welder,(wish i had a tig welder, gona by one soon after im finish the car)

Mate,

I got a tig welder, i could help you out if you like..........

Plenum looks real nice, roughly the size of mine i fabbed up. Coming along nicely..

Cheers

Daz

by **KIL HSV** » March 25th, 2009, 6:06 pm

thanks alot man but all the welding is fucking done for ffs, lmao but thats for offering but i mite be needing you so i can make my bro`s plenium for his ba.

man if you want some ideas for you car your more than welcome to come and have alook when your free, and when im free lol.

by **KIL HSV** » March 25th, 2009, 6:09 pm

here are some up date pics of the car, now just to do the wireing and a few vacum lines,
oh and the the fuel lines in the enging bay. and take her to the tuners.

by **e series falcon** » March 25th, 2009, 6:14 pm

wat hp u hopeing for

by **justa6** » March 25th, 2009, 6:14 pm

first time i've seen this, mad build. look's like the dude welding the fuel tank had some fun. can't wait to see it running.

by **KIL HSV** » March 25th, 2009, 6:22 pm

450rwkw and over

by **KIL HSV** » March 25th, 2009, 6:25 pm

justa6 wrote:first time i've seen this, mad build. look's like the dude welding the fuel tank had some fun. can't wait to see it running.

lol, yeh man glad i didnt do it, it costed the previous owne 1800 buks and i got it for 300 :grin:

by **DA22LE** » March 25th, 2009, 7:20 pm

KIL HSV wrote:thanks alot man but all the welding is fucking done for ffs, lmao but thats for offering but i mite be needing you so i can make my bro`s plenium for his ba.

man if you want some ideas for you car your more than welcome to come and have alook when your free, and when im free lol.

Thanks man, that'd be frickin awesome........hows this weekend??....lol

Cheers

Daz

by **KIL HSV** » March 25th, 2009, 8:32 pm

maybe sunday, buzz me dude, you gona bring you car id like to look at that to?
0421 745 925 buzz me
steve

by **XR6TIM** » March 27th, 2009, 7:45 pm

Engine bay looks mint dude should go hard as...

by **KIL HSV** » March 30th, 2009, 2:27 am

thanks dude just hope its gona go harder than it looks, lmao.

by **glenneaux** » March 30th, 2009, 7:46 am

Steady wrote:Breeze?

I was washing it today, and the sun suddenly came out, car went from that greeny colour to blue right in front of my eyes, trippy as.

and you jizzed. in. your pants.

by **KIL HSV** » March 30th, 2009, 9:06 am

hahahaha

Who is online