HYPO-NL The Fairlane Ghia Concorde - 15.1 @ 92.39mph

SLY5LT · Post by **SLY5LT** » June 10th, 2010, 3:19 am

[quote="NL_CONCORDE" im now thinkin of
selling the ltd buying a cheap daily taking the lane off gas and get some form of forced induction[/quote]

maybe keep the LTD & sell the 'lane as the 'lane has given you more problems ?

BROCKYB8 · Post by **BROCKYB8** » June 10th, 2010, 9:12 am

SLY5LT wrote:[quote="NL_CONCORDE" im now thinkin of
selling the ltd buying a cheap daily taking the lane off gas and get some form of forced induction

maybe keep the LTD & sell the 'lane as the 'lane has given you more problems ?[/quote]

I agree with this tottally ,.

KR1STO · Post by **KR1STO** » June 10th, 2010, 9:54 am

yep.. me too..!
those ltd's are awesome..
and it's an 8!!

Post by **pHaT`eL** » June 10th, 2010, 4:41 pm

Slammed gassed LTD cruiser and a cheap shitter daily

NL_CONCORDE · Post by **NL_CONCORDE** » June 10th, 2010, 7:40 pm

Guess i have 2 rareish cars so for now thinkin i might hold onto the LTD but the lane i could never part with
cant wait to blow a set of tyres in the LTD wanted to charge it
also lookin out for vicroads cars over the long weekend

KR1STO · Post by **KR1STO** » June 10th, 2010, 7:55 pm

yeah i heard that on the radio about vicroads..
i reckon keep them both now man.. had a think about it..haha

ronza · Post by **ronza** » June 10th, 2010, 10:05 pm

Hey mate looks ace on ltd wheels ...
hmmm i think keep both if can afford too ...

What happened to ya AU mont mate...

NL_CONCORDE · Post by **NL_CONCORDE** » June 10th, 2010, 10:12 pm

ronza wrote:Hey mate looks ace on ltd wheels ...
hmmm i think keep both if can afford too ...

What happened to ya AU mont mate...

Yeah thats the one you came up to rye for the headlight exchange

Still sittin at dynomech in lillydale on moorondah hwy last i saw...
now without lowered lovells i'll have to put up more pics of it up...
Undercarriage was just as clean

ronza · Post by **ronza** » June 10th, 2010, 10:33 pm

NL_CONCORDE wrote:
ronza wrote:Hey mate looks ace on ltd wheels ...
hmmm i think keep both if can afford too ...

What happened to ya AU mont mate...
Yeah thats the one you came up to rye for the headlight exchange

Still sittin at dynomech in lillydale on moorondah hwy last i saw...
now without lowered lovells i'll have to put up more pics of it up...
Undercarriage was just as clean

ha ha yeah thats the one mate was nice mont im still a big fan of AU's and yeah wanna build up mine nice ... ahh it will happen...

NL_CONCORDE · Post by **NL_CONCORDE** » June 12th, 2010, 11:15 pm

well last nite thought i had a noisy lifter but later on found out it wasnt the lifter at fault
but the sound of the 2nd motor on the way another 1 gone in the nl

KR1STO · Post by **KR1STO** » June 12th, 2010, 11:22 pm

no good man....
what are you gonna do..?

NL_CONCORDE · Post by **NL_CONCORDE** » June 13th, 2010, 6:37 pm

KR1STO wrote:no good man....
what are you gonna do..?

Get another engine as i have a el 5 speed lined up in the coming months
engine will get a j3 tune with a wade cam to suit and gas will be taken off
will find a cheap daily and keep both luxo's

KR1STO · Post by **KR1STO** » June 13th, 2010, 9:02 pm

glad to hear man....!!

NL_CONCORDE · Post by **NL_CONCORDE** » June 13th, 2010, 11:06 pm

Just so you know our new cheap daily is a rolla ke55 pick it up next weekend it only has 132,000k's on the clock
1.3 Litre 3 speed auto now to get it reg'd and finally save money n pay my debts
wont mod it as its pretty much all original no welded diff for this one
so there you have it new cheap daily and it will be more reliable than the lane

SLY5LT · Post by **SLY5LT** » June 14th, 2010, 1:56 am

nice work joel

NL_CONCORDE wrote:so there you have it new cheap daily and it will be more reliable than the lane

depends on how you drive it

EBOOST · Post by **EBOOST** » June 14th, 2010, 9:43 am

nah iuts a toyota doesnt matter how u treat it they love it lol.
i think having 3 regos and insurance's would get to expensive for me on 1 wage but if u can afford it then go for it.
ur concorde is nice tho man i was with grechie at calder last time and i liked it.
goes well for a fairlane aswell.
good luck with the next engine mate.
cheers josh.

NL_CONCORDE · Post by **NL_CONCORDE** » June 19th, 2010, 11:12 am

thanks josh and the rolla is my other 1/2's and she has consession so its good
be cheap n reliable as for the lane think i found a el engine with 164,000k's
so be lookin into that in the coming weeks and gettin the lane running and respect it
but plan to do a complete rebuild on the matching numbers engine

SLY5LT · Post by **SLY5LT** » July 10th, 2010, 2:25 pm

any update's joel ?
will it be ready for the 2 meet's coming up ?

NL_CONCORDE · Post by **NL_CONCORDE** » July 10th, 2010, 6:12 pm

SLY5LT wrote:any update's joel ?
will it be ready for the 2 meet's coming up ?

