N/A I6 power?

This is a general discussion forum, open to all participants

N/A I6 power?

Postby Amon » December 21st, 2007, 9:04 pm

Just curious, wat sort of power are ppl getting out of their N/A 6's...
Beef or chicken ming mongs
User avatar
Amon
Breaking Traction
 
Posts: 1426
Joined: October 16th, 2007, 12:23 pm
Location: Eastern Suburbs, Melbourne
Has Liked: 0 time
Been Liked: 2 times

1994 Ford XR6

Re: N/A I6 power?

Postby XR8TickfordBoy » December 21st, 2007, 9:18 pm

From what I know 150-160RWKW NA without a tune.
170-190 with a good tune.
That will be running high compression and a hell of alot of pinging without a decent tune.
I think Grechie is in the 13's now with an NA 6.
Correct me if im wrong.
94 EF XR8-Monza Red, Custom Rear Bar, AU V8, Pacemaker Extractors, Twin 2.5" Cats, Single 3" Exhaust, Rebuilt Auto, Stage 2 Shift Kit & 2,500RPM Stall, Rebuilt LSD Diff with 4.11 Gears, King Ultra's, pedder's Shocks, NL Concorde Rims.
User avatar
XR8TickfordBoy
Idling
 
Posts: 166
Joined: July 13th, 2007, 7:49 pm
Location: Narre Warren
Has Liked: 0 time
Been Liked: 0 time

Re: N/A I6 power?

Postby XR8TickfordBoy » December 21st, 2007, 9:19 pm

F**K this is pissin me OFF!
Last edited by XR8TickfordBoy on December 21st, 2007, 9:24 pm, edited 1 time in total.
94 EF XR8-Monza Red, Custom Rear Bar, AU V8, Pacemaker Extractors, Twin 2.5" Cats, Single 3" Exhaust, Rebuilt Auto, Stage 2 Shift Kit & 2,500RPM Stall, Rebuilt LSD Diff with 4.11 Gears, King Ultra's, pedder's Shocks, NL Concorde Rims.
User avatar
XR8TickfordBoy
Idling
 
Posts: 166
Joined: July 13th, 2007, 7:49 pm
Location: Narre Warren
Has Liked: 0 time
Been Liked: 0 time

Re: N/A I6 power?

Postby XR8TickfordBoy » December 21st, 2007, 9:19 pm

Double Post. (Crap Broadband!)
94 EF XR8-Monza Red, Custom Rear Bar, AU V8, Pacemaker Extractors, Twin 2.5" Cats, Single 3" Exhaust, Rebuilt Auto, Stage 2 Shift Kit & 2,500RPM Stall, Rebuilt LSD Diff with 4.11 Gears, King Ultra's, pedder's Shocks, NL Concorde Rims.
User avatar
XR8TickfordBoy
Idling
 
Posts: 166
Joined: July 13th, 2007, 7:49 pm
Location: Narre Warren
Has Liked: 0 time
Been Liked: 0 time

Re: N/A I6 power?

Postby EDFalcon » December 21st, 2007, 9:47 pm

assuming we're talking e-series 6cyl then 170-190 rwkw is a bit high isnt it??? could be wrong but i thought WITH a tune the 6 was only hitting 160 tops. as you said though, correct me if i'm wrong!!
Image
User avatar
EDFalcon
Breaking Traction
 
Posts: 1077
Joined: August 26th, 2007, 6:41 pm
Location: Wheelers Hill
Has Liked: 0 time
Been Liked: 2 times

Re: N/A I6 power?

Postby Damo » December 21st, 2007, 9:57 pm

There are couple of 4.0 bangers on here with 168 rwkw (realistic figures).

The average sorta mark is around 120-140 rwkw for a cammed i6 with exhaust and intake mods.

ET&MPH > RWKW
Damo
Full Boost
 
Posts: 2589
Joined: July 13th, 2007, 8:16 pm
Has Liked: 0 time
Been Liked: 3 times

Re: N/A I6 power?

