YEAH, JUST ANOTHER BA XR6 TURBO

by **Kaddis** » February 6th, 2009, 6:23 pm

Looks awesome!

100% not photochoped but spring chopped?

by **LOW_XR** » February 6th, 2009, 7:49 pm

Kaddis wrote:Looks awesome!

100% not photochoped but spring chopped?

nah springs are stock height lol.

nah cant cut springs , they compresed

by **93edxr6** » February 6th, 2009, 8:00 pm

i know its not photochoped but it looks like it thats why its so cool.

by **XR6Tdan** » February 20th, 2009, 3:18 pm

one of the hottest xr6 turbos going around in vic, good work mate

by **lowghia** » February 20th, 2009, 3:44 pm

well as a BA/BF/FG hater i must say FULL KUDOS to you for the creation of the beast in this thread..

i just dont like the falcon shape after ef/el sesries as i prefer curves to boxy sides etc but yours looks awesome..

by **LOW_XR** » February 21st, 2009, 8:58 pm

cheers all. been spendin more fukin money on her.

got this 2day. getting piping to match in next 2 weeks.

by **needfordspeed** » February 21st, 2009, 9:08 pm

Fark that's mammoth, it's gonna look sick esp when you see it through the bonnet grille

by **SnipeZ** » February 21st, 2009, 9:23 pm

**** me!!

how big is that sucker?
should make a difference

by **LOW_XR** » February 21st, 2009, 9:46 pm

yeah its big for a ba its like 550 x 405 x 75.

its a plazmaman 1100 hp pro series cooler.
should give it a few extra killer wasps

by **FordFairmont** » February 21st, 2009, 9:46 pm

i didnt know mack truck parts were compatible with falcons lol

by **EF ECTIV** » February 21st, 2009, 10:31 pm

holy shit thats gonna look epic peeking thru the grill... Ive never been a fan of the off-centre
stock coolers in the turbz n phoons....

by **Phillis** » February 21st, 2009, 11:21 pm

the brick will weigh you down a bit man.

by **pHaT`eL** » February 22nd, 2009, 10:43 am

Fark me!! Very subtle Dyl

by **LOW_XR** » February 22nd, 2009, 6:37 pm

EF ECTIV wrote:holy shit thats gonna look epic peeking thru the grill... Ive never been a fan of the off-centre
stock coolers in the turbz n phoons....

yeah i dont like em, but it came with the car.

by **LOW_XR** » February 22nd, 2009, 6:39 pm

pHaT`eL wrote:Fark me!! Very subtle Dyl

lol yeah its a very subtle car pete .... bright orange , dumped and a truck cooler

by **Dansedgli** » February 22nd, 2009, 6:42 pm

Thats massive! Do you have the good rods in yours?

Everytime you drive by I want to run out and get an XR6T.

by **LOW_XR** » February 22nd, 2009, 6:51 pm

Dansedgli wrote:Thats massive! Do you have the good rods in yours?

Everytime you drive by I want to run out and get an XR6T.

lol nah i got shit rods, rated at 330 rwkw i think.

well hopefully ill be testing that in the weeks to come.

by **EFFalcon** » February 22nd, 2009, 7:02 pm

i want a cooler that big

by **Phillis** » February 22nd, 2009, 7:29 pm

EFFalcon wrote:i want a cooler that big

thats what she said. hooooooooo i went there!

do you have to hack the front bar much or will it just slide in there nicely? selling the factory one?

by **LOW_XR** » February 22nd, 2009, 8:49 pm

Phillis wrote:do you have to hack the front bar much or will it just slide in there nicely? selling the factory one?

nah front bar is fine. i can trim my bar reo a bit (2mm or so) it will go in without triming but its tight as.

all my old shit is sold already sorry man hehe.

by **LOW_XR** » February 22nd, 2009, 8:50 pm

EFFalcon wrote:i want a cooler that big

easy john.... ill take ya plenum and airbags hehe

by **EFFalcon** » February 22nd, 2009, 8:51 pm

lol... i'd have a cooler that big if it'd fit in an EF!
damn EF headlights for being so big.

by **t1MMy** » February 22nd, 2009, 9:09 pm

EFFalcon wrote:lol... i'd have a cooler that big if it'd fit in an EF!
damn EF headlights for being so big.

Solution : EF XR front.

by **charbz** » February 23rd, 2009, 8:27 pm

hey man hot car... i c u every morning pretty much driving past my job site on baronia road, hear u dosing it up the hill lol ill always b crossing the road as u cum past... looks real good mate

by **Amon** » February 24th, 2009, 6:27 pm

lol that cooler looks epic.. cant wait to see pics of it in

by **EFFalcon** » February 25th, 2009, 1:28 pm

Don't install it behind the bar.
put it infront... just tell people its a bullbar.

by **BROCKYB8** » February 25th, 2009, 1:40 pm

lOL THAT Is massive as but it will look nice. Good to see all is going well with your car

by **LOW_XR** » March 2nd, 2009, 5:56 pm

i got some more of my pipeing yesterday.

its the cold air in take from plazmaman , which i got from tristan (thanks again mate)

the silicon joiner goes on the turbo and the pipe goes under the battery then drops a pod down under the headlight and behind the fog light.

cant wait to get it on.

on the bad side i fucked my clutch and its gunna cost like $2000 do get one to withstand power. always something to fuk ya hey?

by **EFFalcon** » March 2nd, 2009, 6:04 pm

so whats tristan running now?

by **ruleford** » March 2nd, 2009, 6:23 pm

nice to here dylan to bad about the clutch it did last while with abit of a thrashing

by **LOW_XR** » March 2nd, 2009, 6:44 pm

EFFalcon wrote:so whats tristan running now?

ah the plazmaman 4'' intake.it looks great.

ruleford wrote:nice to here dylan to bad about the clutch it did last while with abit of a thrashing

lol yeah got a few good skids out of it.
hopefully the next one lasts longer.

by **LOW_XR** » March 7th, 2009, 4:38 pm

i got my hands on some genuine paint that fpv use.
its the silver for the dash ect.

so as im not really driving the car i thought id take the bits into work this morning and paint em up.
its not to evryones taste but i like it.

before-

after-

by **nstg8a** » March 7th, 2009, 4:41 pm

that silver looks good, breaks up the dark interior... mint car

by **t1MMy** » March 7th, 2009, 5:08 pm

Looks mint. Just the the GT interior :grin:

by **Dezza** » March 7th, 2009, 5:39 pm

Good job. It just needs BF armrests now (the silver insert on the doortrims)

by **LUXO_8** » March 7th, 2009, 5:49 pm

that looks mint dylan....great job!

by **EBOOST** » March 7th, 2009, 5:57 pm

yeah looks good mate but u need to do the bit around the rear vents now lol.
cheers josh.

by **Parfrey** » March 7th, 2009, 5:57 pm

You got good taste man! i was just thinking about doing the same thing and i looked on here and you'd already done it :-P

i thought about doing it in black but i think silver looks better.
Is it a colour i can get from autobarn or should i just try to match it up??

by **BLKPHN** » March 8th, 2009, 12:12 pm

Looks fantastic Dylan!

by **LOW_XR** » March 8th, 2009, 6:01 pm

cheers all.

at the same time i painted my silver bits in also painted some gt door spears which i had sitting here for a bit.
so fitted em today.

before-

after-

Who is online