WTF

This is a general discussion forum, open to all participants

WTF

Postby Hiboost » September 16th, 2007, 8:37 pm

ok... at the start of yr i purchased a turbo manifold (log) off e-bay... from someone (ozpsiperforamnce) and in the middle of the ebay page it had -Boosted Roo- and after i installed the manifold....
approx 4hrs driving (normal) the manifold cracked...i sent it back and they reapired it and sent it back out to me...
at this stg i was getting the XTC ems From Nick installed... (manifold was put bac on) nick stated car up and after a few start ups later it cracked again, then nick took it back out and welded the cracked up... put it back on and what now the head flage was FU%ked...was leaking from cyl 6 so i got nick to do a quick road tune for the ecu and drove it home.
i pulled it off and sent the manifold and they said we are awaiting for the new 12mm head plate and its been over 1.5 months and no new and they will not answer phone call...and they have not sent my manifold back....

and a pics of the mnaiofld

Image

so i was told that Ozpsiperofrmance+ Boosted Roo= Snort perforamnce? so i really dont kno what to do and ideas?
Last edited by Hiboost on September 16th, 2007, 9:08 pm, edited 1 time in total.
4LTR-JET: 9.1@ 150mph!!



Check out our new revamped website!
http://www.turbologicracing.com.au/
Image
User avatar
Hiboost
Breaking Traction
 
Posts: 1951
Joined: August 23rd, 2007, 10:11 am
Has Liked: 11 times
Been Liked: 24 times

1997 Ford EL

Re: WTF

Postby TUFED6 » September 16th, 2007, 9:01 pm

You'd have to be pretty pissed about that!

I don't know the answer to your question, but out of interest what material was the manifold made out of?
User avatar
TUFED6
Full Boost
 
Posts: 2926
Joined: July 13th, 2007, 12:21 pm
Location: I put the fuk into shima
Has Liked: 2 times
Been Liked: 434 times

1994 Ford Falcon

Re: WTF

Postby Hiboost » September 16th, 2007, 9:03 pm

TUFED6 wrote:You'd have to be pretty pissed about that!

I don't know the answer to your question, but out of interest what material was the manifold made out of?



s/steel steam pipe...
4LTR-JET: 9.1@ 150mph!!



Check out our new revamped website!
http://www.turbologicracing.com.au/
Image
User avatar
Hiboost
Breaking Traction
 
Posts: 1951
Joined: August 23rd, 2007, 10:11 am
Has Liked: 11 times
Been Liked: 24 times

1997 Ford EL

Re: WTF

Postby Hiboost » September 16th, 2007, 9:06 pm

and for me to get a new manifold(tuned length) i will need to mdify the 4" dump, oil return, cooler piping for the turbo.....and it should cost me $2000
4LTR-JET: 9.1@ 150mph!!



Check out our new revamped website!
http://www.turbologicracing.com.au/
Image
User avatar
Hiboost
Breaking Traction
 
Posts: 1951
Joined: August 23rd, 2007, 10:11 am
Has Liked: 11 times
Been Liked: 24 times

1997 Ford EL

Re: WTF

Postby private9 » September 16th, 2007, 9:57 pm

Hiboost wrote:so i was told that Ozpsiperofrmance+ Boosted Roo= Snort perforamnce? so i really dont kno what to do and ideas?


Can't really comment on the rest, but I'm pretty sure that Boosted Roo are Snort. Maybe try giving Snort a call.
Image
User avatar
private9
Hitting N2O
 
Posts: 3388
Joined: August 13th, 2007, 7:58 pm
Location: Not in the diner Alf, not in the diner...
Has Liked: 4 times
Been Liked: 185 times

Re: WTF

Postby Damo » September 16th, 2007, 10:03 pm

yeah I think you some how need to get Geoffs mobile number. I know he used to post it up a lot on http://www.fordforums.com but that was years ago, everything I have read about people dealing with Geoff personally have been positive. he is the guy that started snort performance.
Damo
Full Boost
 
Posts: 2589
Joined: July 13th, 2007, 8:16 pm
Has Liked: 0 time
Been Liked: 3 times

Re: WTF

Postby Hiboost » September 16th, 2007, 10:33 pm

LOL,

these are that names i have: cheffrey, Courtney (ozpsiperformance/Boosted Roo)

so donno wdf is going on, like a big scam!!!!!
4LTR-JET: 9.1@ 150mph!!



