The Ev-olution continues - more lol's within

EF ECTIV · Post by **EF ECTIV** » January 26th, 2011, 1:39 am

had mine about 4-5 years now... just before I had the first turbo kit go on... has held up no dramas, like justin said
no noise or chattering either... drives like a stock diff... cant recommend it enough really...

dylby1 · Post by **dylby1** » January 26th, 2011, 2:12 am

mad_keen wrote:
NUT347 wrote:
When you said "I got one too!" I thought it was going to be a boosted falcon

I thought he ment a root..

i thought he meant an AU
since his username is classic AU

ClassicAU · Post by **ClassicAU** » January 27th, 2011, 7:42 am

EF ECTIV wrote:had mine about 4-5 years now... just before I had the first turbo kit go on... has held up no dramas, like justin said
no noise or chattering either... drives like a stock diff... cant recommend it enough really...

Wow, thats awesome mate, thanks heaps for the info!!

I just sold the shitbox Nissan yesterday, so the diff will be happening as soon as I can organise it. Still deciding which way to go, but at the moment am leaning towards KAAZ.

heebyJeebies · Post by **heebyJeebies** » January 27th, 2011, 7:46 am

the shitbox nissan?

your ad here said it was in great condition and a good daily............ dont trust this one fellas

ClassicAU · Post by **ClassicAU** » January 27th, 2011, 8:00 am

Ha, yeah, it’s a 20 year old Pulsar. It’s a shitbox no matter how good condition it’s in! I was kinda sad to see it go to be honest, had a few laughs in that bomb around, was good value.

Anyway, I couldn’t care less. Of all the 8 cars I have now sold, NONE of them have been sold on the forums!

heebyJeebies · Post by **heebyJeebies** » January 27th, 2011, 8:06 am

vectors are great daily's....... but yeah a shitbox in the grand scheme of things

ClassicAU · Post by **ClassicAU** » January 27th, 2011, 3:40 pm

KAAZ FTMFW!! I think it was always going to go that way in the end, seems to be the most logical choice. Dropping it off at the diff builder next Tuesday arvo, hoping to get it back by Thursday ripe for skids!! Well, not quite, will have to run it in first.

EBOOST · Post by **EBOOST** » January 27th, 2011, 3:48 pm

are u changing the gears also?
sorry if it says back a page i cbf looking.
my brothers has 3.7's now and it made it feel heaps better.
cheers josh.

ClassicAU · Post by **ClassicAU** » January 27th, 2011, 4:01 pm

I thought about it Josh, but decided against it for now. After I finish with the driveline refresh, my long term goal is to get a 347 stroker kit!! So I figured with the torque it'd be pushing out, no need to change diff ratio anyway.

EBOOST · Post by **EBOOST** » January 27th, 2011, 4:54 pm

ud be suprised mate.
they are torquey but a diff change really does wake these things up, and how long do u think it will be until it gets rebuilt to 347?
have u looked into the price?
if u do it dont use gt40p its just a waste imo.
i would be changing the gears without a doubt my old au had 3.9's with a t5 and it was great and my brothers has 3.7's and i wouldnt go back to 3.45's either would he.
cheers josh.

ClassicAU · Post by **ClassicAU** » January 28th, 2011, 9:03 am

No idea if/when the stroker kit will happen mate, quite a few things that need doing before then. Clutch is next, then suspension, then tyres (if these ones last that long!

), then maybe an exhaust.
So you think the GT40P's are no good hey? That’s interesting, I was under the impression they were ok. I could possibly end up just freshening up the motor with consumables and get a tune and been happy with that. I just want to fix the running gear first.

Anyway, I called up the diff bloke again this morning. I’m sure he hates me already. They don’t have any 3.7’s on the shelf, which means they need to order new ones at $700!! They have 3.9’s, but I don’t particularly want the V8 to be doing 2600rpm on the freeway and be watching the fuel disappear! So 3.45’s will stay.

Post by **EFFalcon** » January 28th, 2011, 9:06 am

fuel econ difference will be negligable between 3.7's and 3.9's
i'd do it.

AaronEF8 · Post by **AaronEF8** » January 28th, 2011, 9:39 am

You'd be better off buying alloy heads and running them instead of using GT40p heads on a stroker.

ClassicAU · Post by **ClassicAU** » January 28th, 2011, 9:43 am

EFFalcon wrote:fuel econ difference will be negligable between 3.7's and 3.9's
i'd do it.