Postby Damo » December 21st, 2007, 10:00 pm

XR8TickfordBoy wrote:From what I know 150-160RWKW NA without a tune.
170-190 with a good tune.
That will be running high compression and a hell of alot of pinging without a decent tune.
I think Grechie is in the 13's now with an NA 6.
Correct me if im wrong.

Grechies best was a 14.3 or 14.4, then he got the suspect dyno readings. I seen a photo of his car on FullBoost.com when I was looking at the HiBoost photos from last friday. No idea how he went though ? did he post some results on AFF ?
Damo
Full Boost
 
Posts: 2589
Joined: July 13th, 2007, 8:16 pm
Has Liked: 0 time
Been Liked: 3 times

Re: N/A I6 power?

Postby John_LS1 » December 21st, 2007, 10:02 pm

I had 146 rwkw and a 14.6 1/4 in my old ED.
VZ Berlina 408 stroker, TH400 with TCE 4500 converter, 3.9's with trutrac, difilippo 1 7/8 headers and 3 inch Exhaust.
User avatar
John_LS1
Spooling Up
 
Posts: 749
Joined: July 16th, 2007, 1:11 am
Has Liked: 2 times
Been Liked: 4 times

Re: N/A I6 power?

Postby EBOOST » December 22nd, 2007, 12:33 pm

grechie did 174rwkw but with no intake piping pulled 169 with the pod and everything on.
and he pulled a couple of 14.5's the other week but he couldnt get off the line was getting 2.4-2.3 60'.
cheers josh.
Get Stroked!!
AU Stroked 5.6L Ghia.
User avatar
EBOOST
Hitting N2O
 
Posts: 3506
Joined: July 20th, 2007, 12:27 pm
Has Liked: 437 times
Been Liked: 93 times

Re: N/A I6 power?

Postby BLKPHN » December 22nd, 2007, 12:56 pm

ORSMEB - I have around 145-150rwkw..(not the most powerfull e series though..)
Strive for perfection in everything we do. Take the best that exists and make it better.
When it does not exist, design it. Accept nothing nearly right or good enough.


Image
User avatar
BLKPHN
Breaking Traction
 
Posts: 1363
Joined: August 15th, 2007, 6:17 pm
Has Liked: 7 times
Been Liked: 33 times

Re: N/A I6 power?

Postby Gubas » December 22nd, 2007, 5:01 pm

I got 137rwkw on mine. Straight LPG.
Petrol was 140, but with a smaller cam
2002 AU XR8 UTE. Tickford 200KW and bodykit.
79 P6 LTD, 5.8ltr V8, White and low, Tan leather interior -P6LTD8-
84 Mitsubishi Pajero, superwagon, 4 cyl 4WD
Gubas
Idling
 
Posts: 109
Joined: July 24th, 2007, 4:47 pm
Location: Geelong
Has Liked: 0 time
Been Liked: 1 time

Re: N/A I6 power?

Postby OED666 » December 22nd, 2007, 6:21 pm

dyno's are just useful for tuning, and bragging rights really. the black stuff is for finding out how quick it is. 13.82 @ 99.67MPH. :)
Image

Sundeep wrote:even though Falcon manuals are rough as guts. I just like smashing and skating through gears.
User avatar
OED666
Hitting N2O
 
Posts: 3792
Joined: August 3rd, 2007, 8:20 am
Location: At your mum's house, and she loves it!
Has Liked: 194 times
Been Liked: 121 times

1994 Ford Falcon

Re: N/A I6 power?

Postby Grechie » December 22nd, 2007, 10:33 pm

mine dyno'd in at CVE @ 174.2rwkw, not the most powerfull, but im happy.

I done 100mph in the heat last friday (i have a unboxed pod sitting in engine bay), with shitE 205's on the rear, managed a 14.627 with heaps of spin, 2.4 60 footers but still managed 100mph so im happy....best that night was 14.510, and my PB with 155rwkw was 14.433 at 96mph

- Grechie
Ford Falcon EA Naturally Aspirated 4.0L i6
13.797 @ 157.16km/h = 1/4 Mile Video
User avatar
Grechie
Cruising
 
Posts: 320
Joined: August 13th, 2007, 1:51 pm
Location: Werribee
Has Liked: 0 time
Been Liked: 1 time

1989 Ford Fairmont

Re: N/A I6 power?