Well with the epa fine comin and costing $564 and just paying the rego on the LTD
its not looking likely for the aff meet as lane wont be ready thats 2 from 2
as for the lane its still sittin under a car cover but will be pickin up a AUII engine
as for the sump thats almost sorted

SLY5LT · Post by **SLY5LT** » July 10th, 2010, 6:28 pm

NL_CONCORDE wrote:its not looking likely for the aff meet as lane wont be ready thats 2 from 2
as for the lane its still sittin under a car cover but will be pickin up a AUII engine
as for the sump thats almost sorted

drag the 'rolla

NL_CONCORDE · Post by **NL_CONCORDE** » July 10th, 2010, 6:54 pm

SLY5LT wrote: drag the 'rolla

Thinkin of takin the LTD at the moment if im not workin

SLY5LT · Post by **SLY5LT** » July 10th, 2010, 6:58 pm

it's only a couple of week's off now, ya better pull ya finger out

is the LTD still running rich ?
maybe replace the o2 sensor's ? it worked for me on the 'lane.

NL_CONCORDE · Post by **NL_CONCORDE** » July 10th, 2010, 7:05 pm

SLY5LT wrote:it's only a couple of week's off now, ya better pull ya finger out
is the LTD still running rich ?
maybe replace the o2 sensor's ? it worked for me on the 'lane.

LTD seems to be runnin fine just coolant sensor and heater tap need replacing
Fitted x-series 14 inch wheels on the rear last night for no particular reason runs at 15.4l/100km's
i know the LTD will run 15.9 at the track its very smooth through rev range wanting a tezza shift kit though
and is dwell another term for timing?

huggiebear · Post by **huggiebear** » July 10th, 2010, 7:38 pm

you got 14's on the back? i thought EF onwards have the ridges on the calipers stopping the 14's from fitting, my old EL wagon and my gf's dads EF wagon both have that issue...

NL_CONCORDE · Post by **NL_CONCORDE** » July 10th, 2010, 7:49 pm

huggiebear wrote:you got 14's on the back? i thought EF onwards have the ridges on the calipers stopping the 14's from fitting, my old EL wagon and my gf's dads EF wagon both have that issue...

Always heard bout that but never had this issue and had the wheels approx 2yrs now.
these wheels been on both the lane and now ltd and havnt had a problem..
there actually stamped fomoco not ford it means the same though just pre80's i reckon.
bottom line is they smoke without an issue.
only issue i had last nite was goin through the windies near dromana in the ltd.
80km/h bumpy road riding on ultra lows exhaust scrapes and sparks.
love cruisin down that road.

NL_CONCORDE · Post by **NL_CONCORDE** » July 14th, 2010, 7:16 pm

pHaT`eL wrote:Slammed gassed LTD cruiser

LTD-Puttin 6cyl kings ultra lows in the rear hope it gives it the slammed look
n fit up the ltd rims again
i'll put up pics after i fitted the springs

As for the lane rippin it off gas taking out the towpack droppin in the au motor when the sump returns
puttin a factory system back on and thats bout it for now..
hope to have it back out on the 25th july no track for a lil while

NL_CONCORDE · Post by **NL_CONCORDE** » July 19th, 2010, 10:16 pm

When i pulled the lane engine down and then discovered what my issue was...with engine#2

As for the LTD was told by previous owner it has super lows all round bout 1 year ago
well i think someone was talking sh!t as i pulled out rear lows
so NOW it has super lows all round and this is how it looks now(Before n After)

KR1STO · Post by **KR1STO** » July 19th, 2010, 10:22 pm

love the AFTER shot...
Looks great man!!

NL_CONCORDE · Post by **NL_CONCORDE** » July 19th, 2010, 10:31 pm

yeah it rides better also
Thanks Seany n Pete for the suggestion
It was a matter of getting the motorvation as i had the springs to fit in the lane
but thought the LTD hasnt let me down so i'll dump it instead needed it too

NL_CONCORDE · Post by **NL_CONCORDE** » July 20th, 2010, 7:05 pm

pHaT`eL wrote:Slammed gassed LTD cruiser

Post by **pHaT`eL** » July 22nd, 2010, 4:49 pm

6Cyl fronts FTW!

NL_CONCORDE · Post by **NL_CONCORDE** » July 22nd, 2010, 8:07 pm

pHaT`eL wrote:6Cyl fronts FTW!

It has v8 super lows up front but that can be changed with the lane which has 6cyl super lows
k-frame already hits the ground when im driving through the peninsula in the LTD

wet one · Post by **wet one** » August 22nd, 2010, 6:51 pm

KR1STO · Post by **KR1STO** » August 22nd, 2010, 6:58 pm

WTF...???
Its not exactly low....

LOW_XR · Post by **LOW_XR** » August 22nd, 2010, 7:04 pm

get that holden shit off these forums kent, before all the one eyed ford boys cry

burnt turtle · Post by **burnt turtle** » August 22nd, 2010, 7:12 pm

geez that is really low..............why in this thread?

NL_CONCORDE · Post by **NL_CONCORDE** » August 22nd, 2010, 8:35 pm

There's only Person i know who would have those plates
My Best Mate Paul his mum had a mazda which had these plates from factory
guess the mazda finally seen the end of the road hey bro

wet one wrote:

NL_CONCORDE · Post by **NL_CONCORDE** » August 22nd, 2010, 8:37 pm

This is what happened to engine #2 in the concorde
3 holes through the sump and this 1 through the block

huggiebear · Post by **huggiebear** » August 22nd, 2010, 8:59 pm

new turbo return line?

KR1STO · Post by **KR1STO** » August 22nd, 2010, 9:02 pm

NL_CONCORDE wrote:This is what happened to engine #2 in the concorde
3 holes through the sump and this 1 through the block

how do you keep doing this man...?