t1MMy's XR6

t1MMy · Post by **t1MMy** » February 25th, 2009, 12:53 pm

Little bit quiet here so I thought I'd throw up some pics of the car over the time I've had it.

This was the car about 2 years ago, nothing out of the ordinary apart from from some CSA 17" wheels and SSL springs.

Moving on, the old EF motor that was in it had done over 260,000km's and was just using too much oil, so rather than doing a engine re build I put a AU3 XR motor in it and this is it. After the engine swap I did a manual conversion, but I didn't get any pics of it.

Not long after I did the engine swap I got rid of the 17" CSA's and got the 19" GTP's off Pete (pHaT`eL).

When I started spending money on it to make the car look a little bit more respectable, I couldn't stop. Next thing to do was the paint job. Paint was faded pretty bad and was shitting me. While it was in for paint I had a standard boot lid put on it (CBF pfilling holes where the spoiler was) and had the car de badged aswell as the BA bulge.

Car turned out pretty good and I was finally happy with what had been done to it. Don't really have much more to do with it except for some leather interior and that should do me.

BROCKYB8 · Post by **BROCKYB8** » February 25th, 2009, 1:01 pm

Nah looks good mate

Post by **pHaT`eL** » February 25th, 2009, 3:06 pm

Looks the goods man!! One thing I reckon you need, coloured plates, standard ones are letting it down.

BROCKYB8 · Post by **BROCKYB8** » February 25th, 2009, 3:08 pm

yeah coloured plates saying t1mmy ftw

t1MMy · Post by **t1MMy** » February 25th, 2009, 3:14 pm

Still trying to figure out what custom plates I want. Not too sure about t1MMY plates tho....

BROCKYB8 · Post by **BROCKYB8** » February 25th, 2009, 3:25 pm

its the best i could cum up with here some other crap ones u could get
fulsik
redcar
redxr6
ruredy

SnyperEB · Post by **SnyperEB** » February 25th, 2009, 5:09 pm

Looks awesome Timmy.

Dam Brocky you come up with some bad number plates.

BROCKYB8 · Post by **BROCKYB8** » February 25th, 2009, 8:40 pm

lol that was the whole point of those number plates to bhe stupid , I wasnt being serious

Dumpsta · Post by **Dumpsta** » February 25th, 2009, 8:50 pm

Heck yeah! Love it!

burnt turtle · Post by **burnt turtle** » February 25th, 2009, 8:55 pm

i have a mate who is selling REDRYD if you want them

lol

t1MMy · Post by **t1MMy** » February 25th, 2009, 8:59 pm

I was thinking something along the lines of HYBRD6...or HYBRDXR

Post by **Bipolar** » February 25th, 2009, 10:54 pm

XR looks fantastic mate. Wouldn't change a thing on it except plates.

Post by **Eb Barbie** » February 26th, 2009, 7:35 am

Its come along nicely Tim, plates would be good but no to the timmy plates

Dansedgli · Post by **Dansedgli** » February 26th, 2009, 7:36 am

burnt turtle wrote:i have a mate who is selling REDRYD if you want them

People will see that then see Timmy then think he is a sleazy bastard!!

t1MMy · Post by **t1MMy** » February 26th, 2009, 7:48 am

Yeah I'll pass on the REDRYD plates thanks.

BROCKYB8 · Post by **BROCKYB8** » February 26th, 2009, 7:56 am

bUT timmy you didnt say you would pass on mine

BLKPHN · Post by **BLKPHN** » February 26th, 2009, 7:56 am

top car mate.!!

what about SEERED.

JMOLLY · Post by **JMOLLY** » February 26th, 2009, 9:07 am

pHaT`eL wrote:Looks the goods man!! One thing I reckon you need, coloured plates, standard ones are letting it down.

I think the only color that would suit is black.

Phillis · Post by **Phillis** » February 26th, 2009, 9:53 am

maaaan i love your car. ill have your engine soon

Jake · Post by **Jake** » February 26th, 2009, 9:54 am

JMOLLY wrote:
pHaT`eL wrote:Looks the goods man!! One thing I reckon you need, coloured plates, standard ones are letting it down.
I think the only color that would suit is black.

Or red plates

BROCKYB8 · Post by **BROCKYB8** » February 26th, 2009, 10:03 am

BLKPHN wrote:top car mate.!!

what about SEERED.

or ICRED

Post by **pHaT`eL** » February 26th, 2009, 4:12 pm

lol @ ICRED.. no red plates, theres too much red..

