Putting in new speaekrs , How to pull out front speakers?

This is a general discussion forum, open to all participants

Putting in new speaekrs , How to pull out front speakers?

Postby vey » July 12th, 2009, 3:48 pm

hey guys , got myself some new speakers to replace the blown up ford ones for the front (4")

how do i pull these mo fo's off ?? i cant figure it out.

cheers.

hopefully i can do this b4 it rains :D
User avatar
vey
Idling
 
Posts: 136
Joined: May 3rd, 2009, 7:05 pm
Location: sydney
Has Liked: 0 time
Been Liked: 0 time

Re: Putting in new speaekrs , How to pull out front speakers?

Postby holmsy » July 12th, 2009, 3:55 pm

undo screws around the door panel. pretty easy to see.
then the screws in the door handle and winder winder. pull them out
pull the door lock tab out.
push door skin up and out.
undo the 3 screws holding the speaker in and pull it out and unplug it.
pretty simple
Project: SLOXR8: 1994 EF XR8, mech shift kit, 3500 histall, Lokka, 36lb injectors, AU 185 motor, Cranecam 444225, crane roller rockers, crow valve springs, Pacies, 3" exhaust, hiflo cats. twin 044's, vortech v2,microtech tuned by daltons (290.3rwkw @11psi) at DALTONS
Image
User avatar
holmsy
Shooting Flames
 
Posts: 6473
Joined: August 2nd, 2007, 11:07 pm
Location: Geelong
Has Liked: 182 times
Been Liked: 154 times

1994 Ford XR8

Re: Putting in new speaekrs , How to pull out front speakers?

Postby Dezza » July 12th, 2009, 4:08 pm

4 screws in EA
Project: 1990 EAII Ford Fairmont Ghia - Platinum Silver
4.0i XR6 motor with BBM, T5 manual, Scorcher bar, sprint kit, XR front & rear lip, SVO rims, EL handles, mirrors & fuel flap, extractors, 2.5" exhaust, heaps more

Daily 2010 FG XR50T ute - Lightning Strike
6 speed manual, Leather, 19" option rims, hardlid
User avatar
Dezza
Breaking Traction
 
Posts: 1588
Joined: July 15th, 2007, 7:10 pm
Location: Glen Waverley
Has Liked: 6 times
Been Liked: 5 times

1990 Ford Fairmont

Re: Putting in new speaekrs , How to pull out front speakers?

Postby campbell18 » June 28th, 2010, 10:54 am

does the door lock tab pull out by hand?? i dont want to go breaking anything :?
User avatar
campbell18
Idling
 
Posts: 154
Joined: August 5th, 2009, 8:18 pm
Location: cranbourne, victoria
Has Liked: 0 time
Been Liked: 0 time

1993 Ford Falcon

Re: Putting in new speaekrs , How to pull out front speakers?

Postby holmsy » June 28th, 2010, 10:58 am

yeh just pull it hard.
Project: SLOXR8: 1994 EF XR8, mech shift kit, 3500 histall, Lokka, 36lb injectors, AU 185 motor, Cranecam 444225, crane roller rockers, crow valve springs, Pacies, 3" exhaust, hiflo cats. twin 044's, vortech v2,microtech tuned by daltons (290.3rwkw @11psi) at DALTONS
Image
User avatar
holmsy
Shooting Flames
 
Posts: 6473
Joined: August 2nd, 2007, 11:07 pm
Location: Geelong
Has Liked: 182 times
Been Liked: 154 times

1994 Ford XR8

Re: Putting in new speaekrs , How to pull out front speakers?

Postby campbell18 » June 28th, 2010, 2:24 pm

it took a bit of grunting but it finally came off
ended up using a cloth and some pliers
cheers for the help
User avatar
campbell18
Idling
 
Posts: 154
Joined: August 5th, 2009, 8:18 pm
Location: cranbourne, victoria
Has Liked: 0 time
Been Liked: 0 time

1993 Ford Falcon

Re: Putting in new speaekrs , How to pull out front speakers?

Postby holmsy » June 28th, 2010, 2:55 pm

yeh they can be hard to grab sometimes.
just remember when you put it back on.lock the doors (so you will need the window down. or sit in the car with door shut.
pull slide the white bit out from the knob that you pulled off. (comes out maby 5-10mm)
and then put it back in
Project: SLOXR8: 1994 EF XR8, mech shift kit, 3500 histall, Lokka, 36lb injectors, AU 185 motor, Cranecam 444225, crane roller rockers, crow valve springs, Pacies, 3" exhaust, hiflo cats. twin 044's, vortech v2,microtech tuned by daltons (290.3rwkw @11psi) at DALTONS
Image
User avatar
holmsy
Shooting Flames
 
Posts: 6473
Joined: August 2nd, 2007, 11:07 pm
Location: Geelong
Has Liked: 182 times
Been Liked: 154 times

1994 Ford XR8

Re: Putting in new speaekrs , How to pull out front speakers?

Postby campbell18 » June 29th, 2010, 12:29 pm

yeh that might explain why the tabs are sticking up to high and the doors wouldnt lock last night :)
its no good installing new speakers when you cant lock your car
ill tackle that this arvo

cheers mate
User avatar
campbell18
Idling
 
Posts: 154
Joined: August 5th, 2009, 8:18 pm
Location: cranbourne, victoria
Has Liked: 0 time
Been Liked: 0 time

1993 Ford Falcon


Return to General Discussion

Who is online

Users browsing this forum: No registered users