LIMO8U 95 NF Fairlane ghia NOW DUMPED ON WALLS :-)

Post by **pHaT`eL** » November 30th, 2010, 3:40 pm

Love em, suit the colour very well!

LIMO8U · Post by **LIMO8U** » November 30th, 2010, 4:11 pm

Shum wrote:The wheels suit it real well. Have ya got rid of the yellow plates yet?

yea man got rid of em when i transferred it

Dumpsta · Post by **Dumpsta** » November 30th, 2010, 4:18 pm

The rims look great mate, perfect. Some more pics ay..?

LIMO8U · Post by **LIMO8U** » November 30th, 2010, 5:12 pm

yea ill get more up when theres decent weather, shithouse up here at the moment

josh_ef · Post by **josh_ef** » November 30th, 2010, 6:06 pm

wheels look tops mate, car is coming along well

LIMO8U · Post by **LIMO8U** » December 1st, 2010, 4:50 pm

quick pic after work. also tried upgrading the globes in my cornering lamps too $50 a piece LED ones as my headlights are Bluey white and they are yellow. massive fail.... they wont work, does anyone know if its because they are too low a resistance or???

Sloxr6 · Post by **Sloxr6** » December 2nd, 2010, 5:30 am

Damn they suit it really well better than I thought they would.

Post by **pHaT`eL** » December 2nd, 2010, 12:53 pm

Hot! Not a fan of the eyelids though.

Also, nitpicking here, but its Argon Silver, not blue

DVS006 · Post by **DVS006** » December 2nd, 2010, 2:11 pm

Good Looking Ride mate, Rims suit it to a T.
And I'm a fan of the eyelids... they're different.
Did u make them? Would be interested to see how its done

LIMO8U · Post by **LIMO8U** » December 2nd, 2010, 5:37 pm

Yea made em from fibreglass. im a fan of things that catch ppls eye and make my cars unique. id never seen eyelids on a falcon/fairlane before so gave em a crack

wicksy · Post by **wicksy** » December 2nd, 2010, 7:27 pm

That fairlane is sex. End story

LIMO8U · Post by **LIMO8U** » December 2nd, 2010, 7:30 pm

wicksy wrote:That fairlane is sex. End story

cheers mate, nowhere near finished yet

LIMO8U · Post by **LIMO8U** » December 2nd, 2010, 7:39 pm

just ordered and payed for my 80mm (plug and play, no tune required) MAF sensor. a guy put me onto 1 as he has put all types of bits to the test on his 5L 'test bench' and showed me graphs of AU 75mm mafs and 80-85mm cheapies slapped on an e series causes them to lean out up top and i certainly do not want that lol so got this 80mm one thats an import from the states and is plug n play and also sends the same maf signals to the computer therefore the car doesnt know its been put there but has no restriction and a longer maf table for more fuel at higher revs. cant wait to see what difference it makes

burnt turtle · Post by **burnt turtle** » December 3rd, 2010, 6:03 am

LED's are one way mate, try turning them around if you can plug them in 2 ways

Hybrid34 · Post by **Hybrid34** » December 3rd, 2010, 6:09 am

burnt turtle wrote:LED's are one way mate, try turning them around if you can plug them in 2 ways

From memory, turning them around wont work, (if your talking about the cornering lamps), due to them being polarity sensitive you'll have to switch the positive on the wiring harness to negative n vice versa.

Cheers
- As.
**Did this 'conversion" to my lane,.

Post by **pHaT`eL** » December 3rd, 2010, 10:00 am

LIMO8U wrote:just ordered and payed for my 80mm (plug and play, no tune required) MAF sensor. a guy put me onto 1 as he has put all types of bits to the test on his 5L 'test bench' and showed me graphs of AU 75mm mafs and 80-85mm cheapies slapped on an e series causes them to lean out up top and i certainly do not want that lol so got this 80mm one thats an import from the states and is plug n play and also sends the same maf signals to the computer therefore the car doesnt know its been put there but has no restriction and a longer maf table for more fuel at higher revs. cant wait to see what difference it makes

Got a price on one of these MAFS??