Get a blower and get REDWYN

t1MMy · Post by **t1MMy** » February 26th, 2009, 4:49 pm

pHaT`eL wrote:lol @ ICRED.. no red plates, theres too much red..

Get a blower and get REDWYN

You're a bad influence Pete. Actually....most of you are bad influences lol.

When I saw the EL XR6 turbo with 500rwkw I was like..

"must.....spend.....more....money

LOW_XR · Post by **LOW_XR** » February 26th, 2009, 9:49 pm

looking good man. looks heaps better than with old wheels and faded paint

t1MMy wrote:Still trying to figure out what custom plates I want

LOW- XR?

i got 1 lol

Dezza · Post by **Dezza** » February 26th, 2009, 10:00 pm

LOW_XR wrote:looking good man. looks heaps better than with old wheels and faded paint

t1MMy wrote:Still trying to figure out what custom plates I want
LOW- XR?

i got 1 lol

Yeah, only one
The other one's somewhere between Melbourne and Geelong

Car looks great, Timmy

Post by **Eb Barbie** » February 27th, 2009, 7:19 am

t1MMy wrote:You're a bad influence Pete. Actually....most of you are bad influences lol.

No shit! And them showing stuff off makes me want it. How do you think my car became turbo!?

t1MMy · Post by **t1MMy** » February 27th, 2009, 7:29 am

LOW_XR wrote:looking good man. looks heaps better than with old wheels and faded paint

t1MMy wrote:Still trying to figure out what custom plates I want
LOW- XR?

i got 1 lol

How much do you want for them?..

ELOVER · Post by **ELOVER** » March 1st, 2009, 2:05 pm

very nice xr, looks awesome!

1996xr6 · Post by **1996xr6** » March 1st, 2009, 5:41 pm

nice job timmy i saw u driving up lyrebird drive and frankston dandy today looks mad on the road

t1MMy · Post by **t1MMy** » March 1st, 2009, 6:37 pm

Cheers...I probably would have seen yours too, I always look the EF/EL XR's if I spot one, just can't remember

LOW_XR · Post by **LOW_XR** » March 2nd, 2009, 6:04 pm

t1MMy wrote:
LOW_XR wrote:looking good man. looks heaps better than with old wheels and faded paint

t1MMy wrote:Still trying to figure out what custom plates I want
LOW- XR?

i got 1 lol
How much do you want for them?..

pm sent mate.

skewy_33 · Post by **skewy_33** » March 2nd, 2009, 9:23 pm

amazing car mate i got the burgandy el xr6 wif the gtp wheels and looking at gettin the bukdge bonnet too how much did it set you back?

krisisdog · Post by **krisisdog** » March 2nd, 2009, 9:55 pm

i'd be interested in knowing that too Timmy, I can get the bulge for $180 delivered. How much did you get slugged to fit it?
Car looks tops btw :-D

t1MMy · Post by **t1MMy** » March 3rd, 2009, 7:37 am

Not exactly sure on the price of the bonnet as I had tho whole car re-sprayed..

Give Ronnie at Phat Customs a call and ask him if you like. 9706 7922

BROCKYB8 · Post by **BROCKYB8** » March 3rd, 2009, 8:12 am

pHaT`eL wrote:lol @ ICRED.. no red plates, theres too much red..

Get a blower and get REDWYN

Lol thats a good one pete. well i just write what comes into my head.

t1MMy · Post by **t1MMy** » March 3rd, 2009, 8:38 am

What ever plates I get will be black and white.

Dumpsta · Post by **Dumpsta** » March 3rd, 2009, 5:14 pm

1+ for the black and white, I have them on mine and it really sets it off plus well in my case I can throw them on any car I own afterwards and they will suit.

t1MMy · Post by **t1MMy** » March 5th, 2009, 7:37 pm

Just destroyed the clutch....ohwell, I'll get a new 1 tomorrow.

Ticky34 · Post by **Ticky34** » March 10th, 2009, 9:38 pm

Yeh man thats is a wiked car luv the bonnet

t1MMy · Post by **t1MMy** » March 14th, 2009, 2:54 pm

*EDIT*....the GTP's are going to be off the car for a few weeks now. Some little asshole ran out in front of the car today and it was either run him over and kill him, or swerve dangerously in the wet causing the ass to kick out and kiss the gutter. I chose to not be charged with culpable driving. LHR wheel is fooked...not even going to bother having it fixed, I'll just buy a new 1.
Worst part is I wasn't even going fast, lucky for the little kid!!!!