Postby Damo » December 22nd, 2007, 11:05 pm

get some better tyres ffs, no one like excuses... trust me. lol

100 mph is gooooood though. :D
Damo
Full Boost
 
Posts: 2589
Joined: July 13th, 2007, 8:16 pm
Has Liked: 0 time
Been Liked: 3 times

Re: N/A I6 power?

Postby Rollin » December 22nd, 2007, 11:19 pm

My EB XR6 had 150rwkw with manual, cam, exhaust and more timing via twisting the dizzy.

Did 14.505@94.7mph, 1.9sec 60 with 3.9 diff gears.
Image

Look at your car. Now back to mine. Now back to yours. Now back to mine. Sadly, yours isn't mine. But if you stopped buying dodgy cars and bought an ED, yours could be like mine. Look down. Back up. Where are you? ...You're on BoostedFalcon, reading the signature your signature could be like! Anything is possible when your car looks like my car... I'm on a computer.
User avatar
Rollin
Melting Pistons
 
Posts: 7933
Joined: July 15th, 2007, 4:35 pm
Location: Brisbane - Driving around in a metal and glass case of emotion!
Has Liked: 327 times
Been Liked: 751 times

1994 Ford Falcon

Re: N/A I6 power?

Postby obriza » December 22nd, 2007, 11:49 pm

My EB has 146rwkw details as below, the 15.1 time was with 127.5rwkw. So now im guessing itll do mid-high 14s
Im pretty sure jmm claim you can get an e-series 6 up to 220rwkw IIRC, dont know about reliability with that though. Correct me if im wrong.
WORKD-6 herrod special EF XR6 was supercharged 204.3rwkw at 8 psi
now turbo with GT42 249.8rwkw at 13psi... Soon to be boosted up more once problems are sorted.
User avatar
obriza
Cruising
 
Posts: 250
Joined: July 13th, 2007, 7:02 pm
Has Liked: 1 time
Been Liked: 4 times

1995 Ford XR6

Re: N/A I6 power?

Postby EBOOST » December 23rd, 2007, 1:27 pm

yeah they claim to build all the dev6 engines to 220+rwkw.
but thatsd on the dyno but still would be roughly 190rwkw on a normal dyno.
i no someone on the jmm dyno ran 176rwkw then on another dyno 158 so roughly 20 or so rwkw loss.
cheers josh.
Get Stroked!!
AU Stroked 5.6L Ghia.
User avatar
EBOOST
Hitting N2O
 
Posts: 3506
Joined: July 20th, 2007, 12:27 pm
Has Liked: 437 times
Been Liked: 93 times

Re: N/A I6 power?

Postby needfordspeed » December 23rd, 2007, 2:30 pm

I've got 167.8rwkw, has run a few 99+ MPH passes with a best of 99.5MPH 14.4 was my best ET.

Specs are in my sig.
1988 EA S-Pack - 10.6@125MPH New build underway
User avatar
needfordspeed
Moderator
Moderator
 
Posts: 5256
Joined: July 13th, 2007, 2:13 pm
Has Liked: 110 times
Been Liked: 417 times

1988 Ford S Pack

Re: N/A I6 power?

Postby BLKPHN » December 23rd, 2007, 3:45 pm

BLKPHN wrote:ORSMEB - I have around 145-150rwkw..(not the most powerfull e series though..)



STEVE YOU CHEAKY HOW THE WAA ??? im sure this is my account.. ah well... pfft... meh ... ok im over it.
Strive for perfection in everything we do. Take the best that exists and make it better.
When it does not exist, design it. Accept nothing nearly right or good enough.


Image
User avatar
BLKPHN
Breaking Traction
 
Posts: 1363
Joined: August 15th, 2007, 6:17 pm
Has Liked: 7 times
Been Liked: 33 times


Return to General Discussion

Who is online

Users browsing this forum: No registered users