I guess, but the difference between 3.45 and 3.89 will be quite a bit. I use the freeway too often to go that short, and be revving so high. In the I6 it was ok, but the V8 will drink too much. I'm happy to stick with the 3.45's, it still skids fine with them now!

As for the heads, you are probably right, a nice set of AFR's or the like would go down well. Like I said, that is still a long way off though.

SnyperEB · Post by **SnyperEB** » January 28th, 2011, 10:37 am

Leave as is and enjoy. You know you get upset and bitch and moan when you mod and something goes wrong.

ClassicAU · Post by **ClassicAU** » January 28th, 2011, 10:55 am

Hahaha, yep, this is true! Tis why ratio will not change. KAAZ will be installed, then I will move on to the next target.

By the way, damn you for getting in on the silver one before I had a chance to go back! I think yours is in better nick than mine too, just higher kms. Me likey premo sound and brakes though!

SnyperEB · Post by **SnyperEB** » January 28th, 2011, 11:00 am

Yeah sorry about that I took it for one drive, went over it for everything he said it had and said yes right there and then. I wanted something that was mint and this was by far and away the best I had seen.

Post by **EFFalcon** » January 28th, 2011, 11:01 am

that and its not red..

red sucks

(way to offend 2 people at once

)

ClassicAU · Post by **ClassicAU** » January 28th, 2011, 11:22 am

lol John, good work! You are right though, red is pretty ghey. I just bought it anyway cos it has the options and is clean. Plus was a decent price too, just shy of $10k.

SnyperEB · Post by **SnyperEB** » January 28th, 2011, 11:56 am

I had a look at a red one but two red cars FTL. F U John!!

EBOOST · Post by **EBOOST** » January 28th, 2011, 2:29 pm

why does everyone think that diff gears are gonna make it the biggest petrol guzzler?
i had 347 and 3.9's and t5 and got 680km out of a tank to albury and thrashing it around there then halfway back.
my brother only got 40km more out of his and he has 3.45's and just exhaust and tune.
as i said i wouldnt even go back to 3.45's in my au and my brother wouldnt either.
cheers josh.

nothin suss · Post by **nothin suss** » January 28th, 2011, 3:02 pm

I never noticed much fuel consuption difference in a Windsor from 3.2 to 3.7's...
Good performance gain. I'd say going from 3.45 to 3.7 wouldn't be ultra beneficial.

EBOOST · Post by **EBOOST** » January 28th, 2011, 6:04 pm

yeah i wouldnt have thought so either but it honestly made my brothers au3 xr8 alot better to drive and feels alot better.
i thought the same as i was trying to convince him to go for 3.9's but he wouldnt budge from 3.7's and i drove it after it was all run in and it honestly made a huge difference.
also dont be suprised if the gears are no good anyway my brother only upgraded as his gears were worn really badly and they couldnt lap them or do anything with them and they said au irs gears are very common to be like that.
cheers josh.

ClassicAU · Post by **ClassicAU** » January 29th, 2011, 12:08 pm

Well, if my gears are that stuffed and I have no other choice, then I will get them to put the 3.9s in they apparently have on the shelf. If not, I am sticking with 3.45s, end of story.

justa6 · Post by **justa6** » January 29th, 2011, 2:46 pm

EFFalcon wrote:that and its not red..

red sucks

(way to offend 2 people at once )

what's wrong with red, they go faster ha ha. i think they look good.

nstg8a · Post by **nstg8a** » January 29th, 2011, 3:54 pm

ClassicAU wrote:Well, if my gears are that stuffed and I have no other choice, then I will get them to put the 3.9s in they apparently have on the shelf. If not, I am sticking with 3.45s, end of story.

dont tell them that when you drop the car off... you could almost guarantee they would 'find' your diff gears to be rooted and need replacing if they know your willing to pay for a new set.

ClassicAU · Post by **ClassicAU** » January 31st, 2011, 8:12 am

Thanks mate, I have been burned enough times now to hopefully not let it happen again. I don't really want to change ratio, so if they call me to tell me I “have” to, then they will be giving me the cheapest option. I’ll try and save the arse rapings for when the time comes to work the motor.

EBOOST · Post by **EBOOST** » January 31st, 2011, 8:30 am

save the arse raping for the motor yet ull put a kazz in a stock au xr8?
i can understand u are going to work it but i dont see u going very far with it sorry.
ur already saying u dont like the red so thats not a good start lol.
good luck with it though.
cheers josh.

