Car crushing

This is a general discussion forum, open to all participants
User avatar
Sunboost
Moderator
Moderator
Posts: 6900
Joined: July 13th, 2007, 11:18 am

Re: Car crushing

Post by Sunboost »

burnt turtle wrote:and i will cop a fine dick, im well aware of what im doing.
You're putting other road users in danger. Hoon wanker.
Edge FG G6ET 50th Anniversary
Vixen BF F6 R-Spec
SVD
Cruising
Posts: 252
Joined: November 14th, 2008, 7:30 pm

Re: Car crushing

Post by SVD »

Phillis wrote:i agree with the 3rd strike and its crushed, but i think the 'hoon law's are too tight. spinning wheels in the wet on the white lines and gettimg up to the speed limit as quickly as possible isnt hooning.
they count that as hooning?!?! i see it as economical driving, if it takes x seconds at 4500rpm to get to speed but xX3/4 seconds at 2500/3000 rpm isn't it more effective to get to the speed quickly...
User avatar
burnt turtle
Full Boost
Posts: 2211
Joined: January 17th, 2008, 10:05 am
Location: outside your window

Re: Car crushing

Post by burnt turtle »

Sundeep wrote:
burnt turtle wrote:and i will cop a fine dick, im well aware of what im doing.
You're putting other road users in danger. Hoon wanker.
how?

i guess you must not be a hoon
Image
Last edited by burnt turtle on January 24th, 2010, 11:27 pm, edited 1 time in total.
Image
User avatar
Parfrey
Breaking Traction
Posts: 1944
Joined: August 12th, 2007, 6:34 pm

Re: Car crushing

Post by Parfrey »

gotta love the people who think they never break the law, i think some people don't no how easy it would be to get done by hoon laws...

We need to stand up the authorities with stuff like this.. its just going to get worse and worse for us car people.
we'll all end up with gps trackers on our cars and get fines for everthing! :cry:
FG GT335 Tune only 376rwkw
GU Patrol TD42t @30psi
User avatar
misk
Melting Pistons
Posts: 10047
Joined: October 14th, 2008, 10:31 am
Location: dandenong

Re: Car crushing

Post by misk »

lucky most eseries cant get past 60
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger

soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing

XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities :)
User avatar
SnyperEB
Shooting Flames
Posts: 6901
Joined: July 13th, 2007, 5:14 pm
Location: E-Series Owners Club

Re: Car crushing

Post by SnyperEB »

misk wrote:lucky most eseries cant get past 60
Must only be yours. :P
[EBGLT]
User avatar
Sunboost
Moderator
Moderator
Posts: 6900
Joined: July 13th, 2007, 11:18 am

Re: Car crushing

Post by Sunboost »

burnt turtle wrote:
Sundeep wrote:
burnt turtle wrote:and i will cop a fine dick, im well aware of what im doing.
You're putting other road users in danger. Hoon wanker.
how?

i guess you must not be a hoon
Image
I was being sarcastic, you were being serious. Epic difference :)

Mad pic, haven't seen it in a while :D
Edge FG G6ET 50th Anniversary
Vixen BF F6 R-Spec
User avatar
stevo
Breaking Traction
Posts: 1899
Joined: July 13th, 2007, 12:13 pm

Re: Car crushing

Post by stevo »

That is a sick photo :thumbsup:
User avatar
Kenaz
Breaking Traction
Posts: 1555
Joined: July 13th, 2007, 12:19 pm
Location: Lilydale, Vic

Re: Car crushing

Post by Kenaz »

Ahh.. the memories :cool:
User avatar
t1MMy
Full Boost
Posts: 2977
Joined: June 29th, 2008, 11:11 pm
Location: Melbourne

Re: Car crushing

Post by t1MMy »

Must be a while ago now....isn't that car just a shell now?
User avatar
misk
Melting Pistons
Posts: 10047
Joined: October 14th, 2008, 10:31 am
Location: dandenong

Re: Car crushing

Post by misk »

SnyperEB wrote:
misk wrote:lucky most eseries cant get past 60
Must only be yours. :P
oh i dont think i'm alone :p
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger

soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing

XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities :)
User avatar
misk
Melting Pistons
Posts: 10047
Joined: October 14th, 2008, 10:31 am
Location: dandenong

Re: Car crushing

Post by misk »

is the EA doing a single pegger in that pic? lol
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger

soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing

XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities :)
User avatar
lawler
Spooling Up
Posts: 860
Joined: April 14th, 2009, 7:38 am
Location: tassie

Re: Car crushing

Post by lawler »

Phillis wrote:
The harsh penalty could only happen if a hoon driver owns the car and has two previous offences for crimes such as exceeding the speed limit by 45km/h, drag racing, doing burnouts or dangerous driving
wicked.