Check out our new revamped website!
http://www.turbologicracing.com.au/
Image
User avatar
Hiboost
Breaking Traction
 
Posts: 1951
Joined: August 23rd, 2007, 10:11 am
Has Liked: 11 times
Been Liked: 24 times

1997 Ford EL

Re: WTF

Postby slo_sprint » September 16th, 2007, 11:29 pm

From what i have heard boosted roo isn't snort, their kits are copied off an earlier snort design but have nothing to do with them. Could be completely wrong though.
'97 Toyota Supra - 6Spd, Built 2J, T88H-38GK, HKS 272 Cams, Tilton Triple Plate, Haltech E11V2
User avatar
slo_sprint
Spooling Up
 
Posts: 949
Joined: July 24th, 2007, 9:54 pm
Location: Brisbane
Has Liked: 0 time
Been Liked: 2 times

Re: WTF

Postby Hiboost » September 17th, 2007, 11:44 am

CONTACT finally...i was told to expect it today.....ill c how i go...
4LTR-JET: 9.1@ 150mph!!



Check out our new revamped website!
http://www.turbologicracing.com.au/
Image
User avatar
Hiboost
Breaking Traction
 
Posts: 1951
Joined: August 23rd, 2007, 10:11 am
Has Liked: 11 times
Been Liked: 24 times

1997 Ford EL

Re: WTF

Postby Hiboost » September 17th, 2007, 11:48 am

Dansedgli wrote:Thats good to hear.

Did you ask if snort and boosted roo and ozpsiperformance were all the same people?




donno....i got that messag bank bull from snort and i have not got a phonecall back...
4LTR-JET: 9.1@ 150mph!!



Check out our new revamped website!
http://www.turbologicracing.com.au/
Image
User avatar
Hiboost
Breaking Traction
 
Posts: 1951
Joined: August 23rd, 2007, 10:11 am
Has Liked: 11 times
Been Liked: 24 times

1997 Ford EL

Re: WTF

Postby -jjM- » September 17th, 2007, 2:44 pm

Hiboost wrote:donno....i got that messag bank bull from snort and i have not got a phonecall back...

geoffs number is 0405522147, if thats the number you called then its geoff

talked to him today and said hes being going thru his messages all day because there email was down or something and phone i donno, anyway yea A+++ to geoff, hes sending my manifold out asap for me
[ROBBED] Black VX II SS 6spd
User avatar
-jjM-
Breaking Traction
 
Posts: 1035
Joined: July 13th, 2007, 1:33 pm
Location: Mooroolbark, VIC
Has Liked: 0 time
Been Liked: 0 time

Re: WTF

Postby Hiboost » September 17th, 2007, 7:52 pm

Yeay finally got the manifold....so i did my best with the porting.. on the manifold exhaust ports which is now complete and i also did some porting on the turbo housing flange, which came out great... so tomorrow ill go get the Au steel gasket, some high temp paint and then bolt it all up and drive it to XTC and get a good tune....so friday should be done...
4LTR-JET: 9.1@ 150mph!!



Check out our new revamped website!
http://www.turbologicracing.com.au/
Image
User avatar
Hiboost
Breaking Traction
 
Posts: 1951
Joined: August 23rd, 2007, 10:11 am
Has Liked: 11 times
Been Liked: 24 times

1997 Ford EL

Re: WTF

Postby Hiboost » September 17th, 2007, 8:11 pm

im gonna push it so its all done by tomorrow arvo and i want it at nick shop by weds and him to tune it in 2-3 days.....also iv got to go to VPW and get a new Muffler....and get that installed as well before nick gets the car...
4LTR-JET: 9.1@ 150mph!!



Check out our new revamped website!
http://www.turbologicracing.com.au/
Image
User avatar
Hiboost
Breaking Traction
 
Posts: 1951
Joined: August 23rd, 2007, 10:11 am
Has Liked: 11 times
Been Liked: 24 times

1997 Ford EL


Return to General Discussion

Who is online

Users browsing this forum: No registered users