Hey Hey !

Introduce yourself and your ride.

Hey Hey !

Postby mista » September 19th, 2007, 4:25 am

Hey guys .. new to this forum .. :)
Just bought myself an 1993 EB Series 2 from a mate .. hehe hasn't been driven for ard 1.5 yrs
needed to replace just a battery and an alternator belt .. :)

no money for rego yet .. but had a "test drive" ... coz couldn't wait :)
seems to be fitted with ' high performance' leads ..
and somehow .. it does a 'mini-drift' when i do a sharp turn and pressed slightly more down on the accelerometer

needs mags though .. haha .. (get it registered first :P )
maybe a couple of hubcaps first will do the job good .. for the time being ..

anyway ..
HEY .. Hey !!
mista
Idling
 
Posts: 20
Joined: September 19th, 2007, 4:19 am
Has Liked: 0 time
Been Liked: 0 time

Re: Hey Hey !

Postby Eb Barbie » September 19th, 2007, 1:34 pm

As we say to everyone who hasnt done so...POST PICS!! :D
Past: EB Falcon Turbo
Now: AU Fairlane V8
User avatar
Eb Barbie
Hitting N2O
 
Posts: 3756
Joined: July 25th, 2007, 8:36 am
Has Liked: 106 times
Been Liked: 71 times

Re: Hey Hey !

Postby mista » September 19th, 2007, 9:47 pm

Hey hey .. here it is .. my car
and i just found out it's a 1993 September Falcon ED
hehe

Image
Image
Image

*testing on posting of photo*
mista
Idling
 
Posts: 20
Joined: September 19th, 2007, 4:19 am
Has Liked: 0 time
Been Liked: 0 time

Re: Hey Hey !

Postby [D1SCNT] » September 19th, 2007, 10:01 pm

dump it and ul luv the stockies.

LoL@ high performance lead's...
[D1SCNT]
 


Re: Hey Hey !

Postby mista » September 19th, 2007, 10:17 pm

dump it ?
mista
Idling
 
Posts: 20
Joined: September 19th, 2007, 4:19 am
Has Liked: 0 time
Been Liked: 0 time

Re: Hey Hey !

Postby Damo » September 19th, 2007, 10:57 pm

he mean lower the ride height. :) Those leads do look quite thick, does it say anything on them ? Normal leads are 8 mm.
Damo
Full Boost
 
Posts: 2589
Joined: July 13th, 2007, 8:16 pm
Has Liked: 0 time
Been Liked: 3 times

Re: Hey Hey !

Postby nommic » September 19th, 2007, 11:05 pm

Angle grinder ftw.

Is that a taxi-spec sun visor I spy?
wet towels
User avatar
nommic
Spooling Up
 
Posts: 879
Joined: August 4th, 2007, 10:42 am
Location: Geelong
Has Liked: 0 time
Been Liked: 2 times

Re: Hey Hey !

Postby mista » September 20th, 2007, 12:00 am

err .. Red Triple Silicone 8mm High performance cable
mista
Idling
 
Posts: 20
Joined: September 19th, 2007, 4:19 am
Has Liked: 0 time
Been Liked: 0 time

Re: Hey Hey !

Postby someLS1 » September 20th, 2007, 12:33 am

[D1SCNT] wrote:dump it and ul luv the stockies.


I agree why wreck perfectly good stockies with hubcaps just lower it.. alot and leave the stockies
-Black VZ Calais 5.7ltr V8, cammed, stalled, built auto, 3.7s trutrac, FR19s and the rest. - 270rwkw 1/4 12.7 @ 112mph

-ENVI Green 04 BA XR6T ute, hardlid, 20s, bigger injectors, fuel pump, bigger cooler, dose pipe! dyno tune - 236rwkw
User avatar
someLS1
Breaking Traction
 
Posts: 1424
Joined: July 15th, 2007, 6:21 pm
Has Liked: 51 times
Been Liked: 64 times

Re: Hey Hey !

Postby Eb Barbie » September 20th, 2007, 9:36 am

SLOLS1 wrote:
[D1SCNT] wrote:dump it and ul luv the stockies.


I agree why wreck perfectly good stockies with hubcaps just lower it.. alot and leave the stockies


Agree +2
Past: EB Falcon Turbo
Now: AU Fairlane V8
User avatar
Eb Barbie
Hitting N2O
 
Posts: 3756
Joined: July 25th, 2007, 8:36 am
Has Liked: 106 times
Been Liked: 71 times

Re: Hey Hey !

Postby mista » September 21st, 2007, 9:02 pm

Interesting ...
i reckon their taxi sun visors .. i dunno ..
got it with the car .. tried to remove them .. but there was an "empty gap" where the visors used to be ..
so i'd either leave it on .. or replace the side rubber windscreen covers.


anyonw know where i can get spoilers ?
about the lowering .. *newbie qn* .. do i need to purchase lowered suspensions ? or can i just adjust them ? :?
mista
Idling
 
Posts: 20
Joined: September 19th, 2007, 4:19 am
Has Liked: 0 time
Been Liked: 0 time

Re: Hey Hey !

Postby Damo » September 21st, 2007, 10:06 pm

You will need new springs to lower it. King springs are a popular brand and won't brake the bank. Most people seem to go for 'Super Low' but if you like to wear skirts, then just get low height, and if you're a mad kent there is also the option for ultra lows (lower than super lows) confused yet ?. It's also recommended to replace the shocks and struts to suit the super lows, but you can get away with using you're standard shocks/struts, they will just wear out a bit quicker and it won't ride quite as well.