Excepted the problem is your first 2 offenses could be speeding up to the limit to fast and for revving your engine then accidentally apply to much throttle around a corner in the wet and that's it they can crush your car
User avatar
falcon4life
Breaking Traction
Posts: 1288
Joined: August 4th, 2009, 10:25 am
Location: ipswich QLD

Re: Car crushing

Post by falcon4life »

lawler wrote:
Phillis wrote:
The harsh penalty could only happen if a hoon driver owns the car and has two previous offences for crimes such as exceeding the speed limit by 45km/h, drag racing, doing burnouts or dangerous driving
wicked.

Excepted the problem is your first 2 offenses could be speeding up to the limit to fast and for revving your engine then accidentally apply to much throttle around a corner in the wet and that's it they can crush your car
you cant accidentally over accelerate around a corner because all road surfaces are different if the gov wants to be able to get us for that they should make all road surfaces equal

edit : what im saying is you could use the same amount of throttle you use normally and it could step out
NUT347 wrote:Ali G hooked car battery's together with humans and managed to blow a safe open so I can't see why not.
Current toy: 2014 Holden Colorado LTZ space cab manual
Goes anywhere and can pull a skid
Revengelane
Spooling Up
Posts: 689
Joined: August 3rd, 2007, 6:29 pm

Re: Car crushing

Post by Revengelane »

The complete fucken system is a JOKE, there is no warnings anymore...............nothing..........cops just pull you over and book you for anything and everything believing that they are making a difference. Cops and Local/ State councils have the opportunity to work with the "so called hoons" by providing more tracks, but instead they rather book everyone, take and sell yours cars and NOW fucken crush then. There is a serious breakdown issue with the relationship between "so called hoons" and "cops", which both the council and cops need to get together to work on this and stop booking and blaming. Work with "hoons" not alienate them.

People or "hoons" (as we are not recognized as people) will not tolerate crushing cars. If I was put in this position and it was my last strike, I wouldn't stop, I would run, it's my car.....not there's to sell or to crush they can cancel my licence and my rego, but they have no fucken right to sell or crush my car!!!!!!!!!!
U MAD BRO
User avatar
Phillis
Breaking Traction
Posts: 1863
Joined: August 10th, 2008, 3:37 pm
Location: Croydon, Melbourne

Re: Car crushing

Post by Phillis »

^^ i agree. I feel making tracks/strips is a kinda of vicious circle. Take sandown racecorse, here in Melb for example. Its been a race track since 1965, since the area around it was a paddock. Now, whenever theres a race, meet or LEGAL burnout competition or drag race there, the residents around the track complain. The local council has been trying to close it for years now. What happens when/if its closed? SE suburbs of melbourne (where alot of 'car enthusiasts' reside) have no where legal to do what they want to do. so they'll do it on the streets even more than they do now.

ill admit that if i had my car forcibly taken off me and saw it crushed in front of me, id straighten up and fly right knowing how much time/effort/energy/love i had put into it. but i think what 'they' are forgetting is that if you can be a hoon behind the wheel of vehicle A, you can be a hoon behind the wheel of vehicle B, C, D ect...for fucks sake, ive been driving a god damn .00003l toyota echo for the last week and ive done crazier shit in that than i have in my 'high performance sports wagon'
'94 EF XR6 Wagon- Build Thread here
pHaT`eL wrote:Editing posts never really gets old :)

I have a tiny tiny penis.
User avatar
67rce
Breaking Intake Welds
Posts: 4073
Joined: October 27th, 2007, 3:39 pm
Location: Brisbane

Re: Car crushing

Post by 67rce »

Phillis wrote:^^ i agree. I feel making tracks/strips is a kinda of vicious circle. Take sandown racecorse, here in Melb for example. Its been a race track since 1965, since the area around it was a paddock. Now, whenever theres a race, meet or LEGAL burnout competition or drag race there, the residents around the track complain. The local council has been trying to close it for years now. What happens when/if its closed? SE suburbs of melbourne (where alot of 'car enthusiasts' reside) have no where legal to do what they want to do. so they'll do it on the streets even more than they do now.

ill admit that if i had my car forcibly taken off me and saw it crushed in front of me, id straighten up and fly right knowing how much time/effort/energy/love i had put into it. but i think what 'they' are forgetting is that if you can be a hoon behind the wheel of vehicle A, you can be a hoon behind the wheel of vehicle B, C, D ect...for fucks sake, ive been driving a god damn .00003l toyota echo for the last week and ive done crazier shit in that than i have in my 'high performance sports wagon'
People bought there KNOWING there was a race track, HTFU! It's like people who buy houses with golf course frontage, then complain about golf balls!
Cammed Suzuki Baleno, Haltech PS1000, E85
User avatar
EFFalcon
Site Admin
Site Admin
Posts: 14796
Joined: June 4th, 2007, 8:26 pm
Location: Carrum Downs
Contact:

Re: Car crushing

Post by EFFalcon »

or people who buy next to an airport and complain about planes.
1995 Falcon GLi | 1997 EL GT | 1995 Falcon Futura | 1983 Thunderbird Heritage | 2003 Fairmont Ghia
User avatar
misk
Melting Pistons
Posts: 10047
Joined: October 14th, 2008, 10:31 am
Location: dandenong

