Coyote's EL XR6

[Coyote mk3]

Hello all, I'm new here and I thought I would post up some pictures of my first car which I have had for just over a year now.
It is a 1997 manual EL xr6 in Heritage green which I bought for $4,000 November last year. (best buy ever )

Here are some pics of it and what I have done to it over the last year.

when I first got it home it had the clear peeling on the bonnet, spoiler and top or rear bar






these were the first things fixed up

to


and

to,

I also got some plates for it CYO73 (Coyote) last name Wylie



The next that that had to happen was to change those wheels. I got a set of FTR's for $550 from ebay


L-plater going slideways always good


Then the next thing that had to be done was the EL xr bodykit
I also got this for around $500 on ebay, and dad and I sanded it back, painted and fitted it in a couple of days





I then got offered a set of headers for $100, well I couldn't knock that back. So they went on


bit of a clean up in the bonnet
from this (when I first got it home

to


And then last week I got a 2.5" exhaust with single muffler put on, which is nice. (I know pic shows bugger all)


small video of exhaust sound (if It works)
Might want to turn up a bit too, only taken with my phone so it is a bit quiet
Also you can only really hear it with decent computer speakers, I tried with some cheap ones and it sounded crap. But sounds good with my good ones.(well to me anyway)


And that's it.
Next on my list is the slightly larger Tickford rear wing that goes with the kit and tinted windows

[Coyote mk3]

Now, some photos that I have taken while it's been finished (some of the night ones were taken tonight)








got these tips put on with the exhaust (going to gold plate them soon)


small photoshop with the bonnet and black background


With my brothers EF XR6


Hope you like
(oh, I can't go for my P's until End of January as I need to be 17 )

[needfordspeed]

You've done well mate, good stuff, any more plans for the future?

[freerider]

looks mint as

[Coyote mk3]

Thanks, probably just going to do the CAI in the near future.
oh and I may be getting a high flow cat put on soon too, that's about all I can think of.

I was also thinking about lowering it, but I still want it very drivable and it is surprising how low the front splitter bit is now, would be a PITA if it was much lower I think

[rat]

looks mint man you have done a great job with the paint. did you do the bonnet and rear at home?
you wont regret lowering it will look heaps better and handle nicely too. i'd recommend some h/d swaybars too for good handling

[Coyote mk3]

Cheers,
the rear was done by us, but I got the bonnet done by a panel beater for $350

[vegabass]

Well, its almost a replica of my old car.

Im sure you and your old man remember how competitve my old car was at the various track days.

Stick a nice mid range cam in and you will give all those B series folk in that qld club a good run for their money.

[Coyote mk3]

Yes I remember your old beast. Was an awesome car that!

I have never looked into cams, would be good though.
How much would I be looking at for a mid range cam?

Speaking of that club, I took out best E series for this year (only out of about 10-15 cars, but still I was stoked)

[vegabass]

I can see why, looks great.

I used all Jim Mock Motorsport stuff which at the time cost a bit but was worth every cent in my opinion.

Lots of options for cams, Id be looking at surecam or wade. should be less than $200.

Surecam seem to be great at custom grinds, so Id give them a buzz and tell them you want the fattest mid range they can offer.

I rarely reved my old set up past 5000 because 2500 -5k was so good!
you can see i had a fair whack of torque from low all the way to 5 grand. Thats why it was so good at club events

[travs ea-xr6]

what cam and setup was that vegabass

[vegabass]

Well I ordered a old DEV2 kit and well I think a DEV3HL is what I ended up with. I have to admit that it was set up well with vernier cam gears and what not.

[toohey_08]

sick xr6 looks mint

[Coyote mk3]

Thanks mate, hoping for Tickford rear wing and window tint before the end of February

[Coyote mk3]

Well I finally got to go for the driving test today, and I passed lol

so I took a pic with them on...it at least looks better then the bright yellow and black plates
[/QUOTE]

[stevo]

Congrats, car looks mint btw

[kocho]

i love heritage green el's with the body kit
you have done a good job on it

[Coyote mk3]

Thanks guys, It's great to finally have the freedom of going where i want when i want.

(I posted these up in art section, but i thought i would put them in here too )
I went down the the local carpark and took some pics of it on wednesday. Was quite happy with how the pics came out.