Also you can 'Adjust' your current suspension, but it's illegal and depending on how you do it, it can be dodgy. :roll:
Damo
Full Boost
 
Posts: 2589
Joined: July 13th, 2007, 8:16 pm
Has Liked: 0 time
Been Liked: 3 times

Re: Hey Hey !

Postby BlackED_Sprint » September 21st, 2007, 10:11 pm

ie. angle grinder = dodgy :D
R.I.P 94 ED XR8 Sprint
Current Daily: 92 Subaru Liberty with 520,000kms on the clock and still going strong
User avatar
BlackED_Sprint
Cruising
 
Posts: 354
Joined: September 20th, 2007, 3:19 pm
Location: Wantirna
Has Liked: 0 time
Been Liked: 0 time

Re: Hey Hey !

Postby mista » September 22nd, 2007, 2:15 am

i want to remove the sun visor ..
but do you guys know where to replace the side rubbers for the windscreen ?
if not i'll just leave them on ....

wonder how it'll look like with that and spoilers :P
mista
Idling
 
Posts: 20
Joined: September 19th, 2007, 4:19 am
Has Liked: 0 time
Been Liked: 0 time

Re: Hey Hey !

Postby Damo » September 22nd, 2007, 3:05 am

you should be able to get the windscreen rubber moulds from a wrecker or Ford maybe.
Damo
Full Boost
 
Posts: 2589
Joined: July 13th, 2007, 8:16 pm
Has Liked: 0 time
Been Liked: 3 times

Re: Hey Hey !

Postby Nikk O'lass » September 22nd, 2007, 9:47 pm

E-series mini drifts FTW! Is it manual, that gives great fun, second gear has some shove in it :D
.T..I..C..K..F..O..R..D
\≡≡T≡≡/
User avatar
Nikk O'lass
Full Boost
 
Posts: 2203
Joined: September 9th, 2007, 8:14 pm
Location: Tamworth
Has Liked: 99 times
Been Liked: 125 times

1998 Ford XR6

Re: Hey Hey !

Postby mista » September 23rd, 2007, 1:28 am

It's an auto :P
it happened coz i did a full turn and pressed a bit too much on the accelerator .. *i reckon*

decided to stay with the stockies and added hubcaps from supercheap

2 stupid things were accidentally done :( *sobb*
1) while washing .. i chipped the a small 4mm x 4mm paint at the centre of the bonnet :P
2) it rained just now .. and the old wipers caused a semicircular scratch on the wind screen

Things that needed to be done ..
1) the stupid cloth inside the car above the head, needs to be glued (or removed totally)
2) possibly air
mista
Idling
 
Posts: 20
Joined: September 19th, 2007, 4:19 am
Has Liked: 0 time
Been Liked: 0 time

Re: Hey Hey !

Postby Damo » September 23rd, 2007, 3:37 am

rain is good, we are in a drought remember.
don't worry about the paint it didn't look all that flash to begin with.
Pull the head liner out and re-glue it.
Air ? Are you high ?
Damo
Full Boost
 
Posts: 2589
Joined: July 13th, 2007, 8:16 pm
Has Liked: 0 time
Been Liked: 3 times

Re: Hey Hey !

Postby holmsy » September 24th, 2007, 12:48 pm

get a can of spray on glue.
pull the headliner right down except for where it is clipped up at the front (above the windscreen) and then spray as you go and slowly move towards the back of the car.
Project: SLOXR8: 1994 EF XR8, mech shift kit, 3500 histall, Lokka, 36lb injectors, AU 185 motor, Cranecam 444225, crane roller rockers, crow valve springs, Pacies, 3" exhaust, hiflo cats. twin 044's, vortech v2,microtech tuned by daltons (290.3rwkw @11psi) at DALTONS
Image
User avatar
holmsy
Shooting Flames
 
Posts: 6473
Joined: August 2nd, 2007, 11:07 pm
Location: Geelong
Has Liked: 182 times
Been Liked: 154 times

1994 Ford XR8

Re: Hey Hey !

Postby mista » September 25th, 2007, 12:08 am

hmm.. i can do that ... spray on glue .. is it available at supercheap ? or any hardware store ?

was referring to air conditioning... it's gonna be summer soon :P

had the car washed, vaccumed and polished .. and added carmats .. hehe (working at a car detailer atm)
mista
Idling
 
Posts: 20
Joined: September 19th, 2007, 4:19 am
Has Liked: 0 time
Been Liked: 0 time

Re: Hey Hey !

Postby holmsy » September 25th, 2007, 12:27 am

believe bunnings sells it.
Project: SLOXR8: 1994 EF XR8, mech shift kit, 3500 histall, Lokka, 36lb injectors, AU 185 motor, Cranecam 444225, crane roller rockers, crow valve springs, Pacies, 3" exhaust, hiflo cats. twin 044's, vortech v2,microtech tuned by daltons (290.3rwkw @11psi) at DALTONS
Image
User avatar
holmsy
Shooting Flames
 
Posts: 6473
Joined: August 2nd, 2007, 11:07 pm
Location: Geelong
Has Liked: 182 times
Been Liked: 154 times

1994 Ford XR8


Return to Introduction

Who is online

Users browsing this forum: No registered users