HYPO-NL The Fairlane Ghia Concorde - 15.1 @ 92.39mph

Post by **Bipolar** » July 7th, 2009, 1:45 pm

Looked good at Pier 35 a few weeks ago. DFs are the best looking LWB IMO.

NL_CONCORDE · Post by **NL_CONCORDE** » July 7th, 2009, 5:41 pm

Thanks mate was goin to roll in with the NL but then thought i'll bring out the 5 litre
glad you could see some of the club in vic see you again

NL_CONCORDE · Post by **NL_CONCORDE** » July 9th, 2009, 12:27 pm

Pic of LTD taken at VCC

SLY5LT · Post by **SLY5LT** » September 8th, 2009, 1:44 am

joel,
any update's on the new engine/tranny combo for the concorde ?

BROCKYB8 · Post by **BROCKYB8** » September 8th, 2009, 8:41 am

i think a build thread or showroom thread should be made rather than here mate.

NL_CONCORDE · Post by **NL_CONCORDE** » September 11th, 2009, 10:00 pm

will make a build thread soon for the lane and later for the LTD

NL_CONCORDE · Post by **NL_CONCORDE** » September 23rd, 2009, 12:01 am

SLY5LT wrote:joel,
any update's on the new engine/tranny combo for the concorde ?

Well updates for those who dont know i done internal damge to the original nl motor(tickford xr6) and was thinkin of goin manual so in search of new motor another xr6 engine 202,000km's head been done and a EA T5 came up at the right time then the 6 bolt flywheel from kev with a xtreme h/d clutch kit double button item so got it all sorted and now its all installed didnt realise just how quick this combo is has 3.45's in the rear and need to see dyno figures then up to heathcote for some passe's so i'll start a new build thread as im still using the welcome section

SLY5LT · Post by **SLY5LT** » September 23rd, 2009, 12:27 am

NL_CONCORDE wrote:
SLY5LT wrote:joel,
any update's on the new engine/tranny combo for the concorde ?
Well updates for those who dont know i done internal damge to the original nl motor(tickford xr6) and was thinkin of goin manual so in search of new motor another xr6 engine 202,000km's head been done and a EA T5 came up at the right time then the 6 bolt flywheel from kev with a xtreme h/d clutch kit double button item so got it all sorted and now its all installed didnt realise just how quick this combo is has 3.45's in the rear and need to see dyno figures then up to heathcote for some passe's so i'll start a new build thread as im still using the welcome section

good stuff joel

i take it there's more power with the new combo ?
just remember there's a RED LINE on the tacho

NL_CONCORDE · Post by **NL_CONCORDE** » September 23rd, 2009, 12:41 am

Yeah cant afford to do another motor just for the sake of watchin the tacho go past 6grand think it was 1st gear 100kmh's bout 6,400rpm learnt my lesson now and not again

NL_CONCORDE · Post by **NL_CONCORDE** » December 9th, 2009, 11:09 am

Thanks to SLY5LT for the pic great photo of the LTD doin a burnout thanks Steve

BROCKYB8 · Post by **BROCKYB8** » December 9th, 2009, 12:21 pm

How bout you make a build thread rather than putting stuff in here

Post by **pHaT`eL** » December 9th, 2009, 4:11 pm

Thread moved.

NL_CONCORDE · Post by **NL_CONCORDE** » December 9th, 2009, 11:47 pm

BROCKYB8 wrote:How bout you make a build thread rather than putting stuff in here

pHaT`eL wrote:Thread moved.

Thanks Guys it will take a lil time to make single build threads as ive done so much with the lane and many thanks now i m not in the introduction just been busy lately thank u again Scotty & Pete

More Pics from the nite(Calder needs to bring back the Burnout Comp's)

NL_CONCORDE · Post by **NL_CONCORDE** » December 29th, 2009, 7:02 pm

well after bending the guard with the 20's on 1 of the boosted cruises
i decided to respray the guard and it turned to shit
heres pics of swappin the guard last nite(Pics taken with mobile) Thanks for the helpin out kyle

And other mod done to the DF since is a deleted rear muffler now for the rest of the system

Post by **pHaT`eL** » December 30th, 2009, 3:28 pm

Needs less exhaust

LOW_XR · Post by **LOW_XR** » December 30th, 2009, 4:21 pm

dump before the diff.....works for me

NL_CONCORDE · Post by **NL_CONCORDE** » December 30th, 2009, 6:28 pm

LOW_XR wrote:dump before the diff.....works for me

I'll be goin a twin system - extractors with 2 hi flow cats into 2 mufflers dumped at the diff with a dummie pipe at bar
Other Mod's to come will be gt40p heads bigger maf/throttle body better intake so au top end n few other goodies

LTD needs some balls unlike the previous owner of the car lol

Post by **pHaT`eL** » December 31st, 2009, 1:45 pm

ROFL!!!

Twins dumped before the diff is the way to go.. Not droney like everyone seems to think.

LOW_XR · Post by **LOW_XR** » December 31st, 2009, 2:00 pm

lol mines dumped b4 the diff pete. drones like a mofo haha. tuf when ya jump on the gas tho hey!

Post by **pHaT`eL** » December 31st, 2009, 2:02 pm

Id get a pic up on the exhaust, but I cbf jacking it up to see it, lol.

Twin 2.5" pipes, muffler on each side, dumpers facing towards the outside of the car. Sounds good all the time, lol..