[huggiebear]

looking awesome, did you repaint the panels or is there something in that bottle we need to know about? looks amazing

[Coyote mk3]

Thanks mate,
No, the only bits on it that have been resprayed are the bonnet, spoiler, top of rearb/ bar, bottom left hand of front b/bar and the bodykit (painted it before we fitted it)
(These bits were done very soon after I got it though - 8th photo down it was all done bar the bodykit)

I wish it looked as good as it does in these pics lol
Not saying its that bad, but I would love to get it a respray when I end up with more money then I know what to do with.

The rest of it was made 10x better with a good cut and polish.

[Jet]

[huggiebear]

and your point is?? its a UHF aerial, its how they are, there is no stealth way to install them otherwise you simply wont get reception

[Misterel]

ideally they should be mounted in the center of the vehicle for the best reception.

[Coyote mk3]

It really doesn't look that bad in the flesh, it is slightly smaller then the one for the radio on the front guard, which is down in these pics.
I am quite happy with where it is and it serves it's purpose very well.

[Snaken]

you and your brother love to give old Wile E. Coyote a flogging lol... warner brothers should sue your ass
nice car though

[Coyote mk3]

you and your brother love to give old Wile E. Coyote a flogging lol... warner brothers should sue your ass
nice car though

lol, thanks mate.
Well it is spelt differently
In our family we have 4 "Coyote" Style plates,
CYO73, COY07, COYO T and CY OTE.
It is just sort of a nickname that we got because of our last name, and it has stuck.

[vegabass]

My old EL had a UHF and a VHF aerial, I used it for communications between VKG NSW Police and our VHF and UHF repeaters. I used to be primary response for rescue. No one ever wanted to race me....

[vegabass]

Here is a pic, there was one on either side. In a bigger pic of my avatar there is a winnie pooh holding on to dear life from one of aerials.

[Coyote mk3]

Yeah, that is the same aerial that Dad, Wyn and My brother have. Mine is the same height, if not slightly smaller then them.
They are quite handy and don't really stand out that much IMO

[justa6]

man you've done a bloody good job ay. your pretty good with a camera too, some of those picture's look unreal. would love to learn how to do that sort of stuff.

[ELXR_96]

Ef tail lights, dark tint and slam it. Sex!

[slyEFt]

^^ I agree, EF taillights a must!

[Coyote mk3]

Cheers guys,

Yeah I have considered the EF tail lights, not sure yet though. I know am one of the few, but I don't really mind the EL tail lights.
The tint is one of the next things on my list, but I haven't got a great deal of $ at the moment, so it will just have to wait a bit longer.
I don't think I will lower it for year or two though, mostly because there are a few other things I would like to do first and I am looking to get into an apprenticeship after I finish school this year so $ will be a problem for a while.

but anyway, here are some photos I took the other day. Was polished about 3 weeks ago, but was a little dusty when i took these.






Thanks again,
Matt

[GazzaXR6]

Hey I was wondering if you could tell me how you got your red inserts looking so good or did you get new ones, because I bought a EL XR6 the exact same colour as yours recently and mine are a bit faded.

[freerider]

Hey I was wondering if you could tell me how you got your red inserts looking so good or did you get new ones, because I bought a EL XR6 the exact same colour as yours recently and mine are a bit faded.

try cut and polish.. might aswell do the whole car too.. bit of elbow grease never goes astray

[Coyote mk3]

try cut and polish.. might aswell do the whole car too.. bit of elbow grease never goes astray

Yep, as long as they aren't too bad a cut and polish will bring them up.

[ELXR_96]

Apparently because there after market i had the same ones and them same problem. Used a buffer and all and they stayed the same. Just pull them off and paint them. Easy as to take them off. Lower the car. I'd almost give you a set of supers for free to stick in the ass cause it's to high

[GazzaXR6]

Thank you I will give it a shot, my uncle worked for a crash repair and thinks he has a gel to bring them up I'll give that a shot if not I'll try a cut and polish.

[vegabass]

Get rid of that XR club sticker or Ill personally drive to QLD and after removing it myself will promptly kick you in the shins. Twice.

[Coyote mk3]

The small front one will be going soon.
I am going to get a new bonnet protector sometime soon as a couple of months ago a stone hit it and cracked it. I won't be replacing the sticker.
The crack is not too bad though (can't see it in those last set of photos)

Driving for a wedding in July so it will be off before then.