Re: Car crushing

Post by misk »

i think my girlfriend would be one of those people lol
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger

soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing

XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities :)
User avatar
ned
Spooling Up
Posts: 983
Joined: July 14th, 2007, 7:09 pm
Location: Geelong

Re: Car crushing

Post by ned »

Seems as though you're better off being a dealer these days than owning a car lol.
too many sickcunts, not enough hospitals...
User avatar
misk
Melting Pistons
Posts: 10047
Joined: October 14th, 2008, 10:31 am
Location: dandenong

Re: Car crushing

Post by misk »

indeed.
an old mate of mine has been caught selling shit at least 4 or 5 times amongst other things and he's basicaly on a good behaviour bond lol
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger

soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing

XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities :)
User avatar
Phillis
Breaking Traction
Posts: 1863
Joined: August 10th, 2008, 3:37 pm
Location: Croydon, Melbourne

Re: Car crushing

Post by Phillis »

misk wrote:indeed.
an old mate of mine has been caught selling shit at least 4 or 5 times amongst other things and he's basicaly on a good behaviour bond lol
ken oath. i know a guy who knows a guy who deals in hot stuff. he was busted with 5 brand new still in box LED (not LCD, LED) TVs. Got a 12 month good behaviour bond.

**** owning a car.

EOI: 94' EF XR6 wagon. trade for LED TV. enquire within.
'94 EF XR6 Wagon- Build Thread here
pHaT`eL wrote:Editing posts never really gets old :)

I have a tiny tiny penis.
User avatar
bushman
Breaking Traction
Posts: 1041
Joined: May 31st, 2009, 7:25 pm
Location: On YOUR bed doing your sister

Re: Car crushing

Post by bushman »

All i will say is,
I AM FUCKED....
I must break the "LAW" realistically, somewhere around around 50 times a day thats just going to work and back once you throw in stupid little things they can **** you up for, and i like how they change they road rules 10 times a year so no cvnt actually knows them, because they are changed so often,
Its like a chicken being given a codes and practice on laying eggs and it being changed so often the feathery **** won't know how to lay a fucking egg in the end.

On another Note.
I can't wait for the first time a polly or someone gets done with his 3rd so called hooning offence, and it gets covered up, i hope its anna bligh (QLD premier) it happens to as well. i'd love to tattoo "HOON" across her forehead, or better yet FUCKWITT.
Rollin wrote:Watch this space people - the man from the bush can steer :)

........ After owning several.... more than I care to admit I have come to the conclusion that E series are shit.
User avatar
Snaken
Cruising
Posts: 270
Joined: October 30th, 2008, 8:39 am

Re: Car crushing

Post by Snaken »

Sundeep wrote:
burnt turtle wrote:and i will cop a fine dick, im well aware of what im doing.
You're putting other road users in danger. Hoon wanker.
hahaha fkn hilarious..... defs going in my sig
Sundeep wrote:
burnt turtle wrote:and i will cop a fine dick, im well aware of what im doing.
You're putting other road users in danger. Hoon wanker.
josh_ef
Breaking Traction
Posts: 1985
Joined: January 15th, 2010, 1:41 am

Re: Car crushing

Post by josh_ef »

from what i can see sunny wasnt denying he is a hoon

lols
User avatar
misk
Melting Pistons
Posts: 10047
Joined: October 14th, 2008, 10:31 am
Location: dandenong

Re: Car crushing

Post by misk »

i can never tell when he's being serious lol
he tends to wait until the other person is on the verge of slamming doors pissed off to say he's kidding
XG Panelvan
EF bottom end with ported EB head, valve springs, EL ECU & J3 chip, crane HI6 CDI & MSD coil, LC-1 wideband & SSI-4 logger

soon - .595" lift cam, GT4202, forged AU engine and built head, ems stinger 4424 ecu, powerglide with 5500 high stall etc - next, bellhousing

XH ute daily - DOHC BA XR6 engine, T5, AU3 ECU with TI J3 chip, ported BBM, 3" stainless intake - 12" sub, tub liner and hard lid - mass skids and epic tyre carrying capabilities :)
User avatar
Gozza
Hitting N2O
Posts: 3609
Joined: August 10th, 2007, 11:31 am
Location: Brisbane

Re: Car crushing

Post by Gozza »

I don't know why most of you cvnts are complaining. We mostly all drive shitty e series.
Its a stack of f*ck shit, on top of itself niggaaaaaa
User avatar
falcon4life
Breaking Traction
Posts: 1288
Joined: August 4th, 2009, 10:25 am
Location: ipswich QLD

Re: Car crushing

Post by falcon4life »

BBQBurner wrote:
falcon4life wrote: 1g eb
and thats why we love them :D
is that what your implying gozza?
NUT347 wrote:Ali G hooked car battery's together with humans and managed to blow a safe open so I can't see why not.
Current toy: 2014 Holden Colorado LTZ space cab manual
Goes anywhere and can pull a skid
Post Reply