LOW_XR · Post by **LOW_XR** » December 31st, 2009, 2:07 pm

lol you will have to take it to the mini meet. i wana hear this thing.might give me some idea for me ute. mines only stock zorst to the diff anyway.so think thats 2.25''.

NL_CONCORDE · Post by **NL_CONCORDE** » December 31st, 2009, 2:51 pm

pHaT`eL wrote:ROFL!!!

Twins dumped before the diff is the way to go.. Not droney like everyone seems to think.

HMMM thinkin i'll arrange a weekend with kev for system to be done then
and dylan hope to see your ute at the next meet

Hate being out of the scene guess that'll happen when you wait and wait for a car that is still sitting at the workshop
nearly 3 months after it went there has a miss from 3,000rpm-4,500rpm in 2nd when it was last in my hands

So ive decided to do work to the LTD till i get the lane back
also been thinking of finding a manual setup out of a xr8 to put in behind the 5 litre in the ltd
and better diff gears than 3.23
Just wanna setup the ltd to take off harder and have an overall better power range than some ba xr6t's
theres a few other things ive had in mind also but want a sleeper

Post by **pHaT`eL** » December 31st, 2009, 2:59 pm

I bought it off holmsy, and Kev modified it

Any exhaust joint should be able to make one up for ya pretty cheap.

NL_CONCORDE · Post by **NL_CONCORDE** » December 31st, 2009, 3:12 pm

Too easy thanks mate

SLY5LT · Post by **SLY5LT** » December 31st, 2009, 5:26 pm

dumped at the diff system would cost f#%k all, pretty much straight pipe's....
would just depend if you go after market muffler's, or generic.

NL_CONCORDE · Post by **NL_CONCORDE** » December 31st, 2009, 6:53 pm

SLY5LT wrote:dumped at the diff system would cost f#%k all, pretty much straight pipe's....
would just depend if you go after market muffler's, or generic.

Yeah thats the plan of setup mite start with a cat back system and save i'll go aftermarket need baffle free mufflers had em on my old xf fairmont ghia and it sounded nice
will price it all up next week

NL_CONCORDE · Post by **NL_CONCORDE** » January 2nd, 2010, 8:28 am

This is LUXO8's setup and this is the setup i plan to go with on the DF

Post by **pHaT`eL** » January 2nd, 2010, 5:06 pm

Thats what mine looks like

NL_CONCORDE · Post by **NL_CONCORDE** » January 2nd, 2010, 7:23 pm

pHaT`eL wrote:Thats what mine looks like

Sweet i'll just order in my mufflers of choice for now get some AU3 XR8 cats and contact kev
Thanks Pete

67rce · Post by **67rce** » January 2nd, 2010, 9:08 pm

Want some "hiflow" AU cats?

NL_CONCORDE · Post by **NL_CONCORDE** » January 3rd, 2010, 5:01 pm

67rce wrote:Want some "hiflow" AU cats?

Thanks Mate chat soon

SLY5LT · Post by **SLY5LT** » January 3rd, 2010, 10:25 pm

before you do your exhaust, think of what your doing (engine wise) down the track

you don't want to have to do it all again in 6 mths time

NL_CONCORDE · Post by **NL_CONCORDE** » January 3rd, 2010, 10:28 pm

SLY5LT wrote:before you do your exhaust, think of what your doing (engine wise) down the track
you don't want to have to do it all again in 6 mths time

Yeah have done some thinkin the setup i'll do is to suit the way the engine build is goin mate

NL_CONCORDE · Post by **NL_CONCORDE** » January 28th, 2010, 11:54 am

Thinkin i'll keep the LTD N/A latest is few panels swapped and cat back system 3 inch into hi flow muffler single system........
Supplied and fitted Kev's Warehouse Thanks Kev n Mark

And the lane its goin again well its back in my hands just needs a proper tune

Pic's will be uploaded soon..

SLY5LT · Post by **SLY5LT** » February 1st, 2010, 1:44 am

spotted the concorde at kev's today, the rear tyre's/profile look good

the "df" sounded good the on chap's, it could use a better intake to go with the 3" exhaust but ....

NL_CONCORDE · Post by **NL_CONCORDE** » February 2nd, 2010, 11:23 am

SLY5LT wrote:spotted the concorde at kev's today, the rear tyre's/profile look good
the "df" sounded good the on chap's, it could use a better intake to go with the 3" exhaust but ....

Thanks Steve well i picked up the nl last nite from kev's gee this lane has a mind of its own...
Yeah the nl smokes those 235/60/16s tyres in 1st n 2nd without hesitation now

And for the DF its starting to have power its amazing what the right system can do
think'n of doing the top end in the df now get some flow

NL & LTD should be at dyno this week

Big Thanks to Kev for putting up and throwing back whatever the lane would throw at him problem wise
what took a workshop 3 months with no completion took kev 3 nights and its now running spot on
Think i know where im taking my car's from now

BROCKYB8 · Post by **BROCKYB8** » February 2nd, 2010, 12:46 pm

yeAH me and kev were playing with this on saturday .
We got it going but turned out to be a shitty fuel pump/filter

Schmee · Post by **Schmee** » February 2nd, 2010, 12:51 pm

along with a crap load of other things that ended up being lots of little problems running into one major one

Post by **EFFalcon** » February 2nd, 2010, 12:57 pm

Hahah, so you sorted it out after i left Kev?
She wasn't happy when i was there!

Schmee · Post by **Schmee** » February 2nd, 2010, 12:59 pm

yeah took me till sunday arvo to finally get it sorted

fkn fkn fkn grrrrrr fairlane

but all is good now.....real good