ClassicAU · Post by **ClassicAU** » January 31st, 2011, 8:48 am

Yeah, but I’m finally taking the ‘do it once, do it right’ approach with this car. I did the stock rebuild already, and it didn’t last. Plus, I’m a car destroyer, so I figured it was required!
Nah, your right Josh, I probably wont go very far with it engine wise. Whatever I do end up doing won’t test the drive line out at all. But it will be nice to drive it hard and not shit myself every time I slip the clutch!
Haha, yes red is not the most desirable of the colours, but it does come up nice with a wash. I’ll get it cut and polished one day too. I still like it, plus I’m not looking at it on the outside when I am enjoying it most anyway!

EBOOST · Post by **EBOOST** » January 31st, 2011, 8:59 am

thats good then mate.
go down to flexifit in hoppers crossing and ask for a paceys and a full twin system.
then get a k&n filter and a tune and it should do 180+rwkw.
my brothers pulled 193rwkw with those mods and it feels nice and strong through the revs
his is 220kw but the 200 cam is a little more aggresive i have heard and the bigger throttle body apparently doesnt do alot for them sours should pull just as good numbers.
cheers josh.

Post by **EFFalcon** » January 31st, 2011, 9:02 am

get some 1.7RR"s

EBOOST · Post by **EBOOST** » January 31st, 2011, 9:05 am

pull a rocker cover off first ive heard of a few 200kw versions having them already from the factory.
cheers josh.

ClassicAU · Post by **ClassicAU** » January 31st, 2011, 9:15 am

Thanks for the info Josh, I hope to get all that stuff done eventually. That definitely includes 1.7 roller rockers too, thanks John!

Wont be done until I am happy with the drive line first though.
I’ll keep an eye on flea-bay for headers though, cos the last quote I got from my exhaust bloke for Pacies was $1100 new! He recons the stock headers are not that much worse though.
I doubt mine has 1.7’s in it already either, being an early series 2. Not sure what month, but it’s a 2000 model.

EBOOST · Post by **EBOOST** » January 31st, 2011, 9:39 am

yeah i doubt it would then.
yeah paceys for these are expensive but $1100 sounds verry very steep i think my brother paid $770 for his.
ring vpw and tell them ur a mechanic and ask.
mate of mine got his for his xw from them for $480 for windsor.
the standard 220 ones are good the 200 ones are a little more restrictive i heard.
cheers josh.

ClassicAU · Post by **ClassicAU** » January 31st, 2011, 3:11 pm

Eh all in good time, I’ll get to the front eventually, I am working forward on this one. Hopefully after it goes in tomorrow afternoon I’ll have a much tighter drive line. The back lash on it at the moment is terrible! Then I get to run it in for a bit, which should be interesting. Something about slow first gear figure 8’s for a KAAZ? I’m sure they’ll tell me.

Moving forward, what are the gear boxes in these things like strength wise, anyone know? I believe it’s a T5Z or something, being an XR8? Just wondering if it’s prone to death like all T5’s or not. Seems fine to me so far, feels about the same as any other T5 I have driven, maybe a little heavier if anything.

EBOOST · Post by **EBOOST** » January 31st, 2011, 3:42 pm

i think it was only the 220's that got the t5z but they arent that much better than standard t5 anyway so u wouldnt bother hunting one down.
my au's t5z took my 210rwkw but im not that hard on cars.
hunt one down and sit it in the spare room for when u break it lol.
cheers josh.

private9 · Post by **private9** » January 31st, 2011, 3:44 pm

Ev, $1100 for the Paceys is mega expensive!

ClassicAU wrote:Eh all in good time, I’ll get to the front eventually, I am working forward on this one. Hopefully after it goes in tomorrow afternoon I’ll have a much tighter drive line. The back lash on it at the moment is terrible! Then I get to run it in for a bit, which should be interesting. Something about slow first gear figure 8’s for a KAAZ? I’m sure they’ll tell me.

Half an hour of figure 8s is correct - enjoy feeling dizzy as well as the strange looks you get while doing it!

ClassicAU · Post by **ClassicAU** » January 31st, 2011, 3:59 pm

Half an hour!! Can I at least stop for a spew half way?!? Haha, I assume it doesn't all have to be done at once right? I'll try and get it out over the course of the day.

nstg8a · Post by **nstg8a** » January 31st, 2011, 4:03 pm

whats it costing to get it fitted?

nothin suss · Post by **nothin suss** » January 31st, 2011, 4:18 pm

$1100 would probably be correct for a fitted price.
Theres a few hours stuffing about, gaskets, adapting to existing cats etc.

I'd be also curious to find out what a KAAZ costs for installation.