Re: Important Poll

by **Commando** » September 17th, 2007, 10:37 pm

edit: THIS IS NOT MY THREAD, DAN STARTED IT BUT HIS POSTS WENT AWOL. I AM NOT CONSIDERING A REPLACEMENT FRONT BAR

As much as I love the sleeper look...

Do it the Paintright way?

by **XRated** » September 17th, 2007, 10:40 pm

I love the sleeper look, but I think you over-estimate people picking out subtle changes like the front bar. Heaps of slow-arse cars have big rims and stuff anyway, but people always give them a race. As if an ordinary LS1 or S15 owner is going to see the Scorcher bar and think your car is heavily modified. Just paint the cooler black. Do it once, do it properly.

by **Bipolar** » September 17th, 2007, 10:41 pm

Can't go past the Scorcher bar, unless you REALLY don't want to attract much attention.

by **Commando** » September 17th, 2007, 10:43 pm

Dansedgli wrote:Paintright way?

Do it once, do it right

Which is some fine preaching coming from me. I probably have the dodgiest E-Series here due to not doing things right the first time around.

Luke sez: paint the cooler black. YES!

by **-jjM-** » September 17th, 2007, 10:44 pm

and important poll must only mean one thing.....strippers!!!1

Bigger + Scorcher gets my vote

by **LUXO_8** » September 17th, 2007, 11:06 pm

loved the look of your car with scorcher bar, the kit it had and the directors....... thought you were nuts to go back from that...lol...

by **someLS1** » September 17th, 2007, 11:09 pm

Im probably the only one who will vote stock bar but i really dont like the look of aftermarket bars on ea-ed.. ofcourse if the restriction with the smaller cooler is a big issue there is your decision made for you but if its not id leave the stock bar on.

by **-jjM-** » September 17th, 2007, 11:20 pm

SLOLS1 wrote:Im probably the only one who will vote stock bar but i really dont like the look of aftermarket bars on ea-ed.. ofcourse if the restriction with the smaller cooler is a big issue there is your decision made for you but if its not id leave the stock bar on.

are you saying that because after seeing dezzas car with it on and not painted? ls1 fegets, sif even post....

by **Damo** » September 17th, 2007, 11:24 pm

paint in Envi Green and put TS 50 wheels on it.

by **someLS1** » September 17th, 2007, 11:25 pm

lol this kent.. i like the stock front look hahaha got nothing to do with your anal mates

by **spope** » September 17th, 2007, 11:26 pm

Stock bar. Sleepers FTW.
Dezza spec FTL.

by **-jjM-** » September 17th, 2007, 11:29 pm

SLOLS1 wrote:lol this kent.. i like the stock front look hahaha got nothing to do with your anal mates

shut up dan, go have a coffee with your anal mate.....no offence "real" dan

by **John_LS1** » September 18th, 2007, 2:16 am

i personally dont like the scorcher bar. have you thought of a moffat front bar? they look alot better IMO but dont know what size cooler will fit behind it.

by **BI6TIM** » September 18th, 2007, 7:31 am

I voted scorcher bar and bigger cooler. I might be a bit bias though.

by **OED666** » September 18th, 2007, 8:39 am

Scorcher bar FTW!!! Definitely looks the goods.

by **EFFalcon** » September 18th, 2007, 8:45 am

DJR Bar like GUNNS
subtle yet aftermarket.

by **TUFED6** » September 18th, 2007, 9:00 am

This poll... :roll:

by **Steady** » September 18th, 2007, 9:08 am

EFFalcon wrote:DJR Bar like GUNNS
subtle yet aftermarket.

This kent should be running the site or something.
Al's SVO looks tough as with the DJR bar, yet its subtle and doesn't look out of place.

Not a fan of the scorcher bar at all.
Only other front bar I'd even consider on an EA-ED is Moffat like the greek said.

by **OED666** » September 18th, 2007, 9:09 am

EFFalcon wrote:DJR Bar like GUNNS
subtle yet aftermarket.