Post by **EFFalcon** » December 3rd, 2010, 10:15 am

Hybrid34 wrote:
burnt turtle wrote:LED's are one way mate, try turning them around if you can plug them in 2 ways
From memory, turning them around wont work, (if your talking about the cornering lamps), due to them being polarity sensitive you'll have to switch the positive on the wiring harness to negative n vice versa.

Cheers
- As.
**Did this 'conversion" to my lane,.

I think thats what burnt turtle was suggesting

LIMO8U · Post by **LIMO8U** » December 3rd, 2010, 2:07 pm

burnt turtle wrote:LED's are one way mate, try turning them around if you can plug them in 2 ways

lol thanks mate but im not silly.... plus they were bayonet type that work either way, well they were meant too

LIMO8U · Post by **LIMO8U** » December 27th, 2010, 9:46 am

havent updated this much lately, been flat out. but ive gathered up some more bits for my engine, ill get pics up later

rat · Post by **rat** » December 30th, 2010, 10:26 am

Looks so pimpin with the 20's! love it. Eyelids are sweet too.

LIMO8U · Post by **LIMO8U** » January 1st, 2011, 7:03 pm

thanks mate

xrghiawagon · Post by **xrghiawagon** » January 1st, 2011, 7:32 pm

hows the little bit of extra woodgrain coming along?

LIMO8U · Post by **LIMO8U** » January 1st, 2011, 10:13 pm

havent got it in yet dude, ill be sure to smash up some pics when its in :-)

LIMO8U · Post by **LIMO8U** » January 2nd, 2011, 4:01 pm

had a good day at jollys today, picked up a full set of grey leather seats for the NF in good nick. drivers 1 just needs a slight bit of repair but for $120 whos complaining! need to get some more pics up soon i think

LIMO8U · Post by **LIMO8U** » January 7th, 2011, 12:16 am

new diff today :-D Picks up alot better. just need an explorer manifold and i have most of my 220kw AU gear which will open her up alot

LIMO8U · Post by **LIMO8U** » January 13th, 2011, 12:29 pm

Bit of an update: New EL GT Inspired dash with Genuine EL GT MOMO

New Leather seats

80mm MAF

68mm EL GT T/B

Stainless EL GT Extractors (do need a clean up)

DL LTD grill (finally got 1)

Parfrey · Post by **Parfrey** » January 13th, 2011, 1:28 pm

looking good mate, i like the dash like that.
What brand is the maf? how much did it set you back?

LIMO8U · Post by **LIMO8U** » January 13th, 2011, 2:02 pm

not sure of brand. it was $215 posted

89.SVO · Post by **89.SVO** » January 15th, 2011, 1:36 pm

looks pimpin

LIMO8U · Post by **LIMO8U** » January 15th, 2011, 2:31 pm

yea thats the new look ^^^^^

bet me too puttin a pic up

Post by **pHaT`eL** » January 15th, 2011, 5:35 pm

I cant see venetians in the back window though?

Graham · Post by **Graham** » January 15th, 2011, 5:48 pm

dam man this thing loooks hot! nice car cant wait to see the turbos go in

Grambo~

89.SVO · Post by **89.SVO** » January 15th, 2011, 6:20 pm

the tints too dark

LIMO8U · Post by **LIMO8U** » January 15th, 2011, 8:34 pm

yea ive been contemplating venetians for a while but the tint would hide em too much to bother

Post by **EFFalcon** » January 15th, 2011, 8:56 pm

dumped on 20's, you're just copying Ghiaon20z

89.SVO · Post by **89.SVO** » January 15th, 2011, 8:57 pm

and your meant to be a mod. stop the shit, not cause more

Post by **EFFalcon** » January 15th, 2011, 8:59 pm

I'm not a mod, i'm an administrator.
I stand for whats good and proper, don't like it?
leave.

Post by **needfordspeed** » January 15th, 2011, 10:12 pm

Haha, go John

89.SVO · Post by **89.SVO** » January 15th, 2011, 10:15 pm

the funny thing is that everyone seems to have a problem with me but at C4C no one said anything.

and last Friday i pulled into Chaddy maccas and a few boosted guys were there, all i heard was "hey look, it's everyones mate"

i pulled up, was there for about an hour, no one said a thing.

travs ea-xr6 · Post by **travs ea-xr6** » January 15th, 2011, 10:16 pm

you dont have to ask him to leave john all you need to do is press the big button