I think i know the one your talking about... pic please.

by **Steady** » September 18th, 2007, 9:14 am

The result of this poll has reduced my faith in the polling system.
I'm never voting in anything, ever again.
Dan FTL.

by **Commando** » September 18th, 2007, 9:18 am

Dan beat me to Gunns' thread. Then again eafalcon.com has an annoying habit of "popping up" after hiding it behind another window that's open. In this case, the boss caught me out :roll:

FTL

And polls are never to be trusted!

by **OED666** » September 18th, 2007, 9:20 am

Gunn's bar is shit hot!!! VERY NICE!!!

I agree what your saying about needing the rest of the body kit though. No doubt what ever you decide it will look sweet.

by **TUFED6** » September 18th, 2007, 9:23 am

Commando wrote:And polls are never to be trusted!

The only good pole is on a stage and is 10ft tall and made of brass?

by **ned** » September 18th, 2007, 10:27 am

Stock bar.

But if you had to do something else, then I'd go the DJR bar but with that middle slat cut out, looks too busy in there.

+1 for less polling and more burnouts.

by **XRated** » September 18th, 2007, 11:23 am

You kents throwing in other options - stick to the poll!! I don't really dig the Scorcher bar much either, but if there is a cooler behind it then that's all that matters. I also like the MMM bar without the stupid fog lights. Probably my favourite after the APV one.

by **XRated** » September 18th, 2007, 11:29 am

Hahaha they look sick though!

by **webby_191189** » September 18th, 2007, 12:40 pm

Go the scorcher so u can have the big FMIC and just spray it black

by **glenneaux** » September 21st, 2007, 10:56 pm

did you get another scorcher bar dan... ?

by **Malakai** » September 22nd, 2007, 2:07 pm

I voted scorcher + big cooler.

But I've actually got somewhere in between in mind for the AIT. A fricken massive cooler and a stock bar. turbodrift and I recon we can get away with it... Tests so far seem to point towards it working.

by **Damo** » September 23rd, 2007, 3:42 am

Keep the stock front bar, but get all the paint mint and stuff and some nice wheels, AJR Directors ? :lol:

It will look nice, be fast and still be understated.

by **Kenaz** » October 1st, 2007, 8:56 am

Dezza has a Scorcher bar. Nuff said.

by **Commando** » October 1st, 2007, 9:05 am

Kenaz wrote:Dezza has a Scorcher bar. Nuff said.

Maybe Dan is planning on infiltrating EANL?

by **Dansedgli** » October 23rd, 2007, 1:30 pm

Scorcher bar FTW. Im trying to track another one down at the moment. It wont go on the car until its painted so I might use the smaller cooler until that is done or just leave it NA until then.

I looked at other bars and they are all at least $200 more and really need the rest of the kit to look good. That just means more bodywork. I hate bodywork.

by **Commando** » October 23rd, 2007, 2:22 pm

This thread is confusing Dan

by **braiden** » October 23rd, 2007, 3:51 pm

Obviously it all depends on how much power you wanna push. If you are content with the look of the car and and the power the small cooler restricts you to, then stock bar.

But if you want more power, Scorcher. I reckon the Scorcher bar looks fucking wicked.

by **Rollin** » October 23rd, 2007, 6:04 pm

I voted scorcher bar.

Scorcher bar = bigger cooler.

Bigger cooler = more power.

More power = good.

BI6TIM - I can't wait to see your cooler mounted behind that bar, I might have to get one if it all fits ok...

by **Ef_frmnt** » October 23rd, 2007, 7:02 pm

rex bar = no good on white car
scorcher = perfect hole for big cooler.

by **glenneaux** » October 23rd, 2007, 7:06 pm

Scorcher bars are awesome.

by **XRated** » October 23rd, 2007, 7:27 pm

Oh please Rollin, get a Scorcher bar! WRX bar = aesthetic abomination

by **Dansedgli** » October 23rd, 2007, 7:29 pm

scorcher bar $240 + freight.

One is being made for me now.

Sleeper or